Analysis on Influence of Varying Compression Ratio in Biofuel

Article Preview

Abstract:

In order to reduce the need of petroleum fuels, the prospect of finding the alternative fuel is a primary goal. This work deals with the cause of mustard oil as a possible alternative. The physical and chemical properties of mustard oil are investigated. Using the gas chromatography, the composition of mustard oil is checked. Transesterification process is used for converting the mustard oil into biodiesel. Biodiesel thus formed is converted into bio fuel by the addition of an oxygenated additive (methanol). The current experiment is performed by varying the compression ratio by 16, 17 and 18 using bio fuel which comprises of 80% of mustard oil biodiesel and 20% of methanol in the diesel engine. Emission aspects of bio fuel are investigated. From this experiment it is observed that, by increasing the compression ratio CO and smoke emissions were slightly reduced, whereas HC emission is significantly reduced. However, the emissions of NOx were found to be on higher side.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

734-738

Citation:

Online since:

September 2016

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2016 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] Fernando, Sandun, Chris Hall, and Saroj Jha. NOx Reduction from Biodiesel Fuels, Energy Fuels. 20 (2006) 376–382.

DOI: 10.1021/ef050202m

Google Scholar

[2] Knothe, Gerhard, and Kevin R. Steidley. Lubricity of Components of Biodiesel and Petrodiesel, The Origin of Biodiesel Lubricity. Energy Fuels 19 (2005)1192–1200.

DOI: 10.1021/ef049684c

Google Scholar

[3] Srivastava, Anjana, and Ram Prasad. Triglycerides-Based Diesel Fuels, Renewable and Sustainable Energy Reviews 4 (2000) 111–133.

DOI: 10.1016/s1364-0321(99)00013-1

Google Scholar

[4] A. Srivasata and R. Prasad, Triglyceride based diesel Fuels, Renewable and sustainable Energy Reviews. 4 (2000)111-133.

Google Scholar

[5] J. Van Gerpen, Cetane Number Testing of Biodiesel, Liquid Fuels and Industrial Products from Renewable Resources—Proceedings of the Third Liquid Fuels Conference, Nashville (1996) 166-176.

Google Scholar

[6] A.B.M.S. Hossain and M.A. Mazen, Effects of catalyst types and concentrations on biodiesel production from waste soybean oil biomass as renewable energy and environmental recycling process, Australian journal of crop science. 4 (2010) 550-555.

Google Scholar

[7] H.M. Dharmadhikari, Puli Ravi Kumar, S. Srinivasa Rao, Performance and emissions of C.I. engine using blends of biodiesel and diesel at different injection pressures, International journal of applied research in mechanical engineering. 2(2012).

DOI: 10.47893/ijarme.2013.1077

Google Scholar

[8] Gaurav Dwivedi, Siddharth Jain, M.P. Sharma, J. Mater, Diesel engine performance and emission analysis using biodiesel from various oil sources – Review, Environ. Sci. 4 (2013), 434-447.

Google Scholar