Increasing the Format-Flexibility of Packaging Machines: Experimental Study on Laser Beam Sealing and Cutting

Abstract:

The improvements of the format-flexibility as well as the resource and energy efficiency are important for the users and manufacturers of packaging machines. There is a positive interconnection of resource and energy efficiency with format-flexibility because e.g. the reduction of stand-by phases. To reach these goals, it is necessary to reduce the downtime and to increase the overall equipment effectiveness (OEE). The application of laser beam based processing technologies is very common in many different branches, e.g. automotive. One big advantage of the laser beam as a working tool is the high inherent flexibility. Different contours could be sealed and cut without any changeover by the use of flexible motion systems, e.g. deflection units or robots. However, there is a lack of use of laser based technologies in packaging machines. The focus of this paper is the experimental investigation of laser beam sealing and cutting with the same laser source. For this a 2 μm diode-pumped thulium fiber laser is used. Furthermore a flexible processing device will be shown and the practical use will be demonstrated.

• Periodical: Applied Mechanics and Materials (Volume 856)
• Pages: 201-208
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.856.201
• Online since: November 2016
• Authors: Georg Götz*, Johannes Fink, Christoph Richter, Gunther Reinhart
• Keywords: Format-Flexibility, Laser Beam Cutting, Laser Beam Sealing, Packaging Machine

References

[1] Roland Berger, Mastering product complexity 2012, http: /www. rolandberger. us/media/pdf/Roland_Berger_Mastering-Product-Complexity_20121107. pdf, (2012).

[2] A. Sethi, S. Sethi, Flexibility in Manufacturing: A Survey, The International Journal of Flexible Manufacturing Systems 2 (1990), p.289–328.

[3] G. Götz, P. Stich, J. Backhaus, G. Reinhart, Design Approach for the Development of Format-Flexible Packaging Machines, International Conference on Mechatronics and Computational Mechanics 2016, 07-08 January, 2016, Singapore.

[4] G. Götz, P. Stich, S. Thunig, J. Glasschröder, G. Reinhart, Improving Resource and Energy Efficiency of Packaging Machines: Contribution of an Increasing Format Flexibility, Applied Mechanics and Materials, Vol. 805 (2015), pp.257-264.

DOI: 10.4028/www.scientific.net/amm.805.257

[5] U. Russek: Prozesstechnische Aspekte des Laserdurchstrahlschweißens von Thermoplasten, PhD thesis, Rheinisch-Westfälischen Technischen Hochschule Aachen, (2006).

[6] R. Poprawe: Lasertechnik für die Fertigung, Springer, Berlin, (2005).

[7] N. Brown, D. Kerr, M.R. Jackson, R.M. Parkin, Laser welding of thin polymer films to container substrates for aseptic packaging, Optics & Laser Technology 32 (2000), pp.139-146.

DOI: 10.1016/s0030-3992(00)00033-5

[8] J.P. Coelho, M.A. Abreu, M.C. Pires, High-speed laser welding of plastic films, Optics and Lasers in Engineering 34 (2000), pp.385-395.

DOI: 10.1016/s0143-8166(00)00071-3

[9] S. Polser, Laserdurchstrahlschweißen transparenter Polymerbauteile, Meisenbach Verlag, Bamberg, (2009).

[10] M. Devrient, T. Frick, M. Schmidt, Laser transmission welding of optical transparent thermoplastics, Physics Procedia 12 (2011), pp.157-165.

DOI: 10.1016/j.phpro.2011.03.020

[11] N. Brown, D. Kerr, R.M. Parkin, M.R. Jackson, F. Shi, Non-contact laser sealing of thin polyester food packaging films, Optics and Lasers in Engineering 50 (2012), pp.1466-1473.

DOI: 10.1016/j.optlaseng.2012.04.001

[12] I. Mingareev, F. Weirauch, A. Olowinsky, L. Shah, P. Kadwani, M. Richardson, Welding of polymers using a 2 µm thulium fiber laser, Optics & Laser Technology 44 (2012), p.2095-(2099).

DOI: 10.1016/j.optlastec.2012.03.020

[13] C. Dowding, R. Dowding, J. Griffiths, J. Lawrence, Peel resistance characterization of localized polymer film bonding via thin film adhesive thermally activated by scanned CO2 laser, Optics & Laser Technology 48 (2013), p.358–365.

DOI: 10.1016/j.optlastec.2012.11.009

[14] R. Jänchen, M. Brosda, G. Wendt, A. Olowinsky, Laserdurchstrahlsiegeln von Verpackungsfolien, www. verpackungswirtschaft. de, 3 (2014), pp.46-49.

[15] R. Jänchen, G. Wendt, Laserdurchstrahlfügen von thermoplastischen Folien, Verpackungssymposium 2015, 17-18 September, 2015, Kempten, Germany.

[16] DIN 55529, Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material, Beuth, Berlin, (2012).