Mechanical and Corrosion Tests on Iron-Based Reinforced Parts Obtained by Powder Metallurgy

Abstract:

Samples from high compressibility powders (Ancorsteel 1000B) obtained by pressing at different pressures and sintering at 1150 °C, with (IPASW) and without spring steel wire (Φ = 0.5 mm) reinforcement (IPAS), coated and uncoated with zinc samples were selected for study of corrosion behaviour in salt spray and were subjected to mechanical tests (tensile strenght).

• Periodical: Applied Mechanics and Materials (Volume 880)
• Pages: 291-296
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.880.291
• Online since: March 2018
• Authors: Anca Didu*, Violeta Cristina Contoloru, Gelica Stanescu, Cristina Ploscaru
• Keywords: Corrosion, Mechanical Test, Powder Parts, Salt Spray Environment

References

[1] H. Ashassi-Sorkhabi, D. Seifzadeh, H. Harrafi, Phosphatation of iron powder metallurgical samples for corrosion protection, J. Iran. Chem. Soc. 4 (2007) 72-77.

DOI: 10.1007/bf03245805

[2] J. Li, Y. Yin, H. Ma, Preparation and properties of Fe 3 Al-based friction materials, Tribology International 38 (2005) 159-163.

DOI: 10.1016/j.triboint.2004.07.024

[3] R.Z. Xu, Powder Metallurgy Structural Materials, Changsha Publishing Company of Central South University of Technology, (2002).

[4] T. Okuno, N. Yashiro, The Improvement in Strength of Sintered Machine Parts, NTN Technical Review, 82 (2014) 21-25.

[5] A. Bautista, F. Velasco, S. Guzmán, D. de la Fuente, F. Cayuela, M. Morcillo, Corrosion behavior of powder metallurgical stainless steels in urban and marine environments, Rev. Metal., 42 ( 2006) 175-184.

DOI: 10.3989/revmetalm.2006.v42.i3.17

[6] M.G. Fontana, Corrosion Engineering, McGraw-Hill, New York, USA, (1986).

[7] A. Molinari, G. Straffelini, Wear processes in high-strength sintered alloys under dry rolling-sliding, Wear., 173 (1994) 121-128.

DOI: 10.1016/0043-1648(94)90264-x

[8] A. Aran, Manufacturing properties of engineering materials, Lecture notes, (2007).

[9] J.D.B. De Mello, I.M. Hutchings, Effect of processing parameters on the surface durability of steam-oxidized sintered iron, Wear, 250 (2001) 435-448.

DOI: 10.1016/s0043-1648(01)00632-9

[10] S. C. Lim, J. H. Brunton, The unlubricated wear of sintered iron, Wear. 113 (1986) 371-382.

DOI: 10.1016/0043-1648(86)90035-9

[11] E. R. Leheup, D. Zhang, J.R. Moon, Wear. 176 (1994) 111-119.

[12] A. Didu, Studies on corrosion behavior in a pollutant environment of iron-based composites reinforced with high reyistant steel yarns - PhD thesis, (2013).

[13] A. Samide, B. Tutunaru, A. Didu, C. Luculescu, C. Tigae, C. Spinu, M. Preda,. Int. J. Electrochem. 8 (2013) 5108-5120.