Age-Hardening of Rheo-High Pressure Die Cast Al-Alloy 6066

Abstract:

Al-Mg-Si-Cu alloy 6066 is a heat-treatable wrought alloy that is commonly used in high performance bicycle frames. Wrought alloys are difficult to cast using conventional liquid casting techniques, as hot tearing can occur. However, a method that effectively reduces that risk is rheo-high pressure die casting (R-HPDC). Casting alloy 6066 using semi-solid metal processing makes it possible to be used for near-net shape forming of components. This study investigates the age-hardening response of R-HPDC alloy 6066. The effects of different solution heat treatments, natural pre-ageing and artificial ageing are studied. The different solution heat treatments investigated are a one-step and a two-step solution treatment. The one-step treatment was performed at 530°C only and the two-step treatment at 530°C followed by 550°C. It is shown that natural pre-ageing has a detrimental effect on the T6 properties and that the longer two-step solution heat treatment is justified due to an increase in hardness and prevention of incipient melting. The Vickers hardness in different temper conditions (F, T4, T5 and T6) were determined and compared to the typical hardness values of the alloy in the wrought condition.

• Periodical: Advanced Materials Research (Volume 1019)
• Pages: 47-54
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1019.47
• Online since: October 2014
• Authors: Carlien Taute*, Heinrich Möller
• Keywords: Age-Hardening, Alloy 6066, Rheo-High Pressure Die Casting (R-HPDC), Solution Heat Treatment, Vickers Hardness

References

[1] Information on http: /www. pa-international. com. au [Accessed: December 2013].

[2] Information on http: /www. azom. com [Accessed: December 2013].

[3] U.A. Curle; H. Möller; G. Govender, R-HPDC in South Africa. Solid State Phenomena 192-193 (2013) 3-15.

DOI: 10.4028/www.scientific.net/ssp.192-193.3

[4] H. Möller; P. Daswa; G. Govender, The mechanical properties of rheo-high pressure die cast Al-Mg-Si-(Cu) 6xxx series alloys. Submitted to the 13th International Conference on Semi-Solid Processing of Alloys and Composites, Muscat, Oman, 15-17 September (2014).

DOI: 10.4028/www.scientific.net/ssp.217-218.61

[5] E. Tan; B. Ögel, Influence of Heat Treatment on the Mechanical Properties of AA6066 Alloy. Turkish Journal of Engineering and Environmental Sciences 31 (2006) 53-60.

[6] Information on http: /www. matweb. com [Accessed: December 2013].

[7] G. Mrówka-Nowotnik, Transformation of intermetallic phases in 6066 aluminium during its homogenization. Solid State Phenomena 186 (2012) 319-322.

DOI: 10.4028/www.scientific.net/ssp.186.319

[8] H. Möller, P. Daswa, G. Govender, The heat treatment of rheo-high pressure die cast Al-Mg-Si-(Cu) 6xxx series alloys. Materials Science Forum 794-796 (2014) 137-142.

DOI: 10.4028/www.scientific.net/msf.794-796.137

[9] P. Daswa; H. Möller; M. du Toit; G. Govender, The solution heat treatment of rheo-high pressure die cast Al-Mg-Si-(Cu) 6xxx series alloys. Submitted to the 13th International Conference on Semi-Solid Processing of Alloys and Composites, Muscat, Oman, 15-17 September (2014).

DOI: 10.4028/www.scientific.net/ssp.217-218.259

[10] G. Sha; H. Möller; W.E. Stumpf; J.H. Xia; G. Govender; S.P. Ringer, Solute nanostructures and their strengthening effects in Al–7Si–0. 6Mg alloy F357, Acta Materialia 60 (2012) 692-701.

DOI: 10.1016/j.actamat.2011.10.029

[11] S. Wenner; C.D. Marioara; S.J. Andersen; R. Holmestad, Effect of room temperature storage time on precipitation in Al-Mg-Si(-Cu) alloys with different Mg/Si ratios. Presented at the first European Conference on Aluminium Alloys (ECAA), Bremen, Germany, 5-7 October (2011).

DOI: 10.3139/146.110795

[12] S. Seiffeddine; E. Sjölander, The influence of natural ageing on the artificial ageing response of Al-Si-Mg-Cu casting alloys. Materials and Manufacturing-Casting. Paper presented at International Conference High tech Die Casting, Vicienza. (2012).

DOI: 10.1016/j.msea.2011.06.036

[13] C.D. Marioara; S.J. Andersen; J. Jansen; H.W. Zandbergen, The influence of temperature and storage at RT on nucleation of the β" phase in a 6082 Al-Mg-Si alloy. Acta Materialia 51 (2003) 789-796.

DOI: 10.1016/s1359-6454(02)00470-6