The Synthesis of Xylene Formaldehyde Unsaturated Polyester Resin and its Application in the Putty

Fang Fang Liu; Qian Nan Feng; Xue Hui Yuan; Xin Wei Liu

doi:10.4028/www.scientific.net/AMR.1051.294

Paper Titles

Study on the Fire Retardant Treatment Technologies of Bamboo Particleboard
p.273

Effect of Microstructure of Graphene Oxide Fabricated Composite Membranes on Alcohol Dehydration
p.278

The Effect of Deformation on the Carbide Precipitation Morphology in the Ti Microalloyed Steel
p.283

Reaction Performance of Propylene Carbonate Manufacturing by Using a Green Synthetic Route
p.289

The Synthesis of Xylene Formaldehyde Unsaturated Polyester Resin and its Application in the Putty
p.294

The Synthesis from α-SiO₂ and Graphite System to Coesite under High Temperature High Pressure
p.299

Water/Alcohol Soluble Poly(3-Alkylthiophene) Derivative Self-Assembly with Fullerene Derivative via Hydrogen Bonding
p.303

Phylum-Specific Primer Design and Implication in Quantification of the Microbial Community Structure in GuJingGong Pit Mud
p.311

Methane Generation via Two-Phase Anaerobic Digestion of Organic Fraction of Municipal Solid Wastes
p.317

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1051The Synthesis of Xylene Formaldehyde Unsaturated...

The Synthesis of Xylene Formaldehyde Unsaturated Polyester Resin and its Application in the Putty

Abstract:

The xylene formaldehyde unsaturated polyester resin was synthesized with glycol, xylene formaldehyde resin and maleic anhydride (MA) as raw materials using styrene as diluent. It was used in putty. The dosage of hydroquinone (HQ), propylene glycol (PG) and diethylene glycol (DEG) mole ratio on the influence of the synthesis of the resin and the performance of the putty. The results show that the amount of HQ is about 0.03% of the total mass. the synthetic process is smoothly and the curing performance of the resin is better. The premise is that the mass of PG and DEG possesses 4.5% of the xylene formaldehyde resin mass. Mole ratio of PG and DEG (PG-DEG ratio: 1: 2mol/mol) is critical for high yield.

You might also be interested in these eBooks

Applied Engineering Decisions in the Context of Sustainable Development

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1051)

Pages:

294-298

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1051.294

Citation:

Cite this paper

Online since:

October 2014

Authors:

Fang Fang Liu*, Qian Nan Feng, Xue Hui Yuan, Xin Wei Liu

Keywords:

Application, Putty, Synthetic, Xylene Formaldehyde Unsaturated Polyester Resin

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Y M SUN, Z B XU. The synthesis of high reactivity xylene unsaturated polyester resin [J]. Thermosetting resin, 2002(17): 22-24.

Google Scholar

[2] Y X SUN. The development of xylene unsaturated polyester resin [J]. Liaoning chemical industry, 1997(26): 172-174.

Google Scholar

[3] W H LI, Z Q ZHENG. Xylene unsaturated polyester resin [J]. Jiangsu chemical industry, 1980(3): 26-31.

Google Scholar

[4] D S WU. The research of xylene unsaturated polyester resin [J]. Glass fiber reinforced plastic/composite materials, 1996(6): 17-20.

Google Scholar

[5] D R WANG. The production and application of xylene unsaturated polyester resin [J]. Glass fiber reinforced plastic/composite materials, 1998(4): 24-26.

Google Scholar

[6] Y N HE, Z M YAN. The preparation and application of the new unsaturated polyester - xylene unsaturated polyester resin [J]. Plastics industry, 1983(6): 13-16.

Google Scholar