Inline Rolling of 5182 Aluminum Alloy Strip Cast by a Vertical Type High Speed Twin Roll Caster

Ryoji Nakamura; Shuya Hanada; Shinji Kumai; Hisaki Watari

doi:10.4028/www.scientific.net/AMR.139-141.477

Paper Titles

Preparation and Process Optimization of Ni-Tl-B Coating with Fretting Damage Resistance
p.460

Research on Nano-Coating Absorption Application in Laser Processing
p.464

Effect of Rare Earth on Microstructure and Properties of the Self-Propagating Spraying Coating
p.468

Camouflage Coatings Design and Optimization of Construction Machinery
p.472

Inline Rolling of 5182 Aluminum Alloy Strip Cast by a Vertical Type High Speed Twin Roll Caster
p.477

Roll Casting of Al-SiC_p Composite Strip
p.481

Compaction Experiment on the Newly Designed Warm High Velocity Compaction Equipment
p.485

Numerical Simulation of Forming Force in Tube Multi-Point Forming
p.489

Glass Forming Ability and Non-Isothermal Crystallization Kinetics of Zr₆₄Al_10.1Cu_11.7Ni_14.2 Metallic Glass
p.493

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 139-141Inline Rolling of 5182 Aluminum Alloy Strip Cast...

Inline Rolling of 5182 Aluminum Alloy Strip Cast by a Vertical Type High Speed Twin Roll Caster

Abstract:

An inline hot rolling was operated on 5182 aluminum alloy strip cast using a vertical type high speed caster (VHSTRC) at the speed of 60 m/min. A porosity existing at center line of the thickness and a ripple mark on the surface, these are typical defects of the strip cast by the VHSTRC, could be improved by the inline rolling. The rolling speed was as same as the roll-casting-speed of 60m/min. The temperature of the strip, when the inline rolling was operated, was 450oC. The reduction of the strip of the inline rolling was 35%.