High Speed Machining: A Review from a Viewpoint of Chip Formation

Toshiyuki Obikawa; Masahiro Anzai; Tsuneo Egawa; Norihiko Narutaki; Kazuhiro Shintani; Etsuo Takeoka

doi:10.4028/www.scientific.net/AMR.188.578

Paper Titles

3D Finite Element Simulation on the Orthogonal Cutting Processes with Different Commercial Codes
p.555

Vibration Analysis on Ball End Milling Hardened Mould Assembled with Different Hardness Materials
p.561

Finite Element Analysis and Calculation of Load Capacity on Aerostatic Thrust Bearing
p.566

Cutter/Work Interference and Surface Generation in Ball End Milling
p.572

High Speed Machining: A Review from a Viewpoint of Chip Formation
p.578

Robotic High Speed Machining of Aluminum Alloys
p.584

The Numerical Simulation of the Aluminum Alloy Processing
p.590

Thermal Analysis of High Speed Built-In Spindle by Finite Element Method
p.596

Modal Analysis of Externally Pressurized Air Bearing Workbench Based on Spring-Mass System Method
p.602

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 188High Speed Machining: A Review from a Viewpoint of...

High Speed Machining: A Review from a Viewpoint of Chip Formation

Abstract:

This paper describes strong nonlinearity in log V-log L relationship, which is often found in machining of supperalloys, titanium alloys, hardened steels, cast irons, etc. The nonlinearity plays an important and favorable role in extension of life-span cutting distance at higher cutting speeds; that is, in a certain range of cutting speed, life-span cutting distance increases with cutting speed. Results of tool wear in a sliding test and cutting experiments, which showed the evidences of strong nonlinearity, were investigated and the mechanisms causing the nonlinearity were discussed.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 188)

Pages:

578-583

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.188.578

Citation:

Cite this paper

Online since:

March 2011

Authors:

Toshiyuki Obikawa, Masahiro Anzai, Tsuneo Egawa, Norihiko Narutaki, Kazuhiro Shintani, Etsuo Takeoka

Keywords:

High Speed Machining (HSM), Life-Span Cutting Distance, Machinability Improvement, Tool Life

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] T. Obikawa, in: Metals Handbook, edtied by K. Waseda, Maruzen, Tokyo, (2000) (in Japanese).

Google Scholar

[2] T. Obikawa, in: JSME Mechanical Engineers' Handbook (part b3), edited by H. Okamura, Maruzen, Tokyo, (2006) (in Japanese).

Google Scholar

[3] T. Egawa, T. Ichikizaki, M. Kuroda, Y. Hiasa and H. Tsukamoto: J. Japan Soc. Prec. Eng. Vol. 61 (1995), p.809 (in Japanese).

Google Scholar

[4] N. Narutaki, in: Machining of Difficult-to-Machine Materials, The Nikkan Kogyo Shimbun, Tokyo, (1989) (in Japanese).

Google Scholar

[5] E. Takeoka and T. Miyaguchi: Tool Engineer Vol. 42, No. 4 (1998), p.24 (in Japanese).

Google Scholar

[6] E. Takeoka: Tool Engineer Vol. 39, No. 4 (1995) p.2 (in Japanese).

Google Scholar

[7] T. Suzuki, T. Maruoka, H. Kaneko, I. Takahashi, M. Anzai and S. Hirai, in: Proc. Kanto Branch's Joint Conf., JSME, Saitama city (2007) p.29 (in Japanese).

Google Scholar

[8] J. Barry, G. Byrne and D. Lennon: Int. J. Mach. Tools Manuf. Vol. 41 (2001), p.1055.

Google Scholar

[9] K. Shintani, in: Machining of Austempered Spheroidal Graphite Cast Iron (ADI), edited by K. Uehara, The Japan Society of Precision Engineering, Tokyo, (1995) (in Japanese).

Google Scholar

[10] Y. Ohbuchi and T. Obikawa: J. Eng. Mater. Tech. Vol. 125 (2003), p.324.

Google Scholar