Crude Oil Adsorption on Fe2O3/EPDM Composite to the outside Environmental Variations

Xiu Qi Liu; He Qin Xing

doi:10.4028/www.scientific.net/AMR.415-417.191

Paper Titles

Microstructure and Wear Properties of In Situ TiC-Cr₇C₃/Fe Surface Composite
p.170

Effect of Manganese Ions on Corrosion Inhibition of PANI for Mild Steel in 0.5 M H₂SO₄
p.174

Low Temperature Fabrication of Platinum/Carbon Black Powder Coating
p.178

Accelerated Aging Test and Study of Storage Life Prediction of NBR O-Ring
p.184

Crude Oil Adsorption on Fe₂O₃/EPDM Composite to the outside Environmental Variations
p.191

Metal Ions Doped Complex Cobalt Blue Pigment Research
p.194

Hysteresis Heat Build-up and Low Temperature Processing of Polymer under the Vibration Force Field
p.200

TiCl₄ Treatment to the Substrate of Dye-Sensitized Solar Cell for the Applications on BIPV
p.205

Microstructure Analysis of in-Plane Quasi-Isotropic Composites Reinforced by Multi-Direction and Multi-Layer Three Dimensional Fabric
p.210

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 415-417Crude Oil Adsorption on Fe2O3/EPDM Composite to...

Crude Oil Adsorption on Fe₂O₃/EPDM Composite to the outside Environmental Variations

Abstract:

In our study, a new kind of material for oil adsorption was prepared by melt blending with EPDM as the matrix and roasting Fe₂O₃ as the filler. By considering the influence of pH, temperature, stirring speed on adsorption capacity. The results showed that the environmental pH has little effect on the crude oil absorbency of the composite; “Room temperature” is the optimum temperature; increased the stirring speed can reduce the adsorption time.