Preparation and Properties of Castor Oil-Based Waterborne Polyurethane Terminated

Abstract:

Prepared a series of castor oil modified NaHSO₃ waterborne blocked polyurethane, discussed the influence on the emulsion stability by C.O. addition amount, R value, DMPA and the influences on latex film mechanical property and water absorption by C.O. content, R value. Then analyzed the characterization by FTIP and DSC, its shown that emulsion is stable when the R value controlled in the range of 1.4~1.8 and the stability will become poor with the increase of C.O. content; and with the increase of R value the elongation at break of latex film reduced and tensile strength increased. In short the C.O.s mixing can make latex film initial decomposition temperature increased by 60, reduced elongation at break, increased tensile strength and reduced the water absorption.

• Periodical: Advanced Materials Research (Volume 427)
• Pages: 98-103
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.427.98
• Online since: January 2012
• Authors: Wei Hong, Qing Shan Li, Wei An Yu, Jing Sun, Jun Liu, Guang Zhong Xing
• Keywords: Blocked, Castor Oil, Environment-Friendly, Waterborne Polyurethane

References

[1] Z. L. Yang, D. A. Wick and Hoyle CE, et al.: Newly UV-curable polyurethane coatings prepared by multifunctional thiol and eneteminated polyurethane aqueous dispersions mixtures: prepared and Characterization. Polymer, Vol. 50(2009), pp.1717-1722.

DOI: 10.1016/j.polymer.2008.12.018

[2] E. Shi, W. X. Huang and Z. Y. Xiao, et al.: Tang, Influence of binding interface between active and sup-port layers in composite PDMS membranes on permeation performance. Journal of Applied Polymer Science. Vol. 104(2007), pp.2468-2477.

DOI: 10.1002/app.25358

[3] M. A. Eddings and B. k. Gale: A PDMS-based gas pea-ton pumps for on-chip fluid handling in microfluidic devices. Journal of Micromechanics and Micro- engineering. Vol. 16(2006), pp.2396-2402.

DOI: 10.1088/0960-1317/16/11/021

[4] H. Q. Jiang, Z. Q. Song, S. B. Shang, et al. Preparation and properties of castor oil-modified waterborne polyurethane emulsion. Chemical Industry and Engineering Progress. Vol. 29(2010), pp.285-287.

[5] C. Wang, Y.S. Wu and L.L. Wu: Study on Synthesis and Properties of MDI Based Aqueous Polyurethane Dispersion. Paint & Coatings Industry, Vol. 39 (2009), pp.4-8.

[6] H. Du, N. Yin and Y. H. Zhao, et al.: Preparation and characterization of polyurethane elastomer based on castor oil-polyether polyol. New Chemical Materials, Vol. 37 (2009), pp.106-108.