Microstructure and Compound Developed from Ce-As-Fe System at High Temperature

Sheng Tao Dou; Jin Zhu Zhang; Jun Huang

doi:10.4028/www.scientific.net/AMR.460.103

Paper Titles

Zirconate Conversion Coatings on Al Alloy by Electrochemical Method
p.86

Corrosion Resistance of KH-550 and KH-567 Composite Silane Films on Cast Aluminum Alloy
p.90

Initial Exploitation of Corrosion Resistance and Adhesion of 10 Kinds of Silane on A3 Steel
p.94

Steering Control of an Autonomous Vehicle Based on RBF Neural Networks Compensation and Dynamic Systems
p.98

Microstructure and Compound Developed from Ce-As-Fe System at High Temperature
p.103

Prediction of the Effective Elastic Moduli of the Nanoparticle-Reinforced Polymer Matrix Composites Considering Interface Effects
p.107

Nonlinear Dynamic Buckling of FGM Shallow Conical Shells under Triangular Pulse Impact Loads
p.119

Fault Diagnosis Analysis of Rotor System Based on RBF Neural Network and Dynamic Systems
p.127

Preparation and Photocatalytic Preoperty of BaV₂O₆ Photocatalyst by Liquid-Phase Deposition Method
p.131

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 460Microstructure and Compound Developed from...

Microstructure and Compound Developed from Ce-As-Fe System at High Temperature

Abstract:

The interaction among Cerium, Arsenic and Iron at high temperature in a pressure-tight reactor were studied by means of electron probe microanalysis, optical microscopy and X-ray diffraction to understand what compounds could be developed and how about their stability chemically should be. The result shows that the binary compound CeAs is the main product on condition that the atomic ratio of Cerium to Arsenic is 2:1. There are some Fe2Ce, Ce4As3 and Fe17Ce2 compounds developed meanwhile. The amount of Fe17Ce2 phase by the base of steel increased with time prolonging at high temperature

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 460)

Pages:

103-106

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.460.103

Citation:

Cite this paper

Online since:

February 2012

Authors:

Sheng Tao Dou, Jin Zhu Zhang, Jun Huang

Keywords:

Arsenic, Cerium, Compound

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Guorui Zhi, Jihong Liu, Hongyan Ma, Yanli Wang, Xiaofeng Shi: Chinese Journal of Spectroscopy Laboratory Vol. 19(2002), pp.485-487 (In Chinese).

Google Scholar

[2] Shouping Liu and Shanchang Sun: Special Steel Vol. 22(2001), pp.12-15 (In Chinese).

Google Scholar

[3] Jun Ni: Modern Metallurgy, Vol. 37(2009, pp.30-32 (In Chinese).

Google Scholar

[4] Zan Feng and Jiguang Xiao: Heat Treatment of Metals Vol. 34(2009), pp.14-17 (In Chinese).

Google Scholar

[5] Chunlong Li: Chinese Rare Earths Vol. 22(2001), pp.1-6 (In Chinese).

Google Scholar

[6] K.A. Gschneidner, Jr. and F.W. Calderwood: Bulletin of Alloy Phase Diagrams Vol. 7(1986), pp.276-277.

Google Scholar

[7] S. ONO, J. G. Despault: Journal of the Less-Common Metals Vol. 22(1970): 51~59.

Google Scholar

[8] V. Babizhets'ky, C. Le Sénéchal, J. Bauer: Journal of Alloys and Compounds Vol. 287(1999), p.174–180.

Google Scholar

[9] Riccardo Ferro, Gabriella Borzone, Nadia Parodi: Journal of Alloys and Compounds Vol. 321(2001), p.248–260.

Google Scholar

[10] Daizhong Li, Shuqin Gao and Liehuo Zhang: Journal of the Chinese Rare Earth Society Vol. 3(1985), pp.71-72 (In Chinese).

Google Scholar

[11] W. F. Gale and T. C. Totemeir: Smithells Metals Reference Book (Butterworth-Heinemann, USA 2004).

Google Scholar