Initial Exploitation of Corrosion Resistance and Adhesion of 10 Kinds of Silane on A3 Steel

Qi Zhou; Guang Xia Sun; Bo Hu; Ping Zhao

doi:10.4028/www.scientific.net/AMR.460.94

Paper Titles

MnO Powder as Anode Material for Lithium Ion Battery
p.78

Application Research of Reverse Engineering in the Bionic Structure Design
p.82

Zirconate Conversion Coatings on Al Alloy by Electrochemical Method
p.86

Corrosion Resistance of KH-550 and KH-567 Composite Silane Films on Cast Aluminum Alloy
p.90

Initial Exploitation of Corrosion Resistance and Adhesion of 10 Kinds of Silane on A3 Steel
p.94

Steering Control of an Autonomous Vehicle Based on RBF Neural Networks Compensation and Dynamic Systems
p.98

Microstructure and Compound Developed from Ce-As-Fe System at High Temperature
p.103

Prediction of the Effective Elastic Moduli of the Nanoparticle-Reinforced Polymer Matrix Composites Considering Interface Effects
p.107

Nonlinear Dynamic Buckling of FGM Shallow Conical Shells under Triangular Pulse Impact Loads
p.119

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 460Initial Exploitation of Corrosion Resistance and...

Initial Exploitation of Corrosion Resistance and Adhesion of 10 Kinds of Silane on A3 Steel

Abstract:

Silane coupling agent is gradually concerns as a substitute for phosphate pre-treatment of painting. Ten kinds of silane solution such as the KH-450, KH-460, KH-470, KH-550, KH-560, KH-567, KH-578, 5501, 9810, BTSE were chosen as research objects in this paper. Corrosion resistance and adhesion of film were studied after silane treatment on A3 steel surface by copper sulfate drop test, alternate immersion in salt solution and adhesion experiments. These silane films were compared with uncoated A3 steel specimens. The results show that: silane treatment can improve the corrosion resistance of A3 steel in acid solution. KH-560, KH-5501 and KH-470 were ranked the top three in the corrosion resistance. KH-550, KH-560, KH-567 were fourth, fifth and sixth, respectively. Silane treatment can improve the corrosion resistance of A3 steel in neutral salt solution. KH-460, KH-560 and KH-567 have the best salt water corrosion resistance. KH-560 has better adhesion with paint film, following by KH-550 and KH460. When using ethanol and water as the hydrolysis solvent of silane, KH-450, KH-460, KH-470, KH-550, KH-560, KH-567, KH-578, 5501 have the better stability, but stability of 9810, BTSE are poor.