Modelling and Experimentation of Solid Lubrification with Powder MoS₂ through Self-Repairing and Self-Replenishing

Abstract:

Molybdenum disulphides (MoS2), which belong to the family of transition metal dichalcogenides, are well known for their solid lubricating behaviour. Thin films of MoS2 exhibit extremely low coefficient of friction in dry environments, and are typically applied by mixed in oil, grease or impregnated into porous matrix of powdered materials, sputter deposition, pulsed laser ablation, evaporation or chemical vapour deposition and, which are essentially either line-of-sight or high temperature processes. Solid lubricant coatings are attractive because they can reduce friction-generated heat. MoS2 is a common solid lubricant. However, the use of MoS2 can limited by excessive wear, as well as a friction coefficient. Several studies on solid lubricant coatings demonstrated success in lubricating dry sliding contacts over very long periods in tribometer tests or reciprocating sliding experiments.Several pellet-on-disk and pad-on-disk tribometer tests were conducted to study the lubrication characteristics of third-body particles of MoS2 powder. The tests consisted of simultaneous pellet-on-disk and pad-on-disk sliding contacts. Results from the tests show the self-repairing, self-replenishing, oil-free lubrication mechanism of MoS2. A theoretical control volume fractional coverage (CVFC) model was developed to predict: - (1) the friction coefficient at the pad-on-disk interface and - (2) the wear coefficient for the lubricated pellet-on-disk sliding contact. The fractional coverage varies with time and quantifies the amount of third-body film covering the disk asperities. Results from the model capture the tribological behaviour of the experimental sliding contacts reasonably well. The aim of this paper is modeling and experimentation of solid lubrification with MoS2 particles through self-repairing and self-replenishing and through the comparision between theoretical and experimental results obtained in the process of friction and wear by tribological tests.

• Periodical: Advanced Materials Research (Volumes 463-464)
• Pages: 1120-1124
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.463-464.1120
• Online since: February 2012
• Authors: Filip Ilie, Constantin Tita
• Keywords: CVFC Model, Powder Lubricants, Self-Repairing, Self-Replenishing, Third-Body Film, Tribological Behaviour

References

[1] H. Wo, K. Hu, X. G. Hu:, Tribological properties of MoS2 nanoparticles as additive in a machine oil, Tribology, Vol. 24, 2004, p.33 – 37.

[2] X. G. Hu, K. H. Hu, X. Z. Han: Morphology controlled synthesis of lubricative molybdenum disulfide ultrafined particles, Mat. Rev., Vol. 18(8A), 2004, pp.274-276.

[3] C.F. Higgs, H. vHeshmat: Characterization of pelletized MoS2 powder particle detachment process. Journal of Tribology – Transactions of the ASME, 2001. 123(3): pp.455-461.

DOI: 10.1115/1.1310158

[4] F. Ilie, C. Tita: Tribological properties of solid lubricant nanocomposite coatings obtained by magnetron sputtered of mos2/metal (ti, mo) nanoparticles, Proc. RAS, Seria A, Vol. 8, No. 3/2007, pp.207-211.

[5] F. Ilie, C. Tita: Tribological behavior of nanoparticles by molybdenum disulphide, International Conference DIPRE'09, Oct. 20-21, 2009 Galati, Romania, CD, p.13.

[6] N. Fillot, I. Iordanoff, Y. Berthier : Simulation of wear through mass balance in a dry contact. Journal of Tribology – Transactions of the ASME, 2005. 127(1): pp.230-237.

DOI: 10.1115/1.1828437

[7] P.L. Dickrell, W.G. Sawyer A. , Erdemir : Fractional coverage model for the adsorption and removal of gas species and application to superlow friction diamond-like carbon. Journal of Tribology – Transactions of the ASME, 2004. 126(3): pp.615-619.

DOI: 10.1115/1.1739408

[8] I.L. Singer, S.D. Dvorak, K.J. Wahl, T.W. Scharf: Role of third bodies in processes of friction and wear of protective coatings, J. Vac. Sci. Tech., A21 (5), S232-S240 (2003).

DOI: 10.1116/1.1599869

[9] I.L. Singer: How third-body processes affect friction and wear, MRS Bulletin, Vol. 23, no. 6, pp.37-40 (1998).

DOI: 10.1557/s088376940003061x

[10] E. Rabinowicz: Friction and Wear of Materials. 2nd edition, ed. I. John Wiley and Sons, 1995, New York.