Effects of V₂O₅ Addition on the Microstructure and Microwave Dielectric Properties of ZnNb₂O₆ Ceramics

Abstract:

ZnNb2O6 ceramics doped with V2O5 were prepared by conventional mixed solid method. The effects of V2O5 addition on the microstructure and the microwave dielectric properties of ZnNb2O6 ceramics were investigated systematically. The sintering temperature of ZnNb2O6 ceramics with 1.0wt.% V2O5 addition can be effectively reduced from 1150°C to 1050°C. The secondary phase ZnV2O6 was observed in sintered samples with V2O5 addition content higher than 1.0wt.%. For 0.3–3wt.%V2O5-doped ZnNb2O6 ceramics, The dielectric constants (εr) of densified samples were higher than that of undoped ZnNb2O6 ceramics. The temperature coefficient of resonant frequency (τf) were shifted toward zero direction with the increase of V2O5 addition, However, the dielectric loss (tanδ=1/Q) increased. The 1.0wt.% V2O5-doped ZnNb2O6 ceramics sintered at 1050°C for 3h have the optimum microwave dielectric properties: εr=28, tanδ=0.0006 and τf=-42.5 ppm/°C.

• Periodical: Advanced Materials Research (Volumes 476-478)
• Pages: 940-943
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.476-478.940
• Online since: February 2012
• Authors: Zhong Yan, Jin Liang Huang, Yong Jun Gu, Biao Jin, Ru Yu Wang
• Keywords: Dielectric Property, Sintering Temperature, V₂O₅, ZnNb₂O₆ Ceramics

References

[1] S.P. Wu and J.H. Luo: Alloy. Compd. 509(2011), p.8126

[2] R.C. Pullar, J.D. Breeze and N.M. Alford: Key Eng Mater. 224-226(2002), p.1

[3] Y.C. Zhang, L.T. Li, Z.X. Yue, et al: Materials Science and Engineering. 99(2003), p.282

[4] Y.C. Zhang, L.T. Li, Z.X. Yue, et al: Ceram Int. 29(2003), p.555

[5] H. Lee, K. Hong, S. Kim, et al: Mater Res Bull. 32(1997), p.847

[6] S.P. Wu, J. Ni, J.H. Luo, et al: Mater Chem Phys. 117(2009), p.307

[7] F. Gao, J. Liu, R. Hong, et al: Ceram Int. 35(2009), p.2687

[8] D. Kim, K.H. Ko and K.S. Hong: J. Am. Ceram. Soc. 84(2001), p.1286

[9] Y.J. Gu, J.L. Huang, Q. Li, et al: J. Eur. Ceram. Soc. 28(2008), p.3149