Effect of Substrate Conditions on Fe-Al2O3 Composite Coating

Singsarothai Saowanee; Vishnu Rachpech; Niyomwas Sutham

doi:10.4028/www.scientific.net/AMR.488-489.447

Paper Titles

Coating Life Assessment: The Use of Adhesion Strength in Parametric Development in Coating Degradation Evaluation
p.427

Effect of N₂ Flow Rate on Structure and Morphology of (Ti,Cr)N Thin Films Deposited by Unbalanced Magnetron Co-Sputtering
p.432

Thermal Oxidation of NiAl-Al₂O₃ Coated on Mild Carbon Steel
p.437

Optimization of Rare Earth Dope on MAl₂O₄ (M = Ba, Sr) by Self-Propagating High Temperature Synthesis
p.442

Effect of Substrate Conditions on Fe-Al₂O₃ Composite Coating
p.447

Compositional and Deposition Rate Dependence upon RF Substrate Bias of RF Sputtered Ni-Fe Films
p.452

Effect of Tool Wear on Tri-Phase CVD Coated Carbide Tools Life while Turning Al6061
p.457

Tool Wear Performance of TiAlN/AlCrN Multilayer Coated Carbide Tool in Machining of AISI D2 Hardened Steel
p.462

Effect of CaF₂ in Precursors on Steel Pipe Lined Fe-Al Intermetallic-TiB₂-Al₂O₃ Composite Coating by Centrifugal-SHS Process
p.468

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 488-489Effect of Substrate Conditions on Fe-Al2O3...

Effect of Substrate Conditions on Fe-Al₂O₃ Composite Coating

Abstract:

Steel substrate was coated by Fe-Al₂O₃ composite using self-propagating high-temperature synthesis (SHS) reaction of reactant coating paste. The green composite paste were prepared by mixing of Fe₂O₃, Al and polyvinyl alcohol solution. It coated on the steel substrate. The effect of sustrate conditions on the Fe-Al₂O₃ composite coating were studied. The SHS reaction of the coated green composite was ignited by oxy-acethylene flame. The reaction between precursors happen step by step along the coated green composite length, to form Fe-Al2O3 composite coating on the steel plate. The Fe-Al₂O₃ composite coating was characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) couple with dispersive X-ray (EDS)

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 488-489)

Pages:

447-451

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.488-489.447

Citation:

Cite this paper

Online since:

March 2012

Authors:

Singsarothai Saowanee, Vishnu Rachpech, Niyomwas Sutham

Keywords:

Flame Spray Coating, Self-Propagation High-Temperature Synthesis (SHS), Thermal Coating Process

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] V. Sitthichai, in: Thermal Spray Technology, Department of chemistry science, Faculty of science, Chiang Mai University, Thailand (2004).

Google Scholar

[2] N. Chaichana, N. Memongkol, J. Wannasin, J. and S. Niyomwas: CMU. J. Nat. Sci. Special Issue on Nano technology. Vol. 7(1), (2008), p.55.

Google Scholar

[3] S. Niyomwas: Journal of Metals Materials and Minerals Vol. 19(2), (2009), p.21.

Google Scholar

[4] S. Niyomwas: International Journal of Self-Propagating High-Temperature Synthesis Vol. 19(2), (2010), p.152.

Google Scholar

[6] N.A. Gokcen and R.G. Reddy: Thermodynamics, Plenum Press, New York, U.S.A. (1996).

Google Scholar

[7] S. Singsarothai, S. Niyomwas and V. Rachphech: Energy Procedia Vol. 9 (2011), p.398.

Google Scholar

[8] G. Ji, O. Elkedim and T. Grosdidier: Surface & Coatings Technology. Vol. 190, (2010), p.406.

Google Scholar

[9] Y. Dong, D. Yan, J. He, X. Li, W. Feng and H. Liu: Surface and Coatings Technology Vol. 179, (2004), p.223.

Google Scholar

[10] Z. Li, C. Liu, J. Huang, and S. Yin: J. Mater. Sci. Technol. Vol. 19(2), (2003), p.161.

Google Scholar