Study on the Technology of Resources Utilization of Oilfield Heavy Oil Sewage Sludge

Abstract:

The paper introduces the whole process ideas of pyrolysis and resources utilization of the heavy oil sewage sludge. Experiments of pyrolysis temperature optimization, the yields and composition analysis of pyrolysis products, the conditions optimization experiment of recycling aluminum salt from pyrolysis residue and the analysis of pyrolysis residue adsorptivity were carried out. These experiments shown that: when pyrolysis temperature was 600°C, oil content of pyrolysis residue could be controlled within 3.0‰, oil recovery rate could hit 10%, and C1-C3 hydrocarbons components of pyrolysis gas could reach 90%; gasoline, kerosene, diesel and other light components in pyrolysis oil could be amounted to 60%. When the following conditions were chosen: decarburization temperature of pyrolysis residue was 700-750°C, calcination time was 0.5-1h, acid dissolution time at normal temperature was 2-5h, concentration of HCl was 25-30%, molar ratio of Al and HCl was 1:1.0-1:1.2, aluminum dissolution rate could hit 90%, aluminum concentration of dissolved liquid could hit 10%. When pyrolysis final temperature was 600°C, residue with adsorption properties on the removal effect of COD and oil from oilfield oil sewage could be better than activated carbon.

• Periodical: Advanced Materials Research (Volumes 524-527)
• Pages: 1755-1762
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.524-527.1755
• Online since: May 2012
• Authors: Wan Fu Wang, Peng Liu, Li Duan, Jing Jing Wang
• Keywords: Heavy Oil Sewage Sludge, Pyrolysis, Resources Utilization

References

[1] Bing Li, Weihong Xie, Jingyi Zhu: Petroleum Planning&Engineering,Vol.20(4) (2009),pp.18-20,in Chinese.

[2] Yong Jiang, Chaocheng Zhao, Dongfeng Zhao:Environmental Protection of Oil & Gas Fields, Vol.15(4)( 2005),pp.38-41,in Chinese.

[3] Qin Du, Yi Chen: Environmental Protection of Oil & Gas Fields, Vol.11(2)(2001),pp.30-32,in Chinese.

[4] Ruliang Xu, Zizhong Zhou, Chunping Liu, Yonggang Huang:Environmental Protection of Chemical industry, Vol.23(6) (2003),pp.314-317,in Chinese.

[5] Mei rong Li, Xiangdong Sun, Cunguang Yuan:Journal of Prochemical Universities, Vol.19(2)( 2006),pp.30-33, in Chinese.

[6] Shuixiang Xie, Mian Chen, Guancheng Jiang, Zhiyong Li, Hao Deng, Rongsha Wang: Chinese Journal of Environmental Engineering,Vol. 5(6)( 2011),pp.1351-1356,in Chinese.

[7] Wanfu Wang, Hao Jin, feng Shi, Peng Liu, Jie Huang:Chemical Engineering of Oil & Gas, Vol.39(2)( 2010),pp.173-177,in Chinese.

[8] Shuang Chen, Huie Liu, Qingjie Guo:Petroleum Processing and Petrochemicals, Vol.38(7)( 2007),pp.50-53,in Chinese.

[9] Chao Chen, Shuiqing Li, Changtao Yue, Krutt schnitt T, Pruckner E, Qiang Yao:Journal of Chemical Industry and Engineering (China), Vol.57(3)(2006),pp.650-657,in Chinese.

[10] Tang Haoyuan, Jin Yuqi, Yan Jianhua: Power System Engineering, Vol. 24(4) (2008),pp.13-15, in Chinese.