Pre-Strained Piezoelectric PVDF Nanofiber Array Fabricated by Near-Field Electrospining on Cylindrical Process for Flexible Energy Conversion

Article Preview

Abstract:

In this study, near-field electrospining on hollow cylindrical (NFES) process was used to fabricate permanent piezoelectricity of polyvinylidene fluoride (PVDF) piezoelectric nanofibers. With in situ electric poling, mechanical stretching and heating during NFES process, the pre-strained piezoelectric PVDF nanofibers with high stretchability and energy conversion efficiency can be applied at low-frequency ambient vibration to convert mechanical energies into electrical signals. By adjusting rotating velocity of the hollow cylindrical glass tube on X-Y stage, electric field, baking temperature and carbon nanotube (CNT) concentration in PVDF solution, the crystalline of β phase, polarization intensity and morphology of piezoelectric fiber can be controlled. XRD (X-ray diffraction) observation of PVDF fibers was characterized. With electric field 0.5×107 V/m (needle-to-tube distance 2 mm and DC voltage 5 kV), rotating velocity 400 r.p.m, baking temperature 80 °C and 0.03 wt% CNT in NFES process, it reveals a high diffraction peak at 2θ=20.8° of piezoelectric crystal β-phase structure. Then the array nanofibers were transferred onto a parallel copper electrode by using flexible insulation epoxy/PI film to provide packaging protection. When the sensor was tested under 5 Hz vibration frequency, the maximum induced voltage was 29.4 mVp-p.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

462-465

Citation:

Online since:

September 2012

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2012 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] J.Q. Liu, H.B. Fang, Z.Y. Xu, X.H. Mao, X.C. Shen, D. Chen, H. Liao, B.C. Cai, A mems-based piezoelectric power generator array for vibration energy harvesting, Microelectron J. 39 (2008) 802–806.

DOI: 10.1016/j.mejo.2007.12.017

Google Scholar

[2] C.T. Pan, Z.H. Liu, Y.C. Chen, C.F. Liu, Design and fabrication of flexible piezo microgenerator by depositing ZnO thin films on PET substrates, Sensor Actuat A-Phys. 159 (2010) 96–104.

DOI: 10.1016/j.sna.2010.02.023

Google Scholar

[3] C.T. Pan, Z.H. Liu, Y.C. Chen, Study of broad bandwidth vibrational energy harvesting system with optimum thickness of PET substrate, Curr Appl Phys. (2011).

DOI: 10.1016/j.cap.2011.10.005

Google Scholar

[4] W.T. Chang, Y.C. Chen, R.C. Lin, C.C. Cheng, K.S. Kao, Y.C. Huang, B.R. Wu, Y.C. Huang, Design and fabrication of a piezoelectric transducer for wind-power generator, Thin Solid Films. 519 (2011) 4687–4693.

DOI: 10.1016/j.tsf.2011.01.015

Google Scholar

[5] W.T. Chang, Y.C. Chen, R.C. Lin, C.C. Cheng, K.S. Kao, Y.C. Huang, Wind power generators based on ZnO piezoelectric thin films on stainless steel substrates, Curr Appl Phys. 11 (2010) 333–S338.

DOI: 10.1016/j.cap.2010.11.007

Google Scholar

[6] D. Sun, C. Chang, S. Li, L.W. Lin, Near-field electrospinning, Nano Lett. 6 (2006) 839–842.

DOI: 10.1021/nl0602701

Google Scholar

[7] C. Chang, K. Limkrailassiri, L.W. Lin, Continuous near-field electrospinning for large area deposition of orderly nanofiber patterns, Appl Phys Lett. 93 (2008) 123111.

DOI: 10.1063/1.2975834

Google Scholar

[8] C. Chang, V.H. Tran, J. Wang, Y. Fuh, L.W. Lin, Direct-write piezoelectric polymeric nanogenerator with high energy conversion efficiency, Nano Lett. 10 (2010) 726–731.

DOI: 10.1021/nl9040719

Google Scholar

[9] C. Chang, Y.K. Fuh, and L.W. Lin, A direct-write piezoelectric PVDF nanogenerator, 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), Denver. (2009) 1485–1488.

DOI: 10.1109/sensor.2009.5285796

Google Scholar

[10] M. Neidhofer, F. Beaume, L. Ibos, A. Bernes and C. Lacabanne, Structural evolution of PVDF during storage or annealing, Polymer. 45 (2004) 1679–1688.

DOI: 10.1016/j.polymer.2003.12.066

Google Scholar

[11] Y. Qi, N.T. Jafferis, K. Lyons, C.M. Lee, H. Ahmad, M.C. McAlpine, Piezoelectric ribbons printed onto rubber for flexible energy conversion, Nano Lett. 10 (2010) 524–528.

DOI: 10.1021/nl903377u

Google Scholar

[12] J. Pu, X.J. Yan, Y.D. Jiang, C. Chang, L.W. Lin, Piezoelectric actuation of a direct write electrospun pvdf fiber, 23rd International Conference on Micro Electro Mechanical Systems (MEMS), Wanchai, Hong Kong, 24–28 Jan., (2010).

DOI: 10.1109/memsys.2010.5442418

Google Scholar

[13] X. Chen, S.Y. Xu, N. Yao, 1. 6 V nanogenerator for mechanical energy harvesting using pzt nanofibers, Nano Lett. 10 (2010) 2133–2137.

DOI: 10.1021/nl100812k

Google Scholar