Optimization Electro Discharge Machining of Ti-6Al-4V Alloy with Silicon Carbide Powder Mixed

Saboktakin Rizi Mohsen; Gholam Reza Razavi; Mojtaba Ostadmohamadi; Ali Reza Havaie

doi:10.4028/www.scientific.net/AMR.566.466

Paper Titles

Investigation into Different Tool Coating performance While Turning Al6061
p.443

Research on Internet of Things Technology in Railway Signal Device Management
p.448

Gripping Stability to Assess Aesthetical Shape: A PET Bottle Case Study
p.454

Pre-Strained Piezoelectric PVDF Nanofiber Array Fabricated by Near-Field Electrospining on Cylindrical Process for Flexible Energy Conversion
p.462

Optimization Electro Discharge Machining of Ti-6Al-4V Alloy with Silicon Carbide Powder Mixed
p.466

Forming Complicated Surface in Shipyard Using Neural Network System
p.470

Accurate Measurement of CTE of Aluminum Alloy 7050-T7451 and the Impact on Thermal Deformation Analysis
p.476

Design of Railway Journal Box Embedded with FBG Sensor to Monitor Temperature and Acoustic Emission Signal
p.480

Design of Distributed Brillouin Scattering Sensor System for Structural Health Monitoring
p.484

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 566Optimization Electro Discharge Machining of...

Optimization Electro Discharge Machining of Ti-6Al-4V Alloy with Silicon Carbide Powder Mixed

Abstract:

The Ti-6Al-4V alloy is the most important and widely used titanium alloy which enjoys the welding, forging and machining capabilities. However brittle at high temperatures and low thermal conductivity caused restrictions to deformation and machining of this alloy. So advanced methods machining such as Electrical discharge machining has been developed for titanium and its alloys. One of the ways to improve the performance of electrical discharge machining method is to add the powder to the dielectric. Depending on the type of powder used the different results are achieved. In this study the effect of silicon carbide powder on electrical discharge machining of titanium alloys has been studied. Results suggest that the addition of silicon carbide powder in an electric discharge machining method reduces the roughness and rate filings will be taken. The experimental results showed that the addition of silicon carbide powder will have a positive effect on reducing corrosion of the electrode.

You might also be interested in these eBooks

Machine Design and Manufacturing Engineering

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 566)

Pages:

466-469

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.566.466

Citation:

Cite this paper

Online since:

September 2012

Authors:

Saboktakin Rizi Mohsen, Gholam Reza Razavi, Mojtaba Ostadmohamadi, Ali Reza Havaie

Keywords:

EDM, Electro Discharge Machining, Silicon Carbide Powder, Titanium

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] M. Esmailian, M. Mehrvar, Investigation of the effect of AL2O3 powder in Electro Discharge Machining for Titanium alloys, ICME, vol. 9, (2007), pp.549-557.

Google Scholar

[2] A. Haskalik, Electrical discharge machining of titanium alloy (Ti–6Al–4V), Applied Surface Science, vol. 253, (2007), pp.9007-9016.

DOI: 10.1016/j.apsusc.2007.05.031

Google Scholar

[3] S. Kuriakose, M.S. Shunmugam, Characteristics of wire-electro discharge machined Ti6Al4V surface, Materials Letters, vol. 58, (2004), p.2231– 2237.

DOI: 10.1016/j.matlet.2004.01.037

Google Scholar

[4] A. Mohammad Yeakub, A. NurAtiqah, Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness, "Advanced Materials Research, vol. 341, (2012), pp.142-146.

DOI: 10.4028/www.scientific.net/amr.341-342.142

Google Scholar

[5] B. Mohan, A. Rajadurai, Effect of Sic and rotation of electrode on electrical discharge machining of Al-SiC composite, Material processing technology, vol. 124, (2002), pp.297-304.

DOI: 10.1016/s0924-0136(02)00202-9

Google Scholar