High Temperature Deformation Behavior and Corrosion Resistance of 2205 Duplex Stainless Steel under Strain Rate of 0.5s-1

Yin Hui Yang; Shao Hong Li

doi:10.4028/www.scientific.net/AMR.581-582.1054

Paper Titles

Finite Element Simulation of Nickel-Plated Steel Sheet in Stamping Process
p.1036

Flowing Liquid Metal Corrosion of Structural Steels in the Pb-Bi Eutectic
p.1040

Fluoride Evaporation during Thermal Treatment of Waste Slag from Mg Production Using Pidgeon Process
p.1044

Germanium Co-Precipitation with Ferric Hydroxide: A Lab-Scale Study
p.1050

High Temperature Deformation Behavior and Corrosion Resistance of 2205 Duplex Stainless Steel under Strain Rate of 0.5s^-1
p.1054

Influence of pH on the Electrochemical Bahavior of 00Cr15Ni7Mo2Cu2 Supermartensitic Stainless Steel in 3.5% NaCl Solutions
p.1058

Non-Metallic Inclusions Control for High Strength Anti-HIC X65 Tube Steel
p.1062

Research on Hydrometallurgical Purification of Microimpurity in SiGe Alloy Tailings
p.1068

Research on Technology of Reducing Iron and Steel Consumption in Whole Process of Steelmaking
p.1072

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 581-582High Temperature Deformation Behavior and...

High Temperature Deformation Behavior and Corrosion Resistance of 2205 Duplex Stainless Steel under Strain Rate of 0.5s^-1

Abstract:

Under strain rate of 0.5s-1, the effect of deformation temperature on flow stress, microstructure and corrosion resistance of 2205 duplex stainless steel (DSS) was investigated. The dynamic recrystallization (DRX) of austenite phase was enhanced with the deformation temperature increasing from 850°C to 1050°C, meanwhile, the leading deformation mechanism changed from work hardening to DRX. When the deformation temperature was further increased to 1250°C, the dynamic recovery (DRV) of ferrite phase played a leading role. The specimen after deformation at 1050°C exhibited better DRX behavior, which leads to more γ/γ grain boundaries and δ/γ boundaries formation, increasing the occurrence of pitting corrosion, and it presented best corrosion resistance at 950°C.