Microstructure and Tribological Properties of Self-Lubricating Graphite/Ni60 Composite Coatings Prepared by Laser Cladding

Jiao Xi Yang; Zhi Cheng Wang; Xuan He Miao; Xi Bing Wang

doi:10.4028/www.scientific.net/AMR.583.27

Paper Titles

Research on Synthesis and Performance of Solvent-Free Aluminum-Plastic Composite Polyurethane Adhesive
p.9

Synthesis of Attapulgite Fiber-Aerogel Composite and its Oil Absorption Capacity under Low Temperature
p.14

Synthesis of AlN Nanowires and Characterization with Properties of Composite Materials
p.18

Mechanical Properties of Functionalized Carbon Nanotube as Reinforcements
p.22

Microstructure and Tribological Properties of Self-Lubricating Graphite/Ni60 Composite Coatings Prepared by Laser Cladding
p.27

Processing and Mechanical Properties of Starch and PVA Composite Reinforced by MCC
p.32

The Electrical Resistivity of B₄C Modified Phenol-Formaldehyde Resin Matrix Composite Materials Pyrolyzed at Different Temperatures
p.36

Packaging Properties of Composite Film Made up of Polylactic Acid (PLA) and Triacetin
p.40

Preparation and Treatment for Oral Ulcer of Quercetin and the Drug-Loaded Chitosan Composite Material
p.44

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 583Microstructure and Tribological Properties of...

Microstructure and Tribological Properties of Self-Lubricating Graphite/Ni60 Composite Coatings Prepared by Laser Cladding

Abstract:

Ni60 superhard alloy with the additions of graphite solid lubricants was successfully prepared on 45 carbon steel substrate by means of laser cladding. The quality of coating was relatively high and had metallurgical bonding with the substrate. The morphology of laser cladding layer was observed by SEM, composition analysis was applied by EDS. Elevated temperature frictional behaviors of graphite/Ni60 composites coatings were investigated on MMG-10 wear machine. The results showed that the friction coefficient of graphite/Ni60 composite coating was obviously decreased from 0.55 to 0.20 with increasing temperature. The wear mechanism transformed from adhesion to oxidation with the increase of temperature. The graphite/Ni60 composite coating material showed the optimum self-lubricating property at 500°C.