Forging Effect of Horizontal V - Shaped Anvil for Heavy Axial Forgings

Yong Jun Zhang; Zhu Bai Liu; Jing Tao Han

doi:10.4028/www.scientific.net/AMR.652-654.1948

Paper Titles

Simulation of Microstructure Evolution on Copper, Aluminum and Alloy during ECAP
p.1927

Comparative Study on Compression Deformation Behaviors of Cast and Extruded AZ31 Alloys
p.1932

Dynamic Strain Aging during Tensile Deformation of Extruded AZ81 Magnesium Alloy
p.1937

Die Wear Analysis of Spur-Gear Shaft Hot Extrusion Process
p.1942

Forging Effect of Horizontal V - Shaped Anvil for Heavy Axial Forgings
p.1948

Influence of Temperature Difference on Front End Bending in Hot Slab Rolling
p.1952

Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube
p.1956

FEM Analysis of Glass Lens Molding Press
p.1961

Research on Finite Element Simulation and Test of Two-Pass Deep Drawing Forming for Conical Parts
p.1966

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 652-654Forging Effect of Horizontal V - Shaped Anvil for...

Forging Effect of Horizontal V - Shaped Anvil for Heavy Axial Forgings

Abstract:

Horizontal V – shaped anvil forging method is introduced to control fibrous tissue flow direction through changing shape of anvil, to improve the anisotropy of mechanical properties of forgings. This method can provide effectively drawing out technology for heavy axial forgings with requirements on the transverse mechanical properties. In this paper pilot production for rectangular billet by the forging method with horizontal V - shaped anvil were carried out. The results show that the forging method with horizontal V-shape anvil can improve transverse mechanical properties, realize uniform forging for heavy axial forgings, the ratio between transverse and longitudinal mechanical property is about 1.0 in the same position for heavy axial forgings, and uniformity degree of mechanical properties is better.

You might also be interested in these eBooks

Advances in Materials and Materials Processing

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 652-654)

Pages:

1948-1951

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.652-654.1948

Citation:

Cite this paper

Online since:

January 2013

Authors:

Yong Jun Zhang, Zhu Bai Liu, Jing Tao Han

Keywords:

Anisotropy, Heavy Axial Forgings, Horizontal V-Shape Anvil, Mechanical Property

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Liu Z B, Ni L Y, Liu G H. New Theory and technology of deformation for heavy forging [M]. Beijing: China Machine Press, (2009)

Google Scholar

[2] Liu Zhubai, Ni Liyong,Shan Rui, et al. Retrospect & Prospect on New Theory and New Process and Key Technology of Deformation of Heavy Forgings:Commemoration of the 100th Heavy Casting and Forging[J]. Heavy Casting and Forging, (2003),p.48

Google Scholar

[3] Lv Y. Forming Theory and Technique of Forging. Beijing(1991),in China Machine Press.

Google Scholar

[4] Liu Z B, Zhang Y J, Liu G H, et al. New Forging Method of Horizontal V-shape Anvils: Chinese Patent, ZL 97101491. 4. (1998)

Google Scholar

[5] Liu Z B. New Plastic Forming Technologies and Their Mechanical Principle. Beijing(1995),in China Machine Press.

Google Scholar

[6] Zhang Y J. New Forging Method of Improving Transverse Mechanical Properties for Heavy Axial Forgings. Qinhuangdao(1997),in Yanshan University.

Google Scholar