Analysis of Coupled Bending-Axial Vibration of a Rotor

Abstract:

Aiming at a rotor model, the coupled bending-axial vibration is being analyzed.Calculation results show that the prestress relative to rotational centrifugal load may influence bending vibration frequencies of a rotor.The bending vibration frequencies will increase when the prestress increases.The axial vibration frequency has not an influence because the direction of the spinning prestress is perpendicular to axis.When a rotor is applies axial force, a compressional force will tend to increase the axial vibration frequencies while a tensile force will decrease the axial vibration frequencies.The effects of the prestress(centrifugal load )of the spinning rotor and the axial prestress can be accounted by an adjustment of the stiffness matrix for analysis.By use of the stiffness matrix,the changed axial and bending vibration frequencies can be explained.The coupled bending-axial vibration may take place when the bending vibration frequencies have increased in the state of the changed prestress.In the end, the coupled bending-axial vibration frequency can be calculated.On the basis of prestress, the coupled lateral-torsional vibration and the coupled torsional-axial vibration frequency can be analysed,similarly.

• Periodical: Advanced Materials Research (Volume 662)
• Pages: 608-611
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.662.608
• Online since: February 2013
• Authors: Jian Feng Ye, Chun Long Zheng, Xue Shi Yao
• Keywords: Axial Vibration, Bending Vibration, Coupled Bending-Axial Vibration, Pre-Stress

References

[1] Qiang Yan, Xie Yonghui, Zhang Di. Review and Prospect for Coupled Lateral and Torsional Vibration of Turbogenerator Unit Shafting. Turbine Technology. Vol. 48 No. 5 (2006),P. 107-110(in Chinese).

[2] Li Huiguang, Sun Qiguo. Analysis of coupled torsional-axial vibration of crankshaft. Journal of Lanzhou Jiaotong University(Natural Sciences). Vol. 23 No. 1(2004),P. 321-326(in Chinese).

[3] Tondl A. Some Problems of Rotor Dynamics{M}. Chapman and Hall, London, (1965).

[4] Song Tianxiang, Wang Yi, Song Xigeng, Li Bozhong. Analysis of characteristic of axial vibration in low-speed long-stroke marine engine. Journal of Dalian University of Technology. Vol. 35 No. 3 (1995), P. 367-370(in Chinese).

[5] Yan Jin, Wu Zhenbao. Analysis of the Axial Vibration Eigen Frequences for the Mill Main Transmission System. Metallurgical Equipment. Total No. 107(1998),P. 29-31(in Chinese).

[6] YAO Xue-shi, LIU Rong-wan. The Study of the Non-balance Response Based on Prestress Meyhod[J]. Journal of Vibration and Shock. Vol. 24. No. 3(2005),P. 84-86. (in Chinese).

[7] YAO Xue-shi, LIU Rong-wan. The Study of the Torsion Vibration Based on Prestress Meyhod[J]. Turbine Technology. Vol. 45. No. 6(2003),P. 375-376. (in Chinese).