Effects of Electrolyte Parameters on Properties of Ceramic Coatings Formed on Aluminum Alloy 7075 by Plasma Electrolytic Oxidation

Jing Guo Miao; Run Wu; Qiu Rong Chen; Kang Da Hao; Zhong Ling Wei

doi:10.4028/www.scientific.net/AMR.668.875

Paper Titles

Experimental Study on Heat Transfer Boundary Conditions for Steel Hot Extrusion Process
p.856

Dynamic Strain Aging in the Fe-Mn-Cu-C TWIP Steels
p.861

The Formation Mechanism of Equiaxed Crystals in Pure Aluminum Solidification Structure under the Al-Ti-C Master Alloy
p.865

Segregation Patterns and the Phase-Field 3D-Model for Adiabatic Phase Transition in Al-Cu Alloys
p.870

Effects of Electrolyte Parameters on Properties of Ceramic Coatings Formed on Aluminum Alloy 7075 by Plasma Electrolytic Oxidation
p.875

Effects of Surface Oxide Coating on Corrosion Behavior of Ti-1023/LY12 Galvanic Couple
p.880

Investigation of Microstructure and Properties of an Al-Zn-Mg-Cu Alloy
p.885

Influence of Welding Sequence on Residual Stress and Distortion in Rectangular Welding of 6061 Aluminum Alloy
p.890

Orthogonal Experimental Study on the Grinding-Hardened Layer’s Depth and its Uniformity of 45 Steel
p.898

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 668Effects of Electrolyte Parameters on Properties of...

Effects of Electrolyte Parameters on Properties of Ceramic Coatings Formed on Aluminum Alloy 7075 by Plasma Electrolytic Oxidation

Abstract:

Four electrolyte (aluminate, silicate, borate and phosphate) solutions were optimized for using in surface treatment of 7075 aluminum alloy by plasma electrolytic oxidation. Microstructure, phase composition and corrosion resistance of ceramic coatings on the surface were analyzed by SEM, X-ray diffraction as well as electrochemical work station. It was showed that ceramic coatings prepared in aluminate solution had excellent continuity, compact structure with micro hardness of HV0.1 1100. The major portion of all coatings consisted of γ-Al2O3 and bits of α-Al2O3, the corrosion potential was increased by a small extent while the corrosion current density was significantly reduced.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 668)

Pages:

875-879

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.668.875

Citation:

Cite this paper

Online since:

March 2013

Authors:

Jing Guo Miao, Run Wu, Qiu Rong Chen, Kang Da Hao, Zhong Ling Wei

Keywords:

Ceramic Coating, Electrolyte Systems, Plasma Electrolytic Oxidation

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] A. L. Yerokhin, A. A. Voevodin, V. V. Lyubimov, et al. Plasma electrolytic fabrication of oxide ceramic surface layers for tribotechnical purposes on aluminum alloys[J]. Surface & Coatings Technology, 1998, 110: 140-146.

DOI: 10.1016/s0257-8972(98)00694-x

Google Scholar

[2] Yong-Jun Oh, Jung-Il Mun, Jung-Hwan Kim. Effects of alloying elements on microstructure and protective properties of Al2O3 coatings formed on aluminum alloy substrates by plasma electrolysis[J]. Surface & Coatings Technology, 2009, 204: 141-148.

DOI: 10.1016/j.surfcoat.2009.07.002

Google Scholar

[3] K. Tillous, T. Toll-Duchanoy, E. Bauer-Grosse, et al. Micro-structure and Phase Composition of Microarc Oxidation Surface Layers Formed on Aluminum and Its Alloys 2214-T6 and 7050-T74[J]. Surface & Coatings Technology, 2009, 203: 2969-2973.

DOI: 10.1016/j.surfcoat.2009.03.021

Google Scholar

[4] Wenbin Xue, Chao Wang, Hua Tian, et al. Corrosion behaviors and galvanic studies of microarc oxidation films on Al-Zn-Mg-Cu alloy[J]. Surface & Coatings Technology, 2007, 201: 8695-8701.

DOI: 10.1016/j.surfcoat.2006.10.029

Google Scholar

[5] E. Matykina, R. Arrabal, P. skeldon, et al. AC PEO of aluminum with porous alumina precursor films[J]. Surface & Coatings Technology, 2010, 205: 1668-1678.

DOI: 10.1016/j.surfcoat.2010.05.014

Google Scholar