Advanced Materials Research Vols. 694-697

Abstract: Multi-core processor technology is getting more and more common for both business and private use. However, the operating systems and applications are not keeping the same pace with multi-core hardware. In the mean while, to get better performance, more factors need to be considered under multi-core platform, e.g. load balance, cache, task relationship, etc. This paper focuses on making full use of multi-core processor through scheduling the tasks to proper core with CPU priority Algorithm which calculates a priority of each core when scheduling a task. With CPU Priority, it is easier to take interesting factors into account and combine several factors together. We did our work based on a scheduler simulator implemented with Python and we observed that, with CPU priority scheduling algorithm, it does suggest a flexible way to schedule the CPU assignment and is able to gain some satisfactory improvement on the response performance according to our simulation.

Abstract: The key point researched by many scholars in the field of surveying and mapping is how to use the given geodetic height H measured by GPS to obtain the normal height. Although many commonly-used fitting methods have solved many problems, they all value the pending parameters as the nonrandom variables. Figuring out the best valuations, according to the traditional least square principle, only considers its trend or randomness, which is theoretically incomprehensive and have limitations in practice. Therefore, a method is needed not only considers its trend but also takes randomness into account. This method is called the least squares collocation.

Abstract: An improved algorithm for joint direction of departure (DOD) and direction of arrival (DOA) estimation in bistatic MIMO radar based on fourth order cumulants is presented. Firstly, the data of receiver is reset and divided to acquire the rotational invariance property of transmitter and receiver, respectively. The fourth order cumulants matrixes in twain are constructed which are based on the basic definition of the cumulant. Then we use the propagator method (PM), which only requires linear operation but does not involve any eigendecomposition of the cumulant matrix, to estimate the DODs and DOAs, respectively. Finally, the maximum likelihood method is used to solve the pairing problem. The proposed method is effective in prohibiting the Gaussian colored noise and improves the performance of the angle estimation slightly. It does not need two-dimensional spectrum peak searching and eigenvalue decomposition on the cumulant matrix, thus the computation complexity is reduced. At the same time, it has no exceptive claim on the number of receive arrays or receive arrays. Simulation results verify the effectiveness and feasibility of the proposed method.

Abstract: The significance of this thesis is that the function of call simulation is designed to satisfy the operator’s needs. Operators can diagnose whether the telephony applications proceed normally by manipulating the VOIP(Vocie Over IP) telephony terminals on ITMS(Integrated Terminal Management System) platform remotely, by which way, it can help operators to save large manual and material resources. And this thesis focuses on how to realize the function of call simulation on VOIP phone terminals. It firstly studies the related modules in the process of call simulation and the procedures of each modules cooperated, from a macro point of view. And then it focuses on elaborating the scheme of designing call simulation, including the design of simulation applications for call and called sides and design of simulation signal process in the situation of normal calling. In the testing step, it turns on to validate and realize the goal of manipulating and diagnosing the telephony applications by packeting the communication’s terminal , analyzing signaling streams, etc,.

Abstract: In information theory (IT), it is an open problem for thirty years to establish an entire capacity bound of two-user Gaussian weak interference network. Under the assumption that channel situation information (CSI) is known at transmitter, we analyze the effects of three methods of transmitter preprocessing on performance of weak interference MIMO channels. Due to treat weak interference as noise, the bounds on the capacity region of two-user Gaussian weak interference channels (ICs) with the three transmitter preprocessing methods are derived. Compared with the performance without transmitter preprocessing, the sum rate in our system is larger. Finally the simulation results are proposed to be consistent with the theorem.

Abstract: Previous work on quasi-orthogonal space-time block code (QO-STBC) has been designed to achieve full rate and full diversity gain for four antennas. However this conventional QO-STBC scheme decoding is complex. For achieving more diversity gains, an extended QO-STBC scheme is provided to achieve full diversity with one rate for six antennas. Furthermore, by transforming the detection matrix to an orthogonal one, this novel scheme can achieve a simple linear decoding. Therefore it proposes an extended minimum decoding complexity QO-STBC (MDC-QO-STBC) for six antennas. Due to eliminate the interference from different equivalent channels, the novel extended MDC-QO-STBC scheme improves transmission reliability and linear decoding complex compared with the conventional QO-STBC scheme. At last extensive simulation results are presented to prove the theoretical analysis.

Abstract: In view of the requirements on multi-target information interaction and implementing complicated control strategies among different ECUs in hybrid electric trucks, an information integration control network based on CAN bus is proposed. A HCS12 dual-core processor MC9S12XDG128 is adopted to design an information integration module for sensor signal acquisition and data transmission in the network. Application layer protocol is defined to optimize the message transmission mechanism. Meanwhile, Rate Monotonic Analysis (RMA) method is adopted to analyze bus load rate and real-time performance of the network. Bench test results have shown that the designed information integration control network for hybrid electric trucks owns good real-time performance and is reliable to implement communication and control tasks with low bus load rate.

Abstract: IEC 61850 is an international standard developed by the International Electrotechnical Commission TC57 substation automation communication networks and systems. It uses MMS (Manufacturing Message Specification) as a real-time communication protocol of the application layer, and achieves the communication between the substation layer and the spacer layer. This paper describes the features and functions of the IEC 61850 and MMS technology and focuses on the principle of MMS mapping in the application of IEC 61850 , then preliminarily leads to the overall design framework of the IEC 61850 gateway.

Abstract: Knowledge integration played a major and centre role in the process of organizations knowledge innovation. Study on the knowledge integration contents and process in organization has important significance. There are four contents of knowledge integration in organization knowledge innovation: knowledge integration between different knowledge main bodies; different knowledge levels; the new and original knowledge system; personal study, team study and organization study. The paper discussed the process of knowledge integration toward organization knowledge innovation based on lify-cycle theory and divided the process into four stages: embryonic stage, development stage, mature stage and diffusion stage. The paper analyzed the knowledge value in different life cycle stages and the result indicates that the knowledge in mature stage is the most valuable.

Abstract: The vulnerability of the global navigation satellite systems (GNSS) makes it susceptible to a variety of threats, so it is significant to study the effects of each threat on GNSS performance. To analyze the impacts of different threats, a dynamic master logic diagram (DMLD) based modeling and analysis method was presented. First the relationships between threats and GNSS performance were built through a quadric associations by DMLD symbols, then qualitative and quantitative analysis was done via DMLDs great reasoning power, at last qualitative and quantitative analysis could show engineers and researchers the effects they concerned about and also could support the improvement of GNSSs defense and protection capability. The DMLD based method provides engineers a feasible way for threats modeling and analysis.