Development of Shearer Picks Brazed by Copper Brazing Agent and Property Study on Brazing

Ning Zhang; Jin Guo Ge; Li Yang; Min He

doi:10.4028/www.scientific.net/AMR.791-793.710

Paper Titles

Research on Control Strategy of Automatic Control System for Sewage Treatment
p.690

The Design and Finite Element Analysis of the Installation to Smash Banana Stem
p.694

Comparative Research on Damping Effects of Shock Absorders Relatively Made in Russian and China on the Fuel-Lubricating Oil Heat Exchanger of Aeroengine
p.699

Application of Backstepping Stability Control in the Diffusion Process
p.704

Development of Shearer Picks Brazed by Copper Brazing Agent and Property Study on Brazing
p.710

Centrifugal Pump Volute Parametric Design Based on SolidWorks
p.714

Finite Element Analysis on Rack and Pinion of Roadheader
p.718

Optimization Calculation and Simulation Analysis of Mine Hydraulic Grilled Slag Machine Cantilever
p.722

The Optimization Design of Hydraulic Support: Rolling Advancing Support Device of Hydraulic Support
p.726

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 791-793Development of Shearer Picks Brazed by Copper...

Development of Shearer Picks Brazed by Copper Brazing Agent and Property Study on Brazing

Abstract:

As wearing parts, shearer picks, in which the huge consumption and inefficient are caused by the poor quality of brazing, are widely used in the mining process. In this paper, the cemented carbide YG15, 42CrMo steel and HL105 copper brazing film were used as the head, body and solder, respectively, and the furnace brazing was used for shearer picks where the home-made water-soluble copper brazing agent was fabricated instead of the traditional dehydrated borax. The results show that the strength of the welded joint improves greatly and is up to a superior level. When the copper brazing agent and water in a four-to-six ratio, the solder is completely wetted, the best bending resistance of the head is obtained, the brazing seam of picks which are superior to the factory production is brimming, and thus the service life is significantly improved.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 791-793)

Pages:

710-713

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.791-793.710

Citation:

Cite this paper

Online since:

September 2013

Authors:

Ning Zhang, Jin Guo Ge, Li Yang, Min He

Keywords:

Copper Brazing Agent, Furnace Brazing, Shearer Picks

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] WANG Yao-wen, CHEN Qiang, SUN Zhen-guo, et a1. Relationship between sound sigal and weld status in Plasma alewelding[J], Trans. Nonferrous Met. Soe. China, 2001, 11(1): 54-57.

Google Scholar

[2] L.X. Cai, C.M. Wang, H.M. Wang. Laser cladding for wear-resistant Cr-alloyed Ni2Si-NiSi intermetallie composite coatings[J], Materials Letters, 2003, (57): 2914-2918.

DOI: 10.1016/s0167-577x(02)01396-4

Google Scholar

[3] L. Sexton, S．Lavin, G. Byme, A. Kennedy. Laser cladding of aerospac materials[J], Journal of Materials Processing Technology, 2002, (122): 63-68.

Google Scholar

[4] Md. Aminul Islam, Md. Mohar Ali Bepari, KaziMd. Shorowordi. Dry sliding wear in case-hardened niobium microalloyed steels. Journal ofMaterials Processing Technology[J], 2005, 160: 401-409.

DOI: 10.1016/j.jmatprotec.2004.04.424

Google Scholar

[5] Rabinkin A. New applications of high temperatures MBF amorphous brazing filer metals[R]. Honeywel, U.S. A, (2002).

Google Scholar

[6] Guo J. High frequency braze welding process under inert gas protection for cemented carbide product[J]. Metal Industries, 1999, 33(3): 124-128.

Google Scholar