Investigations of Hydrodynamics and Heat Transfers in a Modified Reactor Using Fluid Mixers

Abstract:

The performance of a packed-bed reactor typically used in Gas-to-Liquid (GTL) or Biomass-to-Liquid (BTL) technologies in producing liquid fuels was affected by unfavorable high pressure drop, flow and temperature maldistributions which in turn could cause severe catalyst deactivation, and result in inefficient reaction etc. A certain types of fluid mixers such as Kenics^TM or Mixing & Stirring type static mixers had been suggested to improve the performance of this type of reactor. In order to design a proper modified reactor by mean of an installation of such mixing structures for the pilot plant in liquid fuel production via Fischer-Tropsch Synthesis (FTS) conducted at the RCC research center, this study had to characterize the hydrodynamics and heat transfers within a packed-bed modified by Kenics^TM and Mixing & Stirring type static mixers. During the FTS, the syngas i.e. CO and H₂ was fed through the bed of catalyst causing the temperature rise due to an exothermic enthalpy, and the flow and temperature distributions of mixed gas within the catalyst bed were influenced. The improved velocity and temperature distributions and heat transfers were exhibited by using such mixers e.g. rather uniform distributions and higher heat transfer coefficient. Thus, the better performance of the reactor could be expected.

• Periodical: Advanced Materials Research (Volumes 805-806)
• Pages: 1250-1256
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.805-806.1250
• Online since: September 2013
• Authors: Prayut Jiamrittiwong, Karn Pana-Suppamassadu, Phavanee Narataruksa, Sabaithip Tungkamani, Nuwong Chollacoop
• Keywords: Fischer-Tropsch Synthesis, Heat Transfer, Hydrodynamic, Static Mixers

References

[1] A.P. Steynberg, M.E. Dry, B.H. Havis, and B.B. Berman, Chapter 2 Fischer–Tropsch reactors, Studies in Surface Science and Catalysis, (2004), 152: 64.

DOI: 10.1016/s0167-2991(04)80459-2

[2] M.J.A. Tijimensen, A.P.C. Faaij, C.N. Hamelinck, M.R.M., and van Hardeveld, Biomass and Bioenergy, Vol. 23 (2002), pp.129-152.

[3] G. Calleja, A.D. Lucas, and R.V. Grieken, Co/HZSM-5 catalysts for syngas conversion: influence of process variables. Fuel, Vol. 74 (3) (1995), p.445–451.

DOI: 10.1016/0016-2361(95)93480-2

[4] E.H. Stitt. Reactor technology for syngas and hydrogen, In: E. Derouane, V. Parmon, F. Lemos and F. Ramoa-Ribiero, Editors. Sustainable Strategies for the Upgrading of Natural Gas: Fundamentals, Challenges and Opportunities, NATO Science Series II Vol. 191, Kluwer Academic Publishers, Dordrecht, (2005).

DOI: 10.1007/1-4020-3310-9_10

[5] Y. Wang, Y. Xu, y. Li, Y. Zhao, and B. Zhang, Heterogeneous modeling for fixed-bed Fischer–Tropsch synthesis: reactor model and its applications. Chemical Engineering Science, Vol. 58 (3–6) (2003), p.867–875.

DOI: 10.1016/s0009-2509(02)00618-8

[6] N.J. Mariani, S.D. Keegan, O.M. Martinez, and G.F. Barreto, A one-dimensional equivalent model to evaluate overall reaction rates in catalytic pellets, Transactions of the Institution of Chemical Engineers, Vol. 81 (2003), pp.1033-1042.

DOI: 10.1205/026387603322482266

[7] V.V. Ranade, Improve reactors via CFD, Chem. Engr, (1997), p.96–102.

[8] S.T. Sie, and R. Krishna, Process development and scale up: II. Catalyst design strategy, Reviews in Chemical Engineering, Vol. 14 (1998), pp.159-202.

DOI: 10.1515/revce.1998.14.3.159

[9] M.A. Marvast, M. Sohrabi, S. Zarrinpashneh, and G. Baghmisheh, Chemical Engineering and Technology, Vol. 28 (1) (2005), p.78–86.

[10] E.H. Stitt. Reactor technology for syngas and hydrogen, In: E. Derouane, V. Parmon, F. Lemos and F. Ramoa-Ribiero, Editors. Sustainable Strategies for the Upgrading of Natural Gas: Fundamentals, Challenges and Opportunities, NATO Science Series II Vol. 191, Kluwer Academic Publishers, Dordrecht, (2005).

DOI: 10.1007/1-4020-3310-9_10

[11] Y. Wang, Y. Xu, Y. Li, Y. Zhao, and B. Zhang, Heterogeneous modeling for fixed-bed Fischer–Tropsch synthesis: reactor model and its applications, Chemical Engineering Science, Vol. 58 (3–6) (2003), p.867–875.

DOI: 10.1016/s0009-2509(02)00618-8

[12] P. Narataruksa, K. Pana-Suppamassadu, S. Tungkamani, R. Kokoo, and P. Jiamrittiwong, Simulation of the Flow in a Packed-Bed with and without a Static Mixer by Using CFD Technique, Proceedings of world academy of science, Engineering and Technology, Vol. 41 (2009).

DOI: 10.1016/s1003-9953(11)60388-5