Global Effects of MWCNT-W Nanofluid in a Shell & Tube Heat Exchanger

Abstract:

Global warming and other problems can be reduced by effectively using the available materials and facilities. Heat exchangers play an important part of the field of energy conservation, conversion and recovery. Shell & tube heat exchangers are widely using in industrial processes and power plants. Suspension of small amounts of nanoparticles into the base fluid called nanofluid can reduce the global energy losses. Thermal conductivity of Multi Walled Carbon Nanotube (MWCNT) is highest among the different nano materials [1]. Therefore, in this paper, the overall performance of a shell & tube heat exchanger has been analytically investigated by using MWCNT-W nanofluid with 0.02-0.1 vol. fractions of MWCNT and compared with water. Mathematical formula, specifications of heat exchanger and nanofluid properties were taken from the literatures to analyze the energy performance and other effects within the system. It is found that for certain mass flow rates of nanofluid and base fluid, the convective heat transfer coefficient increased around 4% to 17% compared to pure water, respectively for 0.02-0.1 vol. fractions of MWCNT in water. However, for constant vol. fractions of MWCNT, convective heat transfer coefficient of the above nanofluid negligibly changed for different mass flow rates. Furthermore, energy effectiveness of the heat exchanger also improved approximately by 3% to 14%, respectively. This energy effectiveness again improved with the decrease of the mass flow rates of nanofluids (tube side) and increase of the mass flow rates of base fluid (shell side). As energy effectiveness is increased by using MWCNT-W nanofluid, therefore, a significant amount of heat losses will be reduced. As a result, with the reduced heat emissions, global warming and greenhouse effects can be reduced by using MWCNT-W nanofluid as working fluid in shell & tube heat exchanger system.

• Periodical: Advanced Materials Research (Volume 832)
• Pages: 154-159
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.832.154
• Online since: November 2013
• Authors: Islam Md. Shahrul, I.M. Mahbubul, Rahman Saidur, Mohd Faizul Mohd Sabri, Muhammad Afifi Amalina, S.S. Khaleduzzaman
• Keywords: Energy Effectiveness, Global Warming, MWCNT, Shell Heat Exchanger, Tube Heat Exchanger

References

[1] S.M.S. Murshed, K.C. Leong, C. Yang, Thermophysical and electrokinetic properties of nanofluids – A critical review, Appl. Therm. Eng. 28 (17–18) (2008) 2109-2125.

DOI: 10.1016/j.applthermaleng.2008.01.005

[2] Information on http://www.nap.edu/openbook.php?record_id=12781&page=15 in America's Climate Choices. 2011: The National Academies Press.

[3] G.A. Meehl, T.F. Stocker, W.D. Collins, A. Friedlingstein, A.T. Gaye, J.M. Gregory, A. Kitoh, R. Knutti, J.M. Murphy, A. Noda, Global climate projections, (2007).

[4] J.T. Kiehl, K.E. Trenberth, Earth's Annual Global Mean Energy Budget, Bulletin of the American Meteorological Society 78 (2) (1997) 197-208.

DOI: 10.1175/1520-0477(1997)078<0197:eagmeb>2.0.co;2

[5] P. Keblinski, J.A. Eastman, D.G. Cahill, Nanofluids for thermal transport, Mater. Today 8 (6) (2005) 36-44.

DOI: 10.1016/s1369-7021(05)70936-6

[6] R. Lotfi, A.M. Rashidi, A. Amrollahi, Experimental study on the heat transfer enhancement of MWNT-water nanofluid in a shell and tube heat exchanger, Int. Commun. Heat Mass 39 (1) (2012) 108-111.

DOI: 10.1016/j.icheatmasstransfer.2011.10.002

[7] Information on http://en.wikipedia.org/wiki/Water_(data_page); Accessed in: 17 February 2013.

[8] J. Wang, M. Musameh, Y. Lin, Solubilization of Carbon Nanotubes by Nafion toward the Preparation of Amperometric Biosensors, J. Am. Chem. Soc. 125 (9) (2003) 2408-2409.

DOI: 10.1021/ja028951v

[9] M. Fakoor Pakdaman, M.A. Akhavan-Behabadi, P. Razi, An experimental investigation on thermo-physical properties and overall performance of MWCNT/heat transfer oil nanofluid flow inside vertical helically coiled tubes, Exp. Therm. Fluid Sci. 40 (0) (2012) 103-111.

DOI: 10.1016/j.expthermflusci.2012.02.005

[10] F.P. Incropera, D.P. DeWitt, T.L. Bergman, A.S. Lavine, Fundamentals of heat and mass transfer, sixth ed., John Wiley & Sons, Canada, 2011.

[11] K.Y. Leong, R. Saidur, T.M.I. Mahlia, Y.H. Yau, Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants, Int. J. Heat Mass Tran. 55 (4) (2012) 808-816.

DOI: 10.1016/j.ijheatmasstransfer.2011.10.027

[12] S. Kakac, A. Pramuanjaroenkij, H. Liu, Heat exchangers: selection, rating, and thermal design. 2012: CRC press.

[13] R.K. Shah, D.P. Sekulic, Fundamentals of Heat Exchanger Design, Wiley (2003).

[14] Y. Xuan, W. Roetzel, Conceptions for heat transfer correlation of nanofluids, Int. J. Heat Mass Tran. 43 (19) (2000) 3701-3707.

DOI: 10.1016/s0017-9310(99)00369-5

[15] R.L. Hamilton, O.K. Crosser, Thermal Conductivity of Heterogeneous Two-Component Systems, Ind. Eng. Chem. Fund. 1 (3) (1962) 187-191.

DOI: 10.1021/i160003a005

[16] İ. Teke, Ö. Ağra, Ş.Ö. Atayılmaz, H. Demir, Determining the best type of heat exchangers for heat recovery, Appl. Therm. Eng. 30 (6–7) (2010) 577-583.

DOI: 10.1016/j.applthermaleng.2009.10.021