Study on the Microstructure and Properties of WC Steel Bonded Carbide by Composite Electroslag Remelting

Abstract:

The composite electroslag remelting technology was prepared with Cr12Mo1V1 steel as matrix, and the WC particles as hard phase steel bonded carbide. By means of metallographic analysis and scanning electron microscopy and other methods to study the microstructure and grinding crack morphology of the composites, and rockwell hardness and friction and wear experiment was carried out. The results show that WC particles had no obvious slant phenomenon, partly dissolved in the steel matrix, Fe₃W₃C multiple carbides precipitated after cooling. And the external hardness and abrasion resistance fo the roll were higher than the core, combined with good WC particles and steel matrix, and wear surface grinding marks was small, shallow furrowed, improved the roll wear resistance and service life.

• Periodical: Advanced Materials Research (Volume 886)
• Pages: 92-96
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.886.92
• Online since: January 2014
• Authors: Chun Hong Zhang, Ning Zhang*, Jia Nan Fang, Ying Huai Qiang
• Keywords: Composite Electroslag Remelting, Steel Bonded Carbide, WC Particles

References

[1] Ashok Kumar Srivastava, Karabi Das. Microstructual and abrasive wear study of (Ti, W)C - reinforced high-manganese austenitic steel matrix composite[J]. Materials Letters, 2008, 62: 3947 - 3950.

DOI: 10.1016/j.matlet.2008.05.049

[2] Ning Zhang, Jinguo Ge, Yinghuai Qiang, etc. Property Study on Shearer Picks brazed by Water soluble Copper brazing Agent[J]. Hot Working Technology, 2013, 42(21): 194-196.

DOI: 10.4028/www.scientific.net/amr.791-793.710

[3] A. Rabiei, L. Vendra, T. Kishi. Fracture behavior of particle reinforced metal matrix composites[J]. Applied Science and Manufacturing, 2008, 39: 294-300.

DOI: 10.1016/j.compositesa.2007.10.018

[4] Ning Zhang, Chunhong Zhang, Yinghuai Qiang. Property Study on High-speed Steel Deposited TiN Coatings by Magnetron Sputter Ion Plating[J]. Applied Mechanics and Material, 2013, 274: 1866-1869.

DOI: 10.4028/www.scientific.net/amm.275-277.1866

[5] Chuanhui Huang. Study on the Visco-elastic Mechanic Model of Particles Filled Composites[J]. Journal of Xuzhou Institute of Technology, 2007, 22(6): 9-13.

[6] Ning Zhang, Li Yang, Feng Yang, etc. Study on Microstructure and Properties of Plasma Arc surfacing Layer for cutting Pick[J]. Applied Mechanics and Materials, 2013, 387: 231-234.

DOI: 10.4028/www.scientific.net/amm.387.231

[7] Ning Zhang, Jinguo Ge, Li Yang, etc. Development of Shearer Picks brazed by Copper brazing Agent and Property Study on brazing[J]. Advanced Materials Research, 2013, 791: 710-713.

DOI: 10.4028/www.scientific.net/amr.791-793.710