A Study on Heat Transfer Analysis and Experiment of Reinforced Concrete Columns Using 500°C Isotherm Method

In Hwan Yeo; Kyu Jae Hwang; Jae Hong An; Jong Ho Lee

doi:10.4028/www.scientific.net/AMR.905.249

Paper Titles

The Study on Mechanical Properties of the Graded Broken Stone Mixed with Cement and Fine Powder
p.230

The Study on Workability and Mechanical Properties of High Volume Fly Ash Underwater Concrete
p.235

Embedded Electronics Influence on the Strength of Carbon Fiber Laminate
p.239

Fatigue Performance of Semiconductor Strain Gauges in GFRP Laminate
p.244

A Study on Heat Transfer Analysis and Experiment of Reinforced Concrete Columns Using 500°C Isotherm Method
p.249

Comparison of Seismic Behaviour for a Single Unit Tunnel Form RC Building before and after Repaired
p.254

Dynamic Properties of Silicate-Grouted Sand at Low Stress Level
p.259

Estimation of Optimal Water Flow Rate of a Steel Roller Shutter with Water Film Cooling System
p.263

Fire Resistance Evaluation of Reinforced Concrete Columns Using Axial Load Ratio and Slenderness Ratio
p.268

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 905A Study on Heat Transfer Analysis and Experiment...

A Study on Heat Transfer Analysis and Experiment of Reinforced Concrete Columns Using 500°C Isotherm Method

Abstract:

This study aims to assess heat transfer analysis of RC columns and unstressed test by applying 500°C isotherm method, which is the strength deterioration estimation method of Eurocode, inorder to use it as basic data for fire engineering design. According to the heat transfer analysis and fire resistance experiment, it was decided an appropriate axial ratio of RC columns that have cross sections of 300 and 350 can be anticipated as 0.49 and 0.59.

You might also be interested in these eBooks

Advances in Applied Materials and Electronics Engineering III

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 905)

Pages:

249-253

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.905.249

Citation:

Cite this paper

Online since:

April 2014

Authors:

In Hwan Yeo*, Kyu Jae Hwang, Jae Hong An, Jong Ho Lee

Keywords:

Assessment of Fire Resistance Performance, Axial Load Ratio, RC Columns, Unstressed Tests

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] I. H. Yeo: A Proposal for Load Ratio of Reinforced Concrete Column Subjected to Standard Fire, University of Seoul (2012).

Google Scholar

[2] Park S, Song K, Jung K, Kim H, Won Y and Choi S; Effect of Thermal properties of Structural Materials on the Fire Resistance of Concrete-Filled Steel Tube column under Constant Axial Loads, A conference Proceeding of Architectural Institute of Korea, Vol. 28, No. 1 (2008).

DOI: 10.1016/j.jcsr.2008.01.002

Google Scholar

[3] K. J. Hwang and S. K. Yoon; Determination of the Fire Protection Thickness of CFT Column Using Heat Transfer Analysis, Journal of Architectural Institute of Korea, Vol. 29, No. 6 (2013), p.65~72.

Google Scholar

[4] EUROCODE 3, Design of Steel Structures – Part 1. 2 General actions – Actions on structures exposed to fire (2002).

DOI: 10.1002/9783433601570.fmatter

Google Scholar

[5] EUROCODE 4, Design of Composite Steel and Concrete – Part 1. 2 General rules – Structural fire design (2005).

DOI: 10.3403/30111111

Google Scholar

[6] ABAQUS/CAE User's Manual Version 6. 5, Hibit, Karlsson& Sorensen, lnc (2005).

Google Scholar

[7] ABAQUS/CAE Analysis User's Manual Version 6. 5, Hibit, Karlsson& Sorensen, lnc (2005).

Google Scholar

[8] ABAQUS/CAE Theory Manual Version 6. 5, Hibit, Karlsson& Sorensen, lnc (2005).

Google Scholar