Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold Casting

Ping Chen; Jian Min Zeng; Wu Kui Gan; Jin Bo Liu

doi:10.4028/www.scientific.net/AMR.941-944.89

Paper Titles

Use of Strain Energy Density W and Q_o as Quality Indices to Study the Effect of Hipping on Cast Aluminium Alloy 354 under Different Aging Conditions
p.66

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy
p.72

Comparison of Mechanical Properties of 357-T6 Aluminum Alloy Aast under Gravity Permanent Casting and Low Pressure Die Casting
p.77

Diffusion Bonding of Commercially Pure Titanium to Q235B Using Copper as Interlayer
p.81

Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold Casting
p.89

Superplasticity Mg Alloy Fabricated by Friction Stir Processing
p.93

The Technique Study on Silicon Brass Recrystallization Annealing Aided by Electric Pulse Treatment
p.97

Wettability, Surface Tension and Work of Adhesion of Cu-Ti Alloys on Yttria Partially-Stabilized Zirconia at 1273K
p.102

Combustion Synthesis Sintering of Ni-Al Powder Alloys
p.108

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 941-944Mechanical Properties of A356 Aluminum Cast Alloy...

Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold Casting

Abstract:

A356 is a heat treatable cast alloy which has been widely applied in aviation and automobile industries. In this paper a Sb modified A356 alloy cast with permanent mold has been investigated in order to improve its mechanical properties by changing the needle morphology of the eutectic silicon. The results show that a small amount of Sb addition can contribute refined eutectic silicon morphology and enhance the mechanical properties, especially elongation of the A356 cast alloy poured in permanent molds. The optimal addition of Sb is 0.2 wt.%.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 941-944)

Pages:

89-92

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.941-944.89

Citation:

Cite this paper

Online since:

June 2014

Authors:

Ping Chen, Jian Min Zeng*, Wu Kui Gan, Jin Bo Liu

Keywords:

Al7Si0.3Mg Alloy, Casting, Mechanical Property

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] R. Alizadeh, R. Mahmudi, Effects of Sb addition on the modification of Mg2Si particles and high-temperature mechanical properties of cast Mg–4Zn–2Si alloy, Journal of Alloys and Compounds. 509 (2011) 9195-9199.

DOI: 10.1016/j.jallcom.2011.06.109

Google Scholar

[2] Y. Liu, J.M. Zeng, Sb and RE Mixed Modification on Al-7Si-0. 3Mg Alloy, SPECIAL CASTING & NONFERROUS ALLOYS, 28 (2008).

Google Scholar

[3] A.K. Prasada Rao, K. Das, B.S. Murty, M. Chakraborty, On the modification and segregation behavior of Sb in Al-7Si alloy during solidification, Materials Letters 62 (2008) 2013–(2016).

DOI: 10.1016/j.matlet.2007.11.005

Google Scholar