Dynamic Disaster Forecasting Technology of the Island Working Face in Outburst Coal Seam

Abstract:

Coal and gas outburst and rock burst are the main threats of the island working face in outburst coal seam. According to the characteristic of No. 11061 island face in outburst coal seam, Liangbei coal mine, China, the dynamic disaster mechanism of island working face in outburst coal seam was analyzed. Based on the monitor of gas concentration and electromagnetic radiation and hydraulic supports resistance in the 11061 island face, the comprehensive forecasting technology of the island face in outburst coal seam was built, then the critical values of gas concentration and electromagnetic radiation and hydraulic supports resistance are calculated by three-ratio method. Finally, the comprehensive forecasting technology is used in the island working face. The results show that the combined action of gas content and stress induces the dynamic disaster of the island working face in outburst coal seam, and the comprehensive forecasting technology can forecast accurately dynamic disaster in the 11061 island face, which has brought successful engineering experience and distinct economic benefit. It can improve significantly the mine production safety level to research the forecasting technology of the island working face in outburst coal seam.

• Periodical: Advanced Materials Research (Volumes 962-965)
• Pages: 914-918
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.962-965.914
• Online since: June 2014
• Authors: Rong Xi Shen*, En Yuan Wang, Shao Bin Hu, Jun Jun Feng
• Keywords: Critical Value, Dynamic Disaster, Forecast, Island Working Face, Outburst Coal Seam

References

[1] Javier Toraňo, Susana Tomo, Eliseo Alvarez, et al. Application of outburst risk indices in the underground coal mines by sublevel caving [J]. International Journal of Rock Mechanics and Mining Sciences, 2012, 50: 91-101.

DOI: 10.1016/j.ijrmms.2012.01.005

[2] Wei G Y, Zhang S J, Xin X P. Study on technology of prevention coal and gas outburst during excavating in outburst coal bed[J]. China Safety Science Journal, 2005, 15(6): 100-104.

[3] Liu M J, Pan H, Zhang W Y, et al. Comprehensive outburst prevention and control technology for rapid excavation of seam gateway with potential outburst[J]. Coal Science and Technology, 2006, 34(4): 1-3.

[4] Dou L M , He Y, Zhang W D. Hazards of rock burst in island coal face and its control[J]. Chinese Journal of Rock Mechanics and Engineering, 2003, 22(11): 1866-1869.

[5] Jiang Y D, Wang H W, Sheng X, et al. Assessment and mitigation of coal bump risk during extraction of an island longwall panel [J]. International Journal of Coal Geology, 2012, 95: 20-33.

DOI: 10.1016/j.coal.2012.02.003

[6] Zheng B S, Xie W B, Dou L M, et al. A surrounding rock controlling technique of roadway affected by dynamic stress in islet face of adjacent coal seam[J]. Journal of China University of Mining & Technology, 2006, 35(4): 483-487.

[7] Fűsser Bernd. The prevention of pressure losses in high-pressure mining supply systems[J]. Coal International, 2004, 252(5): 198-199.

[8] María B. Díaz Aguado, C González. Influence of the stress state in a coal bump-prone deep coalbed: a case study[J]. International Journal of Rock Mechanics & Mining Sciences, 2009(46): 333-345.

DOI: 10.1016/j.ijrmms.2008.07.005

[9] B. Bohloli, E. Hoven. A laboratory and full-scale study on the fragmentation behavior of rocks[J]. Engineering Geology, 2007, 89：1-8.

DOI: 10.1016/j.enggeo.2006.05.010

[10] Wu R X, Zhang P S, Liu S D. Exploration of two-gateway network parallel electrical technology for exploring thin-coal area within coal face[J]. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(9): 1834-1838.