Study on Fiber Laser Single Melting Track During Selective Laser Forming

Jin Hui Liu; Rui Di Li; Can Zhao

doi:10.4028/www.scientific.net/AMR.97-101.4020

Paper Titles

Development of High Speed Scanning System for the Fabrication of 3D Metal Parts Using Electron Beam Selective Melting Technology
p.4001

Prediction and Research of Single Point Incremental Forming Limit
p.4005

Design and Theoretical Analysis of Mini-Plunger Sprayer Used in SW2502 Fused Deposition Modeling System
p.4010

Rapid Fabrication of Micro-Gear via Vacuum Casting Technique of Silicone Rubber Mould
p.4016

Study on Fiber Laser Single Melting Track During Selective Laser Forming
p.4020

Microstructure and Performance Characteristics of Parts Produced via GMAW Surfacing Rapid Forming
p.4024

Experimental Research of Process Parameters in Metal Droplet Deposition Manufacturing
p.4028

Shaping Movement Analysis and Simulation of Ballscrew Manufactured by Cold Rolling
p.4032

Research on Patternless Casting CNC Manufacturing Technology and Development of the Equipment
p.4036

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 97-101Study on Fiber Laser Single Melting Track During...

Study on Fiber Laser Single Melting Track During Selective Laser Forming

Abstract:

Melting tracks with and without powder materials were studied by varying the parameters in selective laser melting. Several characters of melting track such as melting width and gilled state stripes were analyzed combining the relationship between the powder materials and processing parameters. Connected with balling effects, thermal transmission and thermal physical properties of powder materials, the formation of above character were explained. The research result of this work would provide a basic foundation for the further investigation of the quality of end metal component manufactured by selective laser melting method.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 97-101)

Pages:

4020-4023

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.97-101.4020

Citation:

Cite this paper

Online since:

March 2010

Authors:

Jin Hui Liu, Rui Di Li, Can Zhao

Keywords:

Character, Melting Tracks, Selective Laser Melting (SLM)

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Edson Costa Santos, Masanari Shiomi, Kozo Osakada, Tahar Laoui: Int. J. Mach. Tool. Manu. Vol. 46 (2006), p.1459.

Google Scholar

[2] R. H. Morgan, A. J. Papworth, C. Sutcliffe, P. Fox, W. O'Neill: J. Materials Science Vol. 37(2002), p.3093.

Google Scholar

[3] T H C Childs, C Hauser, and M Badrossamay: Proc. IMechE Part B: J. Eng. Manu. Vol. 219(2005), p.339.

Google Scholar

[4] J.P. Kruth, L. Froyen , J. Van Vaerenbergh, P. Mercelis, M. Rombouts, B. Lauwers: J. Mater. Process. Tech. Vol. 149(2004), p.616.

DOI: 10.1016/j.jmatprotec.2003.11.051

Google Scholar

[5] I. Yadroitsev, Ph. Bertrand, I. Smurov: Appl. Surf. Sci. Vol. 253(2007), p.8064 1000µm Fig. 4 Variation of powder melting track with scanning speed at laser powder of 98W.

Google Scholar