Development of High Speed Scanning System for the Fabrication of 3D Metal Parts Using Electron Beam Selective Melting Technology

Hai Bo Qi; Jian Qiang Wang; Li Ning Yang

doi:10.4028/www.scientific.net/AMR.97-101.4001

Paper Titles

Investigation of UV Light Intensity Distribution of Integral Micro-Stereolithography System
p.3985

Research on Solidification Characteristics of Resin in High-Resolution Stereolithography System
p.3989

Effect of Corrosion Pillowing on Mechanical Properties of Lap Joint
p.3993

Development of a Novel Laser-Sintering Machine for Fabrication of Artificial Bone
p.3997

Development of High Speed Scanning System for the Fabrication of 3D Metal Parts Using Electron Beam Selective Melting Technology
p.4001

Prediction and Research of Single Point Incremental Forming Limit
p.4005

Design and Theoretical Analysis of Mini-Plunger Sprayer Used in SW2502 Fused Deposition Modeling System
p.4010

Rapid Fabrication of Micro-Gear via Vacuum Casting Technique of Silicone Rubber Mould
p.4016

Study on Fiber Laser Single Melting Track During Selective Laser Forming
p.4020

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 97-101Development of High Speed Scanning System for the...

Development of High Speed Scanning System for the Fabrication of 3D Metal Parts Using Electron Beam Selective Melting Technology

Abstract:

In this article a method of high speed scanning in Electron Beam Selective Melting (EBSM) technology is presented. Based on the conventional point-to-point vector scanning method, a scanning method nominated profile vector scanning was developed in cooperation with the existing manufacturing system. A scanning speed up to 200m/s was realized using the improved system. 3D parts from 316L metal powder were fabricated using this scanning system and the quality of the fabricated parts was evaluated.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 97-101)

Pages:

4001-4004

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.97-101.4001

Citation:

Cite this paper

Online since:

March 2010

Authors:

Hai Bo Qi, Jian Qiang Wang, Li Ning Yang

Keywords:

316L Metal Powder, 3D Part, Electron Beam Selective Melting (EBSM), High Speed Scanning

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] J. E. Matz and T. W. Eagar: Metallurgical and Materials Transactions. Vol. 33 (8) (2002), p.2559.

Google Scholar

[2] D. Cormier, O. Harrysson and H. West: Rapid Prototyping Journal, Vol. 10 (1) (2004), p.35.

Google Scholar

[3] H.B. Qi, Y.N. Yan, F. Lin, W He and R J Zhang: J. Manufacturing Engineering, Vol. 220 (B11) (2006), p.1684.

Google Scholar

[4] Suman Das, in: Twelfth Solid Freeform Fabrication Symposium-2001，edited by Joel Barlow，Joseph Beaman and David Bourell. Publications/University of Texas at Austin, Austin (2001).

Google Scholar

[5] Z. WANG, Y. GAO and B. XU: Vacuum Electron Beam Welding Equipment and Technology (The Atom Energy Press, Beijing 1990) (In Chinese).

Google Scholar