Shale Reservoirs Multi-Fracture Fracturing Technique and Studies on Reservoirs Stresses

Abstract:

Theoretical studies have shown that the generation of the hydraulic fractures reduces or even reverses the stress anisotropy near the fractures and results in increasing the complexity of fractures. A finite element model was established in which the pore pressure elements were used to simulate the behavior of porous media and the pore pressure cohesive elements were adopted to catch the characters of hydraulic fractures. A special fracturing manner was adopted to create complicated fracture networks by reducing or even reversing the stress anisotropy between fractures. The geometries of hydraulic fractures, strains, stresses, pore pressure distributions and fluid pressures within the fractures are obtained. The results of the model are fit well with the corresponding theoretical data. The simulation results show that the stress anisotropy is reduced by the generation of the hydraulic fractures, multiple parallel transverse fractures of horizontal well even reverse the stress anisotropy in some place of the reservoir. The simulation results validate the feasibility of the theoretical studies and the expected complex network fractures could be created by adopting special fracturing manner.

• Periodical: Advanced Materials Research (Volumes 986-987)
• Pages: 779-785
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.986-987.779
• Online since: July 2014
• Authors: Guang Ming Zhang*, Jian Dong Liu, Chun Ming Xiong, Lu He Shen, Juan Jin
• Keywords: Finite Element, Fracture, Fracturing, Shale, Stress Anisotropy

References

[1] Chen Zuo, Xue Chengjin, Jiang Tingxue, et al. The Multi-fracture fracturing technique of shale-gas wells and domestic application suggestions [J]. Natural Gas Industry, 2010, 30(10): 30-32.

[2] Lei Qun, Xu Yun, Jiang Tingxue, et al. Fracture network, fracturing technique for improving post-fracturing performance of low and ultra-low permeability reservoirs [J]. Acta Petrolei Sinca, 2009, 30(2): 237-241.

[3] Cipolla, C.L., Warpinski, N.R., Mayerhofer, M.J., Lolon, E.P. 2008. The Relationship Between Fracture Complexity, Reservoir Properties, and Fracture Treatment Design [J]. Paper 115769 presented at the 2008 SPE Annual Technical Conference and Exhibition held in Denver, Colorado, USA, 21-24 September.

DOI: 10.2118/115769-ms

[4] George, E.K. 2010. Thirty Years of Gas Shale Fracturing: What Have We Learned [J]? Paper 133456 presented at the SPE Annual Technical Conference and Exhibition held in Florence, Italy, 19-22 September.

DOI: 10.2118/133456-ms

[5] Warpinski, N.R., and Teufel, T.W. 1987. Influence of Geologic Discontinuities on Hydraulic Fracture Propagation [J]. JPT, (39): 2. 209-220. DOI: 10. 2118/13224-PA.

DOI: 10.2118/13224-pa

[6] Warpinski, N.R. 1991. Hydraulic Fracturing in Tight, Fissured Media. JPT, February, 146.

[7] Warpinski, N.R., Lorenz, J.C., Branagan, P.T., Myal, R., Gall, B.L. 1993. Examination of a Cored Hydraulic Fracture in a Deep Gas Well [J]. SPE Prod & Fac. (8): 3 150-158. DOI: 10. 2118/22876-PA.

DOI: 10.2118/22876-pa

[8] Yao Fei, Chen Mian, Wu Xiaodong, et al. Physical simulation of hydraulic fracture propagation in naturally fractured formations [J]. Oil Drilling & Production Technology, 2008, 30(3): 83-86.

[9] Mayerhofer, M.J., Lolon, E.P., Warpinski, N.R., Cipolla, C.L., Walser, D., Rightmire, C.M. 2008. What is Stimulated Reservoir Volume (SRV) [J]? Paper 119890 presented at the 2008 SPE Shale Gas Conference held in Fort Worth, Texas, USA, 16-18 November.

DOI: 10.2118/119890-ms

[10] Warpinski, N.R., Mayerhofer, M.J., Vincent, M.C., Lolon, E.P. 2008. Stimulating Unconventional Reservoirs: Maximizing Network Growth while Optimizing Fracture Conductivity [J]. Paper 114173 presented at the 2008 SPE Unconventional Reservoirs Conference held in Keystone, Colorado, USA, 10-12 February.

DOI: 10.2118/114173-ms

[11] Cipolla, C.L., Lolon, E.P. Erdle, J.C., Tathed, V. 2009. Modeling Well Performance in Shale-Gas Reservoirs [J]. Paper 125532 presented at the 2009 SPE/EAGE Reservoir Characterization and Simulation Conference held in Abu Dhabi, UAE, 19-21 October.

DOI: 10.3997/2214-4609-pdb.170.spe125532

[12] Rushing, J. and Sullivan, R. 2003. Evaluation of a Hybrid Water-Frac Stimulation Technology in the Bossier Tight Gas Sand Play [J]. Paper SPE 84394 presented at the Annual Technical Conference and Exhibition, Denver, Colorado, 5-8 October. DOI: 10. 2118/84394-MS.

DOI: 10.2118/84394-ms

[13] Sneddon, I.N. 1946. The Distribution of Stress in the Neighborhood of a Crack in an Elastic Solid [J]. Proc., Royal Society of Lodon, Series A 187, 229-260.

[14] Soliman, M.Y., East, L., and Adams, D. 2008. Geomechanics Aspects of multiple Fracturing of Horizontal and Vertical Wells [J]. SPE Drilling and Completion. (23)3: 217-228. DOI: 10. 2118/86992-PA.

DOI: 10.2118/86992-pa

[15] Soliman, M.Y., East, L., and Augustine, J. 2010. Fracturing Design Aimed at Enhancing Fracture Complexity [J]. Paper 130043 presented at the SPE EUROPEC/EAGE Annual Conference and Exhibition held in Barcelona, Spain, 14-17 June.

DOI: 10.2118/130043-ms

[16] East, L., Soliman, M.Y., and Augustine, J. 2010. Methods for Enhancing Far-field Complexity in Fracturing Operations [J]. Paper 133380 presented at the SPE Annual Technical Conference and Exhibition held in Florence, Italy, 19-22 September.

DOI: 10.2118/133380-ms

[17] Cheng, Y. 2010. Impacts of the Number of Perforation Clusters and Cluster Spacing on Production Performance of Horizontal Shale Gas Wells [J]. Paper 138843 presented at the SPE Eastern Regional Meeting held in Morgantown, West Virginia, USA, 12-14 October.

DOI: 10.2118/138843-ms

[18] Roussel, N.P., Sharma, M.M. 2010. Optimizing Fracture Spacing and Sequencing in Horizontal Well Fracturing [J]. Paper 127986 presented at the 2010 SPE International Symposium and Exhibition on Formation Damage Control held in Lafayette, Louisiana, USA, 10-12 February.

DOI: 10.2118/127986-ms