Technological Process of Manufacturing a Gear Wheel Using the Abaqus Software Product Method

Abstract:

In this paper, we consider a detailed technological process for manufacturing parts, namely, a gear wheel. The proposed method with the intervention of modern 3D modelling makes it possible to improve the main indicators of quality and strength of parts. Based on the results obtained, a cycloid transcendental system of circular motion of a gear wheel with the specified basic parameters was modelled. Using multifunctional modules, we studied the vibrations of the gear wheel at different points in time. It was found that due to the fatigue and contact strength, it is possible to ensure uniform flexural strength of the gear teeth. And also, by adjusting the profile of the teeth of the part, we selected the desired strengthening coefficient. The presented dependence of the angles of inclination of the gear teeth on the transformation coefficient allows you to improve the main indicators of quality and strength by at least 2 %.

• Periodical: Advances in Science and Technology (Volume 114)
• Pages: 1-8
• DOI: https://doi.org/10.4028/p-86xkq3
• Online since: July 2022
• Authors: Artem Ruban*, Viktoriya Pasternak, Anna Zhyhlo, Volodymyr Konoval
• Keywords: Modelling, Modulus, Oscillation, Part, Profile, Quality Indicators, Shear Angle, Strength, Teeth, Time Point, Transcendent System, Transformation Step

References

[1] F. Sgarbossa, M. Peron, Fr. Lolli, El. Balugani, Conventional or additive manufacturing for spare parts management: an extensive comparison for Poisson demand, International Journal of Production Economics 233 (2021) 1-16.

DOI: 10.1016/j.ijpe.2020.107993

[2] V. Barannik, Y. Ryabukha, N. Barannik, D. Barannik, Indirect Steganographic Embedding Method Based on Modifications of the Basis of the Polyadic System. Proceedings – 15th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering, TCSET 2020. 9088673 (2020) 699–702.

DOI: 10.1109/tcset49122.2020.235522

[3] A. Kovalov, Yu. Otrosh, M. Surianinov, T. Kovalevska, Experimental and computer researches of ferroconcrete floor slabs at high-temperature influences, Materials Science Forum, 968 (2019) 361–367.

DOI: 10.4028/www.scientific.net/msf.968.361

[4] I. Abbas, Ah. Abdulwahhab, A. Shabeeb, Influence of FECL3 on material removal rate and surface roughness in chemical machining process, Kufa Journal of Engineering 10 (2019) 44-55.

DOI: 10.30572/2018/kje/100104

[5] Shostak I., Rahimi Y., Danova M., Feoktystova O., Melnyk O. Ensuring the security of the full logistics supply chain based on the вlockсhain technology. CEUR Workshop Proceedings, 2393 (2019) 655–663.

[6] K. Amresh, Gr. Neelkant, M. Alakesh, S. Jasgurpreet, K. Raman, S. Sunpreet, P. Chander, Iu. Catalin, Investigating the influence of WEDM process parameters in machining of hybrid aluminum composites, Advanced Composites Letters, 29 (2020) 1-14.

DOI: 10.1177/2633366x20963137

[7] Sokolov D., Sobyna V., Vambol S., Vambol V. Substantiation of the choice of the cutter material and method of its hardening, working under the action of friction and cyclic loading. Archives of Materials Science and Engineering, 94 2 (2018) 49–54.

DOI: 10.5604/01.3001.0012.8658

[8] J. Pereira Rodrigues, C. Francisco do Nascimento, S. Rogerio de Freitas Batista, L. Vilarinho, J. Meneses Barros, R. Gonçalves, Influence of the surface finish on corrosion resistance of stainless steels through machining and remelting on weld bead, Acta Scientiarum, Technology, 41 (2019) 1-10.

DOI: 10.4025/actascitechnol.v41i1.37732

[9] S. Vambol, V. Vambol, O. Kondratenko, Y. Suchikova, O. Hurenko Assessment of improvement of ecological safety of power plants by arranging the system of pollutant neutralization. Eastern-European Journal of Enterprise Technologies, 3 10–87 (2017) 63–73.

DOI: 10.15587/1729-4061.2017.102314

[10] G. Khrypunov, S. Vambol, N. Deyneko, Y. Suchikova, Increasing the efficiency of film solar cells based on cadmium telluride, Eastern-European Journal of Enterprise Technologies, 6 5 (2016) 12–18.

DOI: 10.15587/1729-4061.2016.85617

[11] J. Varga, T. Tóth, P. Frankovský, L. Dulebová, E. Spišák, I. Zajaˇcko, J. Živˇcák, The influence of automated machining strategy on geometric deviations of machined surfaces, Applied Sciences, 11 (2021) 1-15.

DOI: 10.3390/app11052353

[12] A. Kondratiev, V. Píštěk, L. Smovziuk, M. Shevtsova, A. Fomina, P. Kučera, Stress–strain behaviour of reparable composite panel with step–variable thickness, Polymers, 13 21 (2021) 3830.

DOI: 10.3390/polym13213830

[13] Ar. Sidhu, S. Singh, R. Kumar, D. Pimenov, Kh. Giasin, Prioritizing energy-intensive machining operations and gauging the influence of electric parameters: an industrial case study, Energies, 14 (2021) 1-39.

DOI: 10.3390/en14164761

[14] A. Panchenko, A. Voloshina, O. Boltyansky, I. Milaeva, I. Grechka, S. Khovanskyy, M. Svynarenko, O. Glibko, M. Maksimova, N. Paranyak, Designing the flow-through parts of distribution systems for the PRG series planetary hydraulic motors, Eastern-European Journal of Enterprise Technologies, 3 1–93 (2018) 67–77.

DOI: 10.15587/1729-4061.2018.132504

[15] V. Pasternak, O. Zabolotnyi, N. Ilchuk, D. Cagáňová, Y. Hulchuk, Improvement of processes for obtaining titanium alloys for manufacturing parts with design elements, Lecture Notes in Mechanical Engineering, (2022) 323-333.

DOI: 10.1007/978-3-030-91327-4_32

[16] S. Mehrafsun, H. Messaoudi, Dynamic process behavior in laser chemical micro machining of metals, Journal of Manufacturing and Materials Processing, 2 (2018) 1-18.

DOI: 10.3390/jmmp2030054

[17] Wan-Sik. Woo, Eun-Jung. Kim, Ho-In. Jeong, Choon-Man Lee, Laser-assisted machining of Ti-6Al-4V fabricated by DED additive manufacturing, International Journal of Precision Engineering and Manufacturing-Green Technology, 7 (2020) 559-572.

DOI: 10.1007/s40684-020-00221-7

[18] J. Yuan, J. Boyd, D. Covelli, T. Arif, S. Fox-Rabinovich, S. Veldhuis, Influence of workpiece material on tool wear performance and tribofilm formation in machining hardened steel, Lubricants, 4 (2016) 1-10.

DOI: 10.3390/lubricants4020010

[19] H. Sulym, Ia. Pasternak, V. Pasternak, Boundary element modeling of pyroelectric solids with shell inclusions, Mechanics and Mechanical Engineering, 22 (2018) 727-737.

DOI: 10.2478/mme-2018-0057

[20] L. Kondratenko, L. Mironova, On the influence of thermal processes on the dynamics of a drill during deep hole machining, MATEC Web of Conferences, 298 (2019) 1-7.

DOI: 10.1051/matecconf/201929800008

[21] Matyushenko I., Danova M., Feoktystova O., Melnyk R. Formation of teams of performers of projects at innovative enterprises within the framework of the Industry 4.0 concept. International Journal of Supply Chain Management, 8 4 (2019) 962–969.

[22] S. Hameed, H. González Rojas, J. Perat Benavides, A. Nápoles Alberro, A. Sánchez Egea, Influence of the regime of electropulsing-assisted machining on the plastic deformation of the layer being cut, Materials, 11 (2018) 1-10.

DOI: 10.3390/ma11060886

[23] B. Kucharska, J. Sobiecki, P. Czarniak, K. Szymanowski, K. Cymerman, D. Moszczy´nska, P. Panjan, Influence of different types of cemented carbide blades and coating thickness on structure and properties of TiN/AlTiN and TiAlN/a-C:N coatings deposited by PVD techniques for machining of wood-based materials, Materials, 14 (2021) 1-17.

DOI: 10.3390/ma14112740

[24] Singh Nain S., Sai R., Sihag P., Vambol S., Vambol V. Use of machine learning algorithm for the better prediction of SR peculiarities of WEDM of Nimonic-90 superalloy. Archives of Materials Science and Engineering, 95 1 (2019) 12–19.

DOI: 10.5604/01.3001.0013.1422

[25] O. Zabolotnyi, V. Pasternak, I. Andrushchak, N. Ilchuk, K. Svirzhevskyi, Numerical simulation of the microstructure of structural-inhomogeneous materials, Lecture Notes in Mechanical Engineering, (2020) 562-571.

DOI: 10.1007/978-3-030-50794-7_55

[26] An. Markopoulos, Em. Papazoglou, P. Karmiris-Obrata´nski, Experimental study on the influence of machining conditions on the quality of electrical discharge machined surfaces of aluminum alloy Al5052, Machines, 8 (2020) 1-13.

DOI: 10.3390/machines8010012

[27] Mygal V., Mygal G., Balabanova L. Visualization of signal structure showing element functioning in complex dynamic systems – Cognitive aspects. Journal of Nano- and Electronic Physics, 11 2 (2019) № 02013.

DOI: 10.21272/jnep.11(2).02013

[28] V. Pasternak, L. Samchuk, N. Huliieva, I. Andrushchak, A. Ruban, Investigation of the properties of powder materials using computer modeling, Materials Science Forum, 1038 (2021) 33-39.

DOI: 10.4028/www.scientific.net/msf.1038.33

[29] Potopalska, K., Tyshkovets, O., Kalinovskyi, A., Vasyliev, S. An experimental study on elastic and strength properties of addictively-manufactured plastic materials (2021) Materials Science Forum, 1038 MSF, 162-167.

DOI: 10.4028/www.scientific.net/msf.1038.162

[30] Chen. Xuehui, Xu. Xin, Liu. Wei, Huang. Lei, Li. Hao, Wu. Chao, Mu. Weihao, Li. Xiang, Study on the influence of surface temperature field of aluminum alloy etched by laser water jet composite machining, Materials,13 (2020) 1-21.

DOI: 10.3390/ma13143206

[31] I. Ryshchenko, L. Lyashok, A. Vasilchenko, A. Ruban, L. Skatkov, Electrochemical synthesis of crystalline niobium oxide, Materials Science Forum, 1038 (2021) 51-60.

DOI: 10.4028/www.scientific.net/msf.1038.51

[32] R. Cep, L. Cepova, Cr. Borzan, J. Kasal, M. Sadilek, D. Sokova, M. Hatala, J. Petru, D. Stancekova, M. Pagac, J. Hajnys, O. Mizera, Influence of coolant pressure size on surface roughness when stainless steel machining, MATEC Web of Conferences, 299 (2019) 1-10.

DOI: 10.1051/matecconf/201929904002

[33] Yu. Otrosh, M. Surianinov, O. Holodnov, O. Starova, Experimental and computer researches of ferroconcrete beams at high-temperature influences, Materials Science Forum, 968 (2019) 355–360.

DOI: 10.4028/www.scientific.net/msf.968.355

[34] B. Freire, M. Babcinschi, L. Ferreira, B. Senaris, F. Vidal, P. Neto, Direct energy deposition: a complete workflow for the additive manufacturing of complex shape parts, Procedia Manufacturing, 51 (2020) 671-677.

DOI: 10.1016/j.promfg.2020.10.094

[35] Gaydamaka A., Kulik G., Frantsuzov V., Hrechka I., Khovanskyi S., Rogovyi A., Svynarenko M., Maksimova M., Paraniak N. Devising an engineering procedure for calculating the ductility of a roller bearing under a no-central radial load. Eastern-European Journal of Enterprise Technologies, 3 7–99 (2019) 6–10.

DOI: 10.15587/1729-4061.2019.168145

[36] O. Blyznyuk, A. Vasilchenko, A. Ruban, Y. Bezuhla, Improvement of fire resistance of polymeric materials at their filling with aluminosilicates, Materials Science Forum, 1006 (2020) 55-61.

DOI: 10.4028/www.scientific.net/msf.1006.55

[37] Yan. Li, Chen. Su, Jianjun. Zhu, Comprehensive review of wire arc additive manufacturing: hardware system, physical process, monitoring, property characterization, application and future prospects, Results in Engineering, 13 (2022) 1-17.

DOI: 10.1016/j.rineng.2021.100330

[38] O.Z. Dveirin, O.V. Andreev, A.V. Kondrat'ev, V.Ye. Haidachuk, Stressed state in the vicinity of a hole in mechanical joint of composite parts, International Applied Mechanics, 57 2 (2021) 234-247.

DOI: 10.1007/s10778-021-01076-4

[39] Deyneko N., Semkiv O., Soshinsky O., Strelets V., Shevchenko R. Results of studying the cu/ito transparent back contacts for solar cells sno2:f/cds/cdte/cu/ito. Eastern-European Journal of Enterprise Technologies, 4 5–94 (2018) 29–34.

DOI: 10.15587/1729-4061.2018.139867

[40] N. Syreyshchikova, D. Pimenov, T. Mikolajczyk, L. Moldovan, Technological support of abrasive manufacturing of products on a flexible basis by evaluating performance indicators, Procedia Manufacturing, 46 (2020) 38-43.

DOI: 10.1016/j.promfg.2020.03.007

[41] R. Wdowik, R. Ratnayake, M. Magdziak, Ar. Bełzo, Technological process planning focused on complex manufacturing processes of the digital era, Procedia Manufacturing 51 (2020) 1076-1081.

DOI: 10.1016/j.promfg.2020.10.151

[42] A. Vasilchenko, O. Danilin, T. Lutsenko, A. Ruban, D. Nestorenko, Features of some polymer building materials behavior at heating, Materials Science Forum, 1006 (2020) 47-54.

DOI: 10.4028/www.scientific.net/msf.1006.47

[43] Hryhoriev S., Petryshchev A., Sinyaeva N., Yurchenko A., Sklyar O., Kvitka S., Borysov V., Vlasiuk V., Tsymbal B., Borysova S. Studying the physicalchemical properties of alloyed metallurgical waste as secondary resourcesaving raw materials. Eastern-European Journal of Enterprise Technologies, 4 12 (2018) 43–48.

DOI: 10.15587/1729-4061.2018.140924