For Libraries For Publication Open Access Downloads About Us Contact Us
Paper Titles
The Influence of Friction Deformation on the Microstructure and Hardening of Beryllium Bronze
p.439
Effective Wear Resistance Parameters of Ion-Plasma Tribological Coatings
p.444
Laser Hardening of Stamps in the Conditions of a Large Engineering Company
p.450
Hardness of the Powder Coating PG-CP4 Applied to Steel 40H13 and Subjected Laser Treatment
p.456
Contact Surfaces Preparation in Manufacturing of Bimetallic Strips CuZn10 Brass - C22E Steel - CuZn10 Brass
p.463
Targeted Alternation in Properties of Solid Amorphous-Nanocrystalline Material in Exposing to Nanosecond Laser Radiation
p.469
Multiple Reflow Influence over the FeCoCrAlTiCuNiMo Coating Obtained by Plasma Metallization on its Wear Resistance under Dry Friction
p.475
Friction Coefficient of the Coating PG-CP4 Sprayed to 40H13 Steel by Plasma and Processed by Laser
p.482
Mechanical Properties of Laser Treated Thin Sample of an Amorphous-Nanocrystalline Metallic Alloy Depending on the Initial Annealing Temperature
p.489

Contact Surfaces Preparation in Manufacturing of Bimetallic Strips CuZn10 Brass - C22E Steel - CuZn10 Brass

Article Preview

Abstract:

Contact surfaces preparation before cold cladding is one of the most important technological operations. A joint plastic components deformation of the of bimetal 1 according to OST 3-6648-91 and bimetal 3 according to OST 3-6649-91 CuZn10 brass - C22E steel - CuZn10 brass (according to EN standard) should be performed with the strongest possible compression to obtain the required layers connection strength, ensuring strip winding into a roll without delamination. We investigated influence of some factors on the bond strength of bimetal layers: surface hardening of contact surfaces, presence of an underlayer on a steel base, contact surfaces micro geometry, components heating temperature in the deformation zone, diffusion annealing after cladding and a bimetal layers thicknesses ratio effect. Cold cladding technological recommendations have been developed for manufacturing of bimetal 1 according to OST 3-6648-91 and bimetal 3 according to OST 3-6649-91 (CuZn10 brass - C22E steel - CuZn10 brass).

You might also be interested in these eBooks
Materials Engineering and Technologies for Production and Processing VII View Preview

Info:

Periodical:

Defect and Diffusion Forum (Volume 410)

Pages:

463-468

DOI:

https://doi.org/10.4028/www.scientific.net/DDF.410.463

Citation:

Cite this paper

Online since:

August 2021

Authors:

Alexander V. Shaparev*

Keywords:

Bimetal, Cold Cladding, Contact Surfaces, Degree of Deformation, Joining Metals

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2021 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

References

[1] Shaparev A.V. Shaparev, Savin I.A. Savin, Improvement of the technology Technology for the production Production of Bimetallic Strips. , – Kursk, University Book, Kursk, 2015, 214 p.

Google Scholar

[2] Kobelev A.G. Kobelev, Troitsky O.Yu. Troitsky, Improvement of production technology of cold-rolled bimetals /,/ Metallurg, . 1997, No. 5 (1997), p.31–-35.

Google Scholar

[3] Blinov V.S. Blinov, Kadoshnikov V.I. Kadoshnikov, Features of cladding and cold rolling of bimetallic strips //, in: Processes and equipment Equipment of metallurgical Metallurgical productionProduction. –, Magnitogorsk, 2000, p.91–-92.

Google Scholar

[4] A. G. Kobelev, M. A. Sharonov, O. A. Kobelev and others, Materials scienceScience. Composite Materials Technology/ A. G. Kobelev, M. A. Sharonov, O. A. Kobelev and others - ,M.: KNORUS, Moscow, 2016., – 270 p.5. Safronov NN, Mingaleeva LB, Savin IA (2018) Optimization of charge material composition in SHS process with ferrosilide fabrication from gaseous wastes of metallurgical production. Chernye Metally 2, p.53–59.

Google Scholar

[5] Safronov, N.N. Safronov, L.B. Mingaleeva, and I.A. Savin. , Optimization of charge material composition in SHS process with ferrosilide fabrication from gaseous wastes of metallurgical production. (2018) , Chernye Metally, . (2) (2018)p.53–-59.

Google Scholar

[6] R.V. Gavariev and I.A. Savin, Research of the mechanism of destruction of compression molds for casting under pressure of color alloys. , Solid State Phenomena, Vol. 284 (2018), p.326–-331., 2018 DOI: https://doi.org/10.4028/www.scientific.net/SSP.284.326.

DOI: 10.4028/www.scientific.net/ssp.284.326

Google Scholar

[7] R.V. Gavariev, I.A. Savin, I.O. Leushin, To the question of casting alloys of non-ferrous metals in the metal mold. , Materials Science Forum, Vol. 946 (2019), p.631–-635, .2019 DOI: https://doi.org/10.4028/www.scientific.net/MSF.946.631.

DOI: 10.4028/www.scientific.net/msf.946.631

Google Scholar

[8] R.V. Gavariev, I.A. Savin, I.O. Leushin, Increasing the quality of the surface of zinc castings by applying multi-layer protective coatings, Tsvetnye Metally. 5 (2017) 84-88. DOI: https://doi.org/10.17580/tsm.2017.05.13.

DOI: 10.17580/tsm.2017.05.13

Google Scholar

[9] I.A. Savin, M. Akhmedeev, Connection of the steel pipes having a polymeric covering on internal and external surfaces. , Solid State Phenomena, Vol. 299 (2020) , p.766–-771., 2020 https://doi.org/10.4028/www.scientific.net/SSP.299.766.

DOI: 10.4028/www.scientific.net/ssp.299.766

Google Scholar

[10] A.V. Shaparev and I.A. Savin, Influence of the state of the contact surfaces on the formation of the joint of steel and brass during cold cladding. , Solid State Phenomena, Vol. 284 (2018), p.319–-325,. 2018 DOI: https://doi.org/10.4028/www.scientific.net/SSP.284.319.

DOI: 10.4028/www.scientific.net/ssp.284.319

Google Scholar

[11] Balabanov, I. P. Balabanov, O. N. Balabanova, and V. N. Gilman. , Development of a parametric model for calculating cutting forces for external cylindrical turning of steel 20CrMNTi, vol. 915, 2020. SCOPUS, www.scopus.com,.

DOI: 10.1088/1757-899x/915/1/012005

Google Scholar

[12] R.V. Gavariev, I.A. Savin, E.N. Soldatkina, Choice of protective coating of metal molds for casting non-ferrous alloys. , Solid State Phenomena, Vol. 299 (2020), p.867–-871, .2020. https://doi.org/10.4028/www.scientific.net/SSP.299.867.

DOI: 10.4028/www.scientific.net/ssp.299.867

Google Scholar

[13] Gavariev R. V. Gavariev, Savin I. A. Savin, Leushin I. O. Leushin, Impact of the functional coating on service durability of injection molds for the zinc alloys pressure casting. , (2016) Tsvetnye Metally = Non-ferrous Metals. No. 1. (2016) pp.66-70 DOI 10.17580/tsm.2016.01.11.

DOI: 10.17580/tsm.2016.01.11

Google Scholar

[14] Gilman, V. N. Gilman, I. P. Balabanov, and A. I. Faskhutdinov. , Improving the efficiency of shaving through the use of wear-resistant coatings, , IOP Conf. Ser.: Mater. Sci. Eng. 570 (2019) 012024.vol. 570, 2019.

DOI: 10.1088/1757-899x/570/1/012024

Google Scholar

[15] Emelyushin A.N. Emelyushin, Petrochenko E.V. Petrochenko, Nefed'ev S.P. Nefed'ev, Investigation of the structure and impact-abrasive wear resistance of coatings of the Fe-C-Cr-Mn-Si system, additionally alloyed with nitrogen. , Welding International. 2013. Т. 27. № (2. С.) (2013) 150-153.

DOI: 10.1080/09507116.2012.695548

Google Scholar

[16] R.V. Gavariev , I.A. Savin, Improvement of surface quality of casting produced by casting under pressure, Solid State Phenomena, . 265 (2017) 988-993. DOI: https://doi.org/10.4028/www.scientific.net/ssp.265.988.

DOI: 10.4028/www.scientific.net/ssp.265.988

Google Scholar

[17] Shaparev, A.V. Shaparev, Savin, I.A. Savin, Ptichkin, S.N. Ptichkin, Application of the polymeric material RIMAMID for production of machine parts. IOP Conference Series: Materials Science and Engineering, 2020, 969(1), 012021DOI: 10.1088/1757-899X/969/1/012021. IOP Conf. Ser.: Mater. Sci. Eng. 969 (2020) 012021.

DOI: 10.1088/1757-899x/969/1/012021

Google Scholar

[18] A.V. Shaparev and I.A. Savin, Calculation of the amount of the reduction required for the formation of compound layers during cold rolling of bimetals, Materials Science Forum, Vol. 870 (2016), pp.328-333, 2016 https://doi.org/10.4028/www.scientific.net/MSF.870.328.

DOI: 10.4028/www.scientific.net/msf.870.328

Google Scholar

[19] A.V. Shaparev, I.A. Savin, Calculation of joint plastic deformation to form metal compound in cold condition, Solid State Phenomena, . 265 (2017) 313-318. DOI: https://doi.org/10.4028/www.scientific.net/ssp.265.313.

DOI: 10.4028/www.scientific.net/ssp.265.313

Google Scholar

[20] Zhu, W. Zhu, Zhao, X. Zhao, Zhang, W. Zhang, Ren, K. Ren, Zhang, Z. Zhang, Li, D. Li, Design and evaluation of fully configured models built by additive manufacturing, (2014) AIAA Journal, . 52 (7) (2014), pp.1441-1451.

DOI: 10.2514/1.j052604

Google Scholar

© 2025 Trans Tech Publications Ltd. All rights are reserved, including those for text and data mining, AI training, and similar technologies. For open access content, terms of the Creative Commons licensing CC-BY are applied.
Scientific.Net is a registered trademark of Trans Tech Publications Ltd.