Solid - Liquid Separation Process in Hydrocyclone by CFD

Abstract:

Mining is a relevant economic activity in many countries. In the treatment of ores, water is an indispensable input. For classification of minerals, the mineral industry uses the hydrocyclone process, where water is used as the medium for transporting dispersed ore particles, that are separated from the liquid by centrifugal force inside anequipmentnamed hydrocyclone.The constant advance of computers processing power, the evolution in the techniques and numerical methods, allow to simulate with great precision complex physical problems of fluid dynamics such as flow in hydrocyclones.In this sense, this work aims to analyze the performance of a concentrating hydrocyclone in the separation of ore and water by CFD. In the fluid dynamics simulation, the Eulerian-Lagrangian approach and the Ansys Fluent software were used. Results of pressure, velocity, and volumetric fraction fields of theinvolved phases are presented and evaluated. From the analysis of the results, it was observed that increasing the flow mixture velocity at the entrance of the equipment tends to increase the separation performance of the hydrocyclone.

• Periodical: Diffusion Foundations (Volume 24)
• Pages: 76-103
• DOI: https://doi.org/10.4028/www.scientific.net/DF.24.76
• Online since: September 2019
• Authors: B. Oliveira Lopes*, Vansostenes Antonio Machado de Miranda, J.M. Freitas de Oliveira, A.G. Barbosa de Lima, S. José dos Santos Filho, F.P. Macedo Farias
• Keywords: CFD, Hydrocyclone, Mining, Separation Efficiency, Simulation

References

[1] M. Saidi, R. Maddahian, B. Farhanieh, H. Afshin, Modeling of flow field and separation efficiency of a deoiling hydrocyclone using large eddy simulation. International Journal of Mineral Processing, 112(113) (2012) 84-93. https://doi.org/10.1016/j.minpro.2012.06.002.

DOI: 10.1016/j.minpro.2012.06.002

[2] J.V.B. Alves, Hydrocyclone for the Separation of Residual Water Oil in Refineries. (Master Dissertationin Chemical Engineering) Federal University of Rio de Janeiro, Brazil (2012). http://186.202.79.107/download/separacao-do-oleo-residual-de-agua-em-refinarias.pdf. Accessed on: January 25, 2018. (In Portuguese).

[3] O. J. Soccol, Construction and evaluation of hydrocyclone for pre-filtration of irrigation water. School of Agriculture, University of São Paulo, Brazil (2003). (In Portuguese).

[4] S. Fu, Y. Fang, H. Yuan, W. Tan, Y. Dong, Effect of the medium's density on the hydrocyclonic separation of waste plastics with different densities. Waste Management,67 (2017) 27–31.

DOI: 10.1016/j.wasman.2017.05.019

[5] Svarovsky, L.Solid-Liquid Separation, Chemical Engineering Series, 4º ed.,Butterworths, London (2000).

[6] C.A.C. Moraes, L. P. M. Marins, D. C. de Melo, F. S. da Silva, J. A. A. Oliveira Jr., M. A. de Souza, L. F. Barca, A. M. R. F. de Souza, C. S. de Almeida. Development of hydrocyclones for high, medium and low oil contents. Oil Production Technical Bulletin.3(2) (2009) 259-287. (In Portuguese).

[7] D.O. Silva, L.G.M. Vieira, F.S. Lobato, M.A.S. Barrozo, Optimization of the design and performance of hydrocyclones by Differential Evolution technique, Chemical Engineering and Processing:Process Intensification,61(2012)1-7 https://doi.org/10.1016/j.cep.2012.07.002.

DOI: 10.1016/j.cep.2012.07.002

[8] K.J. Hwang, Y. W. Hwang, H. Yoshida, Design of novel hydrocyclone for improving fine particle separation using computational fluid dynamics. Chemical Engineering Science,85 (2013) 62-68. https://doi.org/10.1016/j.ces.2011.12.046.

DOI: 10.1016/j.ces.2011.12.046

[9] L. Zhang, L. Wei, B. H. Chang, J. L. Xing, K. Jia,CFD numerical simulation of Archimedes spiral inlet hydrocyclone. IOP Conference Series: Materials Science and Engineering.(2013) https://iopscience.iop.org/article/10.1088/1757-899X/52/7/072021/meta.

DOI: 10.1088/1757-899x/52/7/072021

[10] C. Zhang, D. Wei, B. Cui, T. Li, N. Luo, Effects of curvature radius on separation behaviors of the hydrocyclone with a tangent-circle inlet. Powder Technology,30 (2017) 156–165. https://doi.org/10.1016/j.powtec.2016.10.002.

DOI: 10.1016/j.powtec.2016.10.002

[11] F. He, Y. Zhang, J. Wang, Q. Yang, H. Wang, Y. Tan, Flow patterns in mini-hydrocyclones with different vortex finder depths. Chemical Engineering and Technology,36(11) (2013) 1935–1942.

DOI: 10.1002/ceat.201300204

[12] M.Ghodrat, S.B. Kuang, A.B.Yu, A.Vince, G.D. Barnett, P.J. Barnett, Numerical analysis of hydrocyclones with different conical section designs. Minerals Engineering, 62 (2014) 74–84. https://doi.org/10.1016/j.mineng.2013.12.003.

DOI: 10.1016/j.mineng.2013.12.003

[13] L.G.M. Vieira, M. A. S. Barrozo, Effect of vortex finder diameter on the performance of a novel hydrocyclone separator. Minerals Engineering, 57 (2014) 50–56. https://doi.org/10.1016/j.mineng.2013.11.014.

DOI: 10.1016/j.mineng.2013.11.014

[14] K.J. Hwang, S. P. Chou, Designing vortex finder structure for improving the particle separation efficiency of a hydrocyclone. Separation and Purification Technology,172 (2017) 76–84. https://doi.org/10.1016/j.seppur.2016.08.005.

DOI: 10.1016/j.seppur.2016.08.005

[15] B. Cui, C. Zhang, D. Wei, S. Lu, Y. Feng, Effects of feed size distribution on separation performance of hydrocyclones with different vortex finder diameters. Powder Technology,322 (2017) 114–123. https://doi.org/10.1016/j.powtec.2017.09.010.

DOI: 10.1016/j.powtec.2017.09.010

[16] M.Ghodrat, S.B. Kuang, A.B.Yu, A.Vince, G.D. Barnett, P.J. Barnett, Numerical analysis of hydrocyclones with different vortex finder configurations. Minerals Engineering,63 (2014) 125–138. https://doi.org/10.1016/j.mineng.2014.02.003.

DOI: 10.1016/j.mineng.2014.02.003

[17] S. M. Gonçalves, Effect of solids concentration and operational variables on the performance of a concentrating hydrocyclone. Master Dissertation in Chemical Engineering. Federal University of Uberlândia, Brazil (2016). (In Portuguese) https://repositorio.ufu.br/bitstream/123456789/17803/1/EfeitoConcentra% C3% A7% C3% A3oSolidos.pdf. Accessed on: January 25, (2018).

[18] R.K. Dubey, E. Climent, C. Banerjee, A.K. Majumder, Performance monitoring of a hydrocyclone based on underflow discharge angle. International Journal of Mineral Processing,154 (2016) 41–52. https://doi.org/10.1016/j.minpro.2016.07.002.

DOI: 10.1016/j.minpro.2016.07.002

[19] L. Ni, J. Tian, J. Zhao, Experimental study of the effect of underflow pipe diameter on separation performance of a novel de-foulant hydrocyclone with continuous underflow and reflux function. Separation and Purification Technology, 171, (2016) 270–279. https://doi.org/10.1016/j.seppur.2016.07.047.

DOI: 10.1016/j.seppur.2016.07.047

[20] K.W. Chu, B. Wang, A. B. Yu, A. Vince, Particle scale modelling of the multiphase flow in a dense medium cyclone: Effect of vortex finder outlet pressure. Minerals Engineering, 31 (2012) 46–58. https://doi.org/10.1016/j.mineng.2011.11.011.

DOI: 10.1016/j.mineng.2011.11.011

[21] K. Kashiwaya, T. Noumachi, N. Hiroyoshi, M. Ito, M. Tsunekawa, Effect of particle shape on hydrocyclone classification. Powder Technology, 226 (2012) 147–156 https://doi.org/10.1016/j.powtec.2012.04.036.

DOI: 10.1016/j.powtec.2012.04.036

[22] S.B. Kuang, K.W. Chu, A.B. Yu, A. Vince, Numerical study of liquid–gas–solid flow in classifying hydrocyclones: Effect of feed solids concentration. Minerals Engineering, 31 (2012) 17-31 http://dx.doi.org/10.1016/j.mineng.2012.01.003.

DOI: 10.1016/j.mineng.2012.01.003

[23] S.M. Gonçalves, M. A. S. Barrozo, L. G. M. Vieira, Effects of Solids Concentration and Underflow Diameter on the Performance of a Newly Designed Hydrocyclone. Chemical Engineering and Technology, 40(10) (2017) 1750–1757. https://doi.org/10.1002/ceat.201600496.

DOI: 10.1002/ceat.201600496

[24] M. Ghadirian, R. E. Hayes, J. Mmbaga, A. Afacan, Z. Xu, On the Simulation ofHydrocyclonesusing CFD, The Canadian Journal of Chemical Engineering, 91(5), 950-958 (2012).DOI 10.1002/cjce.21705.

DOI: 10.1002/cjce.21705

[25] T.R. Vakamalla, K. S. Kumbhar, R. Gujjula, N. Mangadoddy, Computational and experimental study of the effect of inclination on hydrocyclone performance. Separation and Purification Technology, 138 (2014) 104–117. https://doi.org/10.1016/j.seppur.2014.10.013.

DOI: 10.1016/j.seppur.2014.10.013

[26] D. Winfield, M. Cross, N. Croft, D. Paddison, I. Craig, Performance comparison of a single and triple tangential inlet gas separation cyclone:A CFD Study, Powder Technology, 235 (2013) 520-531. https://doi.org/10.1016/j.powtec.2012.10.026.

DOI: 10.1016/j.powtec.2012.10.026

[27] Y.R. Murthy, K. U. Bhaskar, Parametric CFD studies on hydrocyclone. Powder Technology, 230 (2012) 36-47. https://doi.org/10.1016/j.powtec.2012.06.048.

DOI: 10.1016/j.powtec.2012.06.048

[28] Y. Xu, X. Song, Z. Sun, G. Lu, P. Li, J. Yu, Simulation analysis of multiphase flow and performance of hydrocyclones at different atmospheric pressures. Industrial and Engineering Chemistry Research, 51(1) (2012) 443–453.

DOI: 10.1021/ie201147e

[29] S. Swain, S. Mohanty, A 3-dimensional Eulerian–Eulerian CFD simulation of a hydrocyclone. Applied Mathematical Modelling, 37 (2013) 2921–2932. https://doi.org/10.1016/j.apm.2012.06.007.

DOI: 10.1016/j.apm.2012.06.007

[30] ANSYS 18.0. user guide (2018). https://ansyshelp.ansys.com/.

[31] S.A. Morsi, A.J. Alexander, An investigation of Particle Trajectories in Two-Phase Flow Systems. J. Fluid Mec., 55(2) (1972) 193-208.https://doi.org/10.1017/S0022112072001806.

DOI: 10.1017/s0022112072001806

[32] L. Svarovsky, Solid-Liquid Separation, Chemical Engineering Series, 2nd ed., Butterworths, London (1981).

[33] K. Heiskanen, Particle Classification. Chapman & Hall, London, (1993).

[34] J.T. Nascimento, Use of CFD in the Optimization of Geometric Proportions of a Hydrocyclone for Oil / Water Separation. 61 p. Final Project: School of Chemistry / Federal University of Rio de Janeiro, Rio de Janeiro, Brazil (2008) (In Portuguese).

DOI: 10.15557/jou.2017.0044

[35] L.C. Almeida, Numerical simulation of water-oil separation in hydrocyclones for low oil fractions. Final Project: School of Chemistry / Federal University of Rio de Janeiro, Rio de Janeiro, Brazil (2009). (In Portuguese).

DOI: 10.23939/chcht03.01.053

[36] P.C. Tonin, Computational optimization of hydrocyclone in pressurized irrigation. Federal University of Campina Grande, Campina Grande, Brazil, Doctoral thesis in Agricultural Engineering, (2012), 92 p. (In Portuguese).

DOI: 10.21475/ajcs.18.12.05.pne747