Electroplasticity for Sustainable Metal Forming: A Comparative Energy Assessment

Abstract:

Modern manufacturing increasingly demands energy-and resource-efficient solutions. Conventional metal forming often requires high temperatures to reduce flow stress, resulting in high energy consumption, especially for low-formability alloys. Electrically-Assisted Manufacturing (EAM) has emerged as a promising alternative, leveraging the electroplastic effect, i.e. electricity’s direct influence on plastic deformation. Documented benefits include reduced forming forces, improved ductility, and altered fracture modes. Indeed, integrating electroplasticity into manufacturing aligns with Industry 4.0 and decarbonization goals, enabling lower energy consumption, extended tool life, and greater compatibility with renewable energy sources. This study compares conventional tensile testing and electro-assisted tensile testing (EAM) of Ti6Al4V, evaluating both mechanical results and the energy consumption of the testing machine under different conditions. The comparison results highlight the potential of pulsed current to improve material formability while reducing energy consumption, offering a more sustainable approach to manufacturing.

• Periodical: Key Engineering Materials (Volume 1051)
• Pages: 1-8
• DOI: https://doi.org/10.4028/p-ZK3upW
• Online since: April 2026
• Authors: Luigi Benvenuto*, Ersilia Cozzolino, Agnese Testa, Chiara Mandolfino, Alessandro Simeone, Enrico Lertora, Luca Settineri, Antonello Astarita
• Keywords: Electroplasticity, Energy Consumption, Tensile Test, Titanium Alloy

References

[1] X. Li, B. Ji, Q. Zhou, J. Chen, and P. Gao, 'Influence of Grain Size on Electrically Assisted Tensile Behavior of Ti-6Al-4V Alloy', J Mater Eng Perform, vol. 25, no. 10, p.4514–4520, Oct. 2016.

DOI: 10.1007/s11665-016-2268-0

[2] B. Kinsey, G. Cullen, A. Jordan, and S. Mates, 'Investigation of electroplastic effect at high deformation rates for 304SS and Ti-6Al-4V', CIRP Ann Manuf Technol, vol. 62, no. 1, p.279–282, 2013.

DOI: 10.1016/j.cirp.2013.03.058

[3] T. A. Perkins, T. J. Kronenberger, and J. T. Roth, 'Metallic forging using electrical flow as an alternative to warm/hot working', J Manuf Sci Eng, vol. 129, no. 1, p.84–94, 2007.

DOI: 10.1115/1.2386164

[4] V. Stolyarov and A. Misochenko, 'A Pulsed Current Application to the Deformation Processing of Materials', Sep. 01, 2023, Multidisciplinary Digital Publishing Institute (MDPI).

DOI: 10.3390/ma16186270

[5] O. A. Troitskii, 'The electroplastic effect in metals', no. 2, p.103–106, 1984.

[6] H. Conrad, 'Electroplasticity in metals and ceramics', Materials Science and Engineering, vol. 287, 2000.

[7] B. J. Ruszkiewicz, T. Grimm, I. Ragai, L. Mears, and J. T. Roth, 'A Review of Electrically-Assisted Manufacturing with Emphasis on Modeling and Understanding of the Electroplastic Effect', Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 139, no. 11, Nov. 2017.

DOI: 10.1115/1.4036716

[8] J. Magargee, R. Fan, and J. Cao, 'Analysis and observations of current density sensitivity and thermally activated mechanical behavior in electrically-assisted deformation', J Manuf Sci Eng, vol. 135, no. 6, 2013.

DOI: 10.1115/1.4025882

[9] J. Magargee, F. Morestin, and J. Cao, 'Characterization of flow stress for commercially pure titanium subjected to electrically assisted deformation', J Eng Mater Technol, vol. 135, no. 4, 2013.

DOI: 10.1115/1.4024394

[10] M. J. Kim et al., 'Electric current-induced annealing during uniaxial tension of aluminum alloy', Scr Mater, vol. 75, p.58–61, Mar. 2014.

DOI: 10.1016/j.scriptamat.2013.11.019

[11] S. T. Hong, Y. H. Jeong, M. N. Chowdhury, D. M. Chun, M. J. Kim, and H. N. Han, 'Feasibility of electrically assisted progressive forging of aluminum 6061-T6 alloy', CIRP Ann Manuf Technol, vol. 64, no. 1, p.277–280, 2015.

DOI: 10.1016/j.cirp.2015.04.084

[12] S. Zhao et al., 'Defect reconfiguration in a Ti–Al alloy via electroplasticity', Nat Mater, vol. 20, no. 4, p.468–472, Apr. 2021.

DOI: 10.1038/s41563-020-00817-z

[13] G. Ingarao, O. Zaheer, and L. Fratini, 'Manufacturing processes as material and energy efficiency strategies enablers: The case of Single Point Incremental Forming to reshape end-of-life metal components', CIRP J Manuf Sci Technol, vol. 32, p.145–153, Jan. 2021.

DOI: 10.1016/j.cirpj.2020.12.003

[14] F. Liu, Y. Li, S. Ghafoor, Z. Cheng, F. Li, and J. Li, 'Sustainability assessment of incremental sheet forming: a review', Mar. 01, 2022, Springer Science and Business Media Deutschland GmbH.

DOI: 10.1007/s00170-021-08368-6

[15] A. Ghiotti, S. Bruschi, E. Simonetto, C. Gennari, I. Calliari, and P. Bariani, 'Electroplastic effect on AA1050 aluminium alloy formability', CIRP Annals, vol. 67, no. 1, p.289–292, Jan. 2018.

DOI: 10.1016/j.cirp.2018.04.054

[16] EN ISO 6892-1, 'Metallic materials - Tensile testing. Part 1: Method of test at room temperature', 2019, British Standards Institution.

[17] Y. Yang, R. Qin, Y. Dong, J. Wang, and C. Ye, 'Crystal plasticity modeling of electropulsing induced plasticity in metals', Int J Plast, vol. 171, p.103828, Dec. 2023.

DOI: 10.1016/J.IJPLAS.2023.103828