Simulation on the Biomass Direct-Fired Stirling Engine

Xu Zhang; Yan Ma; Jie Zang; Tie Chen; Jing Yin; Peng Zhang

doi:10.4028/www.scientific.net/KEM.450.55

Paper Titles

Design of Protective Device against Welding Arc and Smoke
p.39

Study on Conveyor AMESim Model and Motor Starting Interval
p.43

A Dynamic Positioning Method for Single Point Mooring System of a Catamaran
p.47

Numerical Analysis of Shock Responses for a Marine Gearbox System
p.51

Simulation on the Biomass Direct-Fired Stirling Engine
p.55

Research on Tool Flow Deadlock Based on Petri Net and Graph Theory
p.59

Viscosity Influence Research on Load Capacity of Heavy Hydrostatic Bearing
p.63

Study on Bolted Joints of U Frame of Simulation Turntable
p.67

Power Transmission of Two Coupled Rectangular Plates with Elastically Restrained Coupling Edge
p.71

HomeKey Engineering MaterialsKey Engineering Materials Vol. 450Simulation on the Biomass Direct-Fired Stirling...

Simulation on the Biomass Direct-Fired Stirling Engine

Abstract:

The theoretical analysis of the working principle of the β-type Stirling engine was carried out. According to the constraints of their mathematical model, an analysis was made through the MATLAB/Simulink simulation software, and the simulated curves are generated under the different parameters which were used to compare and research. The results show that the output power and the pressure of the cylinder change with the different pressure, temperature, swept volume and the cylinder volume, and which reflect the influencing factors of the power. The simulation gives an intuitive theoretical basis for the design and optimization of the direct-fired biomass Stirling engine, and points out the direction of the development of the biomass energy in the new period.