Fatigue Crack Growth Rate under Different Bending to Torsion Ratios in 10HNAP Steel

Abstract:

Article Preview

The paper contains the fatigue test results of rectangular cross-section specimens made of 10HNAP steel. The specimen height to width ratio was 1.5. Bending with torsion tests were carried out for the following ratios of bending to torsional moments MaB / MaT = 0.47, 0.94, 1.87 and the loading frequency 26.5 Hz. The tests were performed in a high cycle fatigue regime for the stress ratio R = - 1 and phase shift between bending and torsion loading equal to  = 0.

Info:

Periodical:

Edited by:

Pavel Šandera

Pages:

187-190

DOI:

10.4028/www.scientific.net/KEM.465.187

Citation:

Z. Marciniak and D. Rozumek, "Fatigue Crack Growth Rate under Different Bending to Torsion Ratios in 10HNAP Steel", Key Engineering Materials, Vol. 465, pp. 187-190, 2011

Online since:

January 2011

Export:

Price:

$35.00

In order to see related information, you need to Login.

In order to see related information, you need to Login.