Flexible Tooling System Using Reconfigurable Multi-Point Thermoforming Technology for Manufacturing Freeform Panels

Abstract:

In this paper, authors present a highly flexible tooling system based on reconfigurable multi-point thermoforming (MPTF) methodology, which has been developed within an EU-granted FP7 project. The MPTF technology employs an actuated-punch matrix to dynamically configure a controllable tool working surface through digitally adjusting relative displacement of each punch in the matrix. Novel MPTF methods have been proposed through re-changing configurations of actuated-punch tooling system according to rapid thermoforming principles and relevant cladding applications. The tooling system includes an industrial-scale prototype of an MPTF tooling integrated with functional CAD/CAE/CAT software interfaces. The numerical simulation with an explicit FEM predicts the unexpected deformation defects of dimples and wrinkles regarding to discrete contact boundaries between punches and the sheet blank. Innovative techniques of variable blank-holder and deformable cushion have been implemented to suppress wrinkling and eliminate dimpling effectively. The tooling system has been successfully applied to manufacture complex double-curved panels, which are described as application examples. Compared with conventional fixed moulds, the flexible tooling offers robust, rapid and re-changeable means to make mould-less manufacturing large freeform panels.

• Periodical: Key Engineering Materials (Volumes 504-506)
• Pages: 839-844
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.504-506.839
• Online since: February 2012
• Authors: S.Z. Su, M.Z. Li, C.G. Liu, C.Q. Ji, R. Setchi, J. Larkiola, I. Panteleev, I. Stead, R. Lopez
• Keywords: CAD/CAM Software, Multi-Point Forming, Numerical Simulation, Reconfigurable Tooling, Thermoplastic Thermoforming

References

[1] D. F. Walczyk, J. Lakshmikanthan and D. R. Kirk, Development of a reconfigurable tool for forming aircraft body panels. J. Manuf. Syst. 17(4) (1998) 287-296.

DOI: 10.1016/s0278-6125(98)80076-9

[2] D. E. Hardt, W. A. Norfleet, V. M. Valentin, and A. Parris. , In process control of strain in a stretch forming process. J. Eng. Mater. Tech. 123(4) (2001) 496-503.

DOI: 10.1115/1.1397780

[3] M. Li, Y. Liu and S. Su, Multi-point forming: a flexible manufacturing method for a 3-D surface sheet. J. Mater. Proc. Tech. 87 (1999) 277-280.

[4] Z. Y. Cai and M. Z. Li, Multi-point forming of three-dimensional sheet metal and the control of the forming process, Int. J. Press. Vess. Pip. 79(4) (2002) 289-296.

DOI: 10.1016/s0308-0161(02)00017-0

[5] D. T. Pham, S. Z. Su and M. Li, An integrated manufacturing system with reconfigurable multi-point forming technology for fabrication of complex cladding and facades, Adv. Mater. Res., 243-249 (2011) 3507-3512.

DOI: 10.4028/www.scientific.net/amr.243-249.3507