Experimental Research on Granule Moisture Measurement by Microwave Resonance Technology in a Fluidized Bed Dryer

Abstract:

Drying is one of the most important methods for industrial processing while the granule moisture is a critical quality attribute (CQA) which has a significant influence on the finished product quality. In-line measurement of granule moisture during fluidized bed drying is getting more imperative to meet more stringent product quality specifications. Nowadays, several methods have been applied to measuring the granule moisture in-line. Comparing to other methods, microwave resonance (MR) technology provides more representative results due to its independency of both the particle density and the bed density. In the current study, one MR sensor was mounted onto an industrial fluidized bed dryer to monitor the real-time moisture of granules. The drying experiments were performed at different drying air temperatures and flow rates. The comparison between the results of in-line and off-line granule moisture measurements, namely MR technology and loss on drying caused by infrared light (LOD/IR), was presented. Furthermore, the influences of inlet air temperature and flow rate on the performance of the MR sensor were investigated. As a conclusion, the MR method, which is independent of the drying air temperature and flow rate, provided more accurate results when the granule moisture was below 25% (wet basis). Therefore, it is a promising method to be applied in real-time measurement of the granule moisture and predict the end-point in fluidized bed drying processes as well.

• Periodical: Key Engineering Materials (Volume 544)
• Pages: 466-470
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.544.466
• Online since: March 2013
• Authors: Yun Hui Xie, Lan Chen, Chun Hua Lin, Song Du
• Keywords: Fluidized Bed Dryer, Granule Moisture, In-Line Moisture Measurement, Microwave Resonance Technology

References

[1] S.T.F. Mortier, T. De Beer, K.V. Gernaey, Mechanistic modelling of fluidized bed drying processes of wet porous granules: A review, European Journal of Pharmaceutics and Biopharmaceutics. 79 (2011) 205-225.

DOI: 10.1016/j.ejpb.2011.05.013

[2] C. Buschmüller, W. Wiedey, C. Döscher, In-line monitoring of granule moisture in fluidized-bed dryers using microwave resonance technology, European Journal of Pharmaceutics and Biopharmaceutics. 69 (2008) 380-387.

DOI: 10.1016/j.ejpb.2007.09.014

[3] F. Portoghese, F. Berruti, C. Briens, Continuous on-line measurement of solid moisture content during fluidized bed drying using triboelectric probes, Powder Technology. 181 (2008) 169-177.

DOI: 10.1016/j.powtec.2007.01.003

[4] H.G. Wang, P.R. Senior, R. Mann, Online measurement and control of solids moisture in fluidised bed dryers, Chemical Engineering Science. 64 (12) (2009) 2893-2902.

DOI: 10.1016/j.ces.2009.03.014

[5] T. De Beer, A. Burggraeve, M. Fonteyne, Near infrared and Raman spectroscopy for the in-process monitoring of pharmaceutical production processes, International Journal of Pharmaceutics, 417 (2011) 32-47.

DOI: 10.1016/j.ijpharm.2010.12.012

[6] F. J. S. Nieuwmeyer, M. Damen, A. Gerich, Granule characterization during fluid bed drying by development of a near infrared method to determine water content and median granule size, Pharmaceutical Research. 24 (2007) 1854-1861.

DOI: 10.1007/s11095-007-9305-5

[7] J. Mantanus, E. Ziémons, P. Lebrun, Moisture content determination of pharmaceutical pellets by near infrared spectroscopy: Method development and validation, Analytica Chimica Acta. 642 (2009) 186-192.

DOI: 10.1016/j.aca.2008.12.031

[8] A. Miwa, T. Yajima, H. Ikuta, Prediction of suitable amounts of water in fluidized bed granulation of pharmaceutical formulations using corresponding values of components, International Journal of Pharmaceutics. 352 (2008) 202-208.

DOI: 10.1016/j.ijpharm.2007.10.044

[9] F. Portoghese, F. Berruti, C. Briens, Use of triboelectric probes for on-line monitoring of liquid concentration in wet gas–solid fluidized beds, Chemical Engineering Science. 60 (22) (2005) 6043-6048.

DOI: 10.1016/j.ces.2005.03.042

[10] V. Rimpiläinen, L.M. Heikkinen, M. Vauhkonen, Moisture distribution and hydrodynamics of wet granules during fluidized-bed drying characterized with volumetric electrical capacitance tomography, Chemical Engineering Science. 75 (2012) 220-234.

DOI: 10.1016/j.ces.2012.03.028

[11] C.C. Corredor, D. Bu, D. Both, Comparison of near infrared and microwave resonance sensors for at-line moisture determination in powders and tablets, Analytica Chimica Acta. 696 (2011) 84-93.

DOI: 10.1016/j.aca.2011.03.048

[12] J. Luypaert, D.L. Massart, Y. Vander Heyden, Near-infrared spectroscopy applications in pharmaceutical analysis, Ta lanta. 72 (3) (2007) 865-883.

DOI: 10.1016/j.talanta.2006.12.023

[13] V. Lourenço, T. Herdling, G. Reich, Combining microwave resonance technology to multivariate data analysis as a novel PAT tool to improve process understanding in fluid bed granulation, European Journal of Pharmaceutics and Biopharmaceutics. 78 (3) (2011).

DOI: 10.1016/j.ejpb.2011.02.008