Fabrication of Carbon Nanofiber and Silicon Carbonitride Ceramic Nanomposites by In Situ Growth during Ceramic Formation

Abstract:

Carbon nanofiber (CNF) and silicon carbonitride (SiCN) ceramic nanocomposites (SiCN/CNF) are fabricated by in-situ growth of CNFs in SiCN ceramics during ceramic transformation of polymeric precursors of polysilazanes (PSZ). Metal catalyst precursors are mixed into the polysilazane liquid forming metal particles from decomposition under heating during the pyrolysis. At certain temperatures, ethylene was introduced as a carbon source to induce the growth of CNFs over the metal particles in the ceramic body followed by heating to higher temperatures to complete the pyrolysis. In this way, bulk nanocomposites of SiCN/CNF are obtained as crack-free bodies although some pores are left in the sample. Scanning electron microscopy (SEM) analysis performed on the cross-section of nanocomposites revealed the distribution of needle-like nanofibers of diameter ~ 200 nm and exposed length of ~ 2 μm. The CNFs exhibited the unique multiscale nanostructure in micron hollow tubes with branched nanofiber walls. Energy dispersive X-ray spectrometer (EDX) detected carbon as the major element from the nanofibers confirming the formation of carbon nanofibers. Moreover, clusters of nanoparticles are formed on the ceramic surface from carbon depositions. The in-situ growth of CNFs in SiCN ceramics provides a one-step process potentially to be developed for fabrication of structural and functional SiCN/CNF nanocomposites.

• Periodical: Key Engineering Materials (Volumes 602-603)
• Pages: 221-225
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.602-603.221
• Online since: March 2014
• Authors: Meng Ying Liu, Ya Li Li*, Sheng Xiang Qu, Shuai Shuai Han, Si Hui Wang
• Keywords: Carbon Nanofibers, Ceramics Matrix Composite, In Situ Growth, Multiscale Structure

References

[1] P. Colombo. Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics, J. Am. Ceram. Soc. 93 (7) (2010) 1805–1837.

[2] L. An, R. Riedel, C. Konetachny et al. Newtonian viscosity of amorphous silicon carbonitride at high temperature, J. Am. Ceram. Soc. 81(5) (1998) 1349–1352.

[3] S. R. Shah, R. Raj. Mechanical properties of a fully dense polymer derived ceramic made by a novel pressure casting process, Acta Mater. 50(16) (2002) 4093–410.

DOI: 10.1016/s1359-6454(02)00206-9

[4] E. Hammel, X. Tang, M. Trampert et al. Carbon nanofibers for composite applications, Carbon 42 (2004) 1153–1158.

DOI: 10.1016/j.carbon.2003.12.043

[5] A. Krishnan, E. Dujardin, M. M. J. Treacy et al. Graphitic cones and the nucleation of curved carbon surfaces, Nature 388(6641) (1997) 451-454.

DOI: 10.1038/41284

[6] H.B. Du, Y.L. Li, F.Q. Zhou et al. One-step fabrication of ceramic and carbon nanotube (CNT) composites by in situ growth of CNTs, J. Am. Ceram. Soc. 93.

DOI: 10.1111/j.1551-2916.2009.03598.x

[5] (2010) 1290–1296.

[7] S. Schmidt, S. Beyer, H. Knabe et al. Advanced ceramic matrix composite materials for current and future propulsion technology applications, Acta Astronautica 55 (2004) 409–420.

DOI: 10.1016/j.actaastro.2004.05.052

[8] K. Hirota, Y. Takaura, M. Kato et al. Fabrication of carbon nanofibre (CNF)-dispersed Al2O3 composites by pulsed electric-current pressure sintering and their mechanical and electrical properties, J. Mater. Sci. 42 (2007) 4792–4800.

DOI: 10.1007/s10853-006-0830-0

[9] Z.Q. Shi, W.L. Yang, J.P. Wang et al. Effect of interfacial structure on the thermal conductivity of carbon nanofibers reinforced aluminum nitride composites, Ceramics International 39 (2013) 3365–3370.

DOI: 10.1016/j.ceramint.2012.08.014

[10] S. Maensiri, P. Laokul, J. Klinkaewnarong et al. Carbon nanofiber reinforced alumina nanocomposites: Fabrication and mechanical properties, Materials Science and Engineering A 447 (2007) 44–50.

DOI: 10.1016/j.msea.2006.08.009

[11] A. Borrell1, V.G. Rocha2, R. Torrecillas et al. Effect of carbon nanofibers content on thermal properties of ceramic nanocomposites, Journal of Composite Materials 46(10) (2012) 1229–1234.

DOI: 10.1177/0021998311416528

[12] K. Hirota , H. Hara, and M. Kato. Mechanical properties of simultaneously synthesized and consolidated carbon nanofiber (CNF)-dispersed SiC composites by pulsed electric-current pressure sintering, Materials Science and Engineering A 458(2007).

DOI: 10.1016/j.msea.2006.12.065