p.196
p.201
p.208
p.218
p.225
p.232
p.238
p.244
p.250
Tribological Properties of Nano-MMT/In Lubricant Additive on 45#Steel Tribo-Pair
Abstract:
1:1 MMT/In composite nanopowders were prepared by nanoMMT and nanoIn modified with coupling agent KH550, and the nano-MMT/In lubricating oil dispersion system was prepared by 150N base opl containing 3 mass fraction of nano-MMT/In composite powders, and then took the dispersion effect by laser particle size analyzer ,TEM and IR. The anti-wear and friction-reducing behaviors of that lubricating oil dispersion system were observed on the MMU-10G abrasive-wear tester with 45#steel tribo-pair, the morphology and the element of the worn surfaces were analyzed by SEM and EDX. The results showed that the grain size of the modified nano-MMT/In was smaller than the one without modification, and the modified nano-MMT/In had the good dispersion in the system; compare with the one in base oil system, the average friction coefficient of sample of 45#steel tribo-pair in nano-MMT/In additive lubricating oil system had declined by 27.5%, and the total wear mass loss had declined by 63%; The surface of sample after friction had created the self-repairing film that contain the characteristic element of MMT and In, that phenomenon was caused by the interaction of nano-MMT and nano-In.
Info:
Periodical:
Pages:
225-231
Citation:
Online since:
April 2014
Authors:
Keywords:
Price:
Сopyright:
© 2014 Trans Tech Publications Ltd. All Rights Reserved
Share:
Citation: