Thermomechanical Effects in PVTα Measurements

Abstract:

Knowledge of the different properties of thermoset composite materials is of great importance for the manufacturing of high quality composite parts. The resin bulk modulus is one of them and is essential to define the composite parts compressive behaviour under uniform compression. The evolution of this property with temperature and conversion degree of reaction is a challenging task and has been tentatively measured with a home-made apparatus, named PVTα, on which temperature, volume change and degree of cure are simultaneously recorded. But as the sample is contained in a non-reactive and deformable capsule, which mechanical behaviour may interfere with the measurement, a validation is required. The aim of this work is to develop a finite element model of the problem in order to simulate the thermal mechanical behaviour of the sample and the capsule, and so to validate the measurement process. The multiphysical numerical model accounts for phase change kinetics and non-linear thermal properties as well as thermo-dependent elastic properties, all problems being solved through a strong iterative coupling scheme. Mechanical contact problems between the capsule and the resin sample are handled through a penalization method contact algorithm which enables to capture the effects of chemical and thermal shrinkage in the sample and the capsule. The heterogeneous stress state generated by the material transformation is assumed to induce heterogeneous strain states which may lead to misinterpretations of macroscopic measurements. This model is a first approach and will be improved using a more sophisticated rheological model. Nevertheless, results show that the usual experimental analysis method can be used as long as the gel point is not reached. After a certain conversion degree, the measured bulk modulus is different from the effective one so corrections have to be brought.

• Periodical: Key Engineering Materials (Volumes 611-612)
• Pages: 1584-1591
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.611-612.1584
• Online since: May 2014
• Authors: Mael Peron*, Vincent Sobotka, Nicolas Boyard, Steven Le Corre
• Keywords: Bulk Modulus, Finite Element Analysis (FEA), Resin Characterization, Thermomechanical Analysis

References

[1] A. M. Lindrose, Ultrasonic Wave and Moduli Changes in a Curing Epoxy Resin, Exp. Mech., vol. 18, no. 6, p.227–232, (1978).

DOI: 10.1007/bf02328418

[2] S. Dixon, D. Jaques, C. Edwards, and S. B. Palmer, The Development of Shear and Compression Elastic Moduli in Curing Epoxy Adhesives Measured Using Non-Contact Ultrasonic Transducers, Rev. Quant. Nondestruct. Eval., vol. 22, p.1049–1055, (2003).

DOI: 10.1063/1.1570249

[3] D. G. Yang, K. M. B. Jansen, L. J. Ernst, G. Q. Zhang, H. J. L. Bressers, and J. H. J. Janssen, Effect of filler concentration of rubbery shear and bulk modulus of molding compounds, Microelectron. Reliab., vol. 47, p.233–239, (2007).

DOI: 10.1016/j.microrel.2006.09.031

[4] Y. Meng, P. Bernazzani, P. A. O'Connell, G. B. McKenna, and S. L. Simon, A new pressurizable dilatometer for measuring the time-dependent bulk modulus and pressure-volume-temperature properties of polymeric materials, Rev. Sci. Instrum., vol. 80, (2009).

DOI: 10.1063/1.3122964

[5] Y. Nawab, P. Casari, N. Boyard, and F. Jacquemin, Characterization of the cure shrinkage , reaction kinetics , bulk modulus and thermal conductivity of thermoset resin from a single experiment, J. Mater. Sci., vol. 48, p.2394–2403, (2013).

DOI: 10.1007/s10853-012-7026-6

[6] N. Boyard, M. Vayer, C. Sinturel, R. Erre, and D. Delaunay, Analysis and Modeling of PVTX Diagram of an Unsaturated Polyester Resin , Thermoplastic Additive , and Mineral Fillers Blend, J. Appl. Polym. Sci., vol. 88, p.1258–1267, (2003).

DOI: 10.1002/app.11830

[7] H. Massé, E. Arquis, D. Delaunay, S. Quilliet, and P. Le Bot, Heat transfer with mechanically driven thermal contact resistance at the polymer – mold interface in injection molding of polymers, Int. J. Heat Mass Transf., vol. 47, no. 8–9, p.2015–2027, (2004).

DOI: 10.1016/j.ijheatmasstransfer.2002.04.001

[8] J. Beck, B. Blackwell, and C. Clair, Inverse heat conduction, Wiley. New York, (1985).

[9] Y. Nawab, Characterization and modelling of cure dependent properties of thermoset composites - Application to the simulation of residual stresses, Université de Nantes, (2012).

[10] F. Hecht, New development in FreeFem++, J. Numer. Math., vol. 20, no. 3–4, p.251–265, (2012).

[11] J. -L. Bailleul, Optimisation du cycle de cuisson des pièces épaisses en matériau composite. Application à un préimprégné résine époxyde/fibres de verre - PhD Thesis, Université de Nantes, (1997).

[12] G. Zavarise and L. De Lorenzis, The node-to-segment algorithm for 2D frictionless contact : Classical formulation and special cases, Comput. Methods Appl. Mech. Eng., vol. 198, no. 41–44, p.3428–3451, (2009).

DOI: 10.1016/j.cma.2009.06.022