Effective Linear Friction Welding Machine Redesign through Process Analysis

Abstract:

Linear friction welding is a solid-state joining process developed for non-axisymmetric components in which the joining of the specimens is obtained through reciprocating motion and pressure. In the process, the friction forces work due to the high frequency oscillation and the pressure between the specimens is converted in thermal energy. In order to design an effective machine, relevant issues derive from the high frequency and the large inertial forces involved in the process. In this study, the authors describe the redesign of a preexisting prototypal machine for LFW processes. A machine redesign is needed when welding high resistant materials, i.e. steels or titanium alloys, with high frequencies, up to 72 Hz. The sensors equipping the machine allows in process measurements of key process variables as temperatures of the specimens, tangential forces, accelerations and speeds. At the same time through the acquired data, the main weaknesses of the machine can be highlighted allowing for effective redesign.

• Periodical: Key Engineering Materials (Volumes 622-623)
• Pages: 484-491
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.622-623.484
• Online since: September 2014
• Authors: Gianluca Buffa*, Marco Cammalleri, Davide Campanella, Livan Fratini, Achilles Vairis
• Keywords: Desmodromic System, Linear Friction Welding, Machine Design

References

[1] A. W. E. Nentwig, Untersuchungen zum Linear-reibsscheissen von Metallen, Schweissen und Schneiden, 47 (8) (1995) 648-653.

[2] V. I. Vill, Friction welding of metals, Am. Weld. Soc. -New York, (1965).

[3] B. Crossland, Friction Welding, sl: Contemp. Phy., 12 (1971), 559-574.

[4] A. Vairis, M. Frost, High frequency linear friction welding of a titanium alloy, J. Wear 217 (1998) 117-131.

DOI: 10.1016/s0043-1648(98)00145-8

[5] A. Vairis, M. Frost, Designing experiments to study welding processes: using the Taguchi method, Mater. Sci. Eng. A271 (1999) 477.

[6] M. Frost, A. Vairis, On the extrusion stage of linear friction welding of Ti6Al4V. sl: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., (1999).

[7] A. Vairis , M. Frost, Modelling the linear friction welding of titanium blocks, Mat. Sci. Eng. A292 (2000) 8–17.

[8] L. Fratini, G. Buffa, M. Cammalleri, D. Campanella, On the linear friction welding process of aluminum alloys: Experimental insights through process monitoring, CIRP Annals – Manuf. Technol. 62 (2013) 295–298.

DOI: 10.1016/j.cirp.2013.03.056

[9] D. Moreno, E. Mucchi, G. Dalpiaz, A. Rivola, Multibody analysis of the desmodromic valve train of the Ducati motogp engine, J. Multibody Dyn., Eccomas Thematic Conference, (2007).

[10] L. Fratini. G. Buffa, D. Campanella, D. La Spisa, Investigations on the linear friction welding process through numerical simulations and experiments, Mater. Design. 40 (2012) 285–291.

DOI: 10.1016/j.matdes.2012.03.058