Evolution from High Strength Concrete to High Performance Concrete

Abstract:

High strength concrete for the production of concrete railway sleepers was designed more than 20 years ago. The compressive strength of the concrete was very high from the start, but flexure strengths showed some irregular development - a decrease in time. Later, also a significant decrease of fracture properties was recorded. Microcracking was found to be the reason for this; therefore some modifications were performed to avoid this happening (especially the reduction of the maximum size of aggregates from 22 mm to 16 mm or 11 mm). Some problems concerning frost resistance of the concrete with a slag addition were reduced by applying ternary binders. All of the results are discussed from the point of view of a long-term observation of the strengths and fracture properties ́ development during the time period of 5 years or even more.

• Periodical: Key Engineering Materials (Volumes 629-630)
• Pages: 49-54
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.629-630.49
• Online since: October 2014
• Authors: Vlastimil Bilek*, Vladimíra Tomalová, Petr Hájek, Ctislav Fiala
• Keywords: Durability, Fracture Work, Microcracking, Shrinkage

References

[1] J. Pawluk: Corrosion hazards of railway sleepers, part 1, Cement, Wapno, Beton, 3/2014, pp.174-184, ISSN-1425-8129.

[2] M. Collepardi: The New Concrete, ENCO s. r. l., (2006).

[3] B.L. Karihaloo, P. Nallathambi: An improved effective crack model for determination of fracture toughness of concrete, Cem. Concr. Res., Vol. 19, pp.603-610.

DOI: 10.1016/0008-8846(89)90012-4

[4] RILEM TC-50 FMC (Reccommendation) Determination of fracture energy of mortar and concrete by means of three-point bend test on notched beams, Mater. Struct. Vol. 18 (107), 1985, pp.285-290.

DOI: 10.1201/9781482271362-58

[5] M. Elices, G.V. Guinea, J. Planas: On the measurement of concrete fracture energy using three-point bend test, Mater. Struct., Vol. 30 (1997), pp.375-376.

DOI: 10.1007/bf02480689

[6] V. Bilek: Theory of fracture strength of composites with cement content, PhD thesis, Brno University of Technology, 1999 (in Czech).

[7] V. Bilek: Investigation of long-term mechanical properties of High Strength Concrete, Proc. of 6th CANMET/ACI Int. Conf. on Durability of Concrete, Supplementary papers, Thessaloniki, Greece, 2003, pp.211-223.

[8] V. Bilek, H. Sklorzova: Influence of metakaoline on the enhancing frost resistance of concrete, Workshop Metakaolin 2009, P. Rovnaníkova ed., BUT Brno (in Czech).

[9] P. -C. Aïtcin: High Performance Concrete, Spon Press, (1995).

[10] V. Bilek: Development and properties of concretes with ternary binders, Cement, Wapno, Beton, 6/2013, pp.343-352, ISSN-1425-8129.

[11] M. Thomas: The effect of supplementary cementing materials on alkali-silica reaction: A review. Cem. and Concr. Res. 2011, no. 41, p.1224–1231.

DOI: 10.1016/j.cemconres.2010.11.003

[12] Z. Pertold, S. Sachlova, A. Stastna, V. Bilek jr., K. Krutilova, V. Bilek sr., L. Topolar: Alkali-silica reaction in the Czech Republic and possibilities of its elimination, Beton TKS, 2/2014, pp.34-41, ISSN 12133116 (in Czech).