Insulating Materials for Energy Saving in Buildings

Abstract:

Insulation is considered one of the effective solutions to achieve energy savings in buidings. Better insulation having low thermal conductivity contributes significantly to new construction and retrofitting existing buildings. The Energy Conservation Building Code and National Building Code of India define the prescriptive and mandatory requirements for the U-factor and R-values for different climates but the way to achieve these values is left to the designers. As none of the walling and roofing assemblies in buildings fulfill the criteria for overall thermal transmittance, the study deals with determining the thermal conductivity of sustainable walling materials and prefab roofing technologies as well as insulating materials using Guarded Hot-Plate Apparatus. The MATLAB program is developed for computing the U-values and for predicting the desired retrofit insulation thicknesses to make different materials and roofing assembly combinations comply the Code requirements in different climatic regions of India. The results of the study are used for computing the performance with and without insulation using DesgnBuilder software for improving energy efficinecy of the buildings in composite climate in India.

• Periodical: Key Engineering Materials (Volume 632)
• Pages: 1-14
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.632.1
• Online since: November 2014
• Authors: Ashok Kumar*, Rajesh Deoliya, P.S. Chani
• Keywords: ECBC, Insulation, NbC, Roofing Technologies MATLAB Program, R-Value, Simulation, Thermal Performance, Thickness, U-Factor, Walling Materials

References

[1] Daniel Castro-Lacouture, Jorge A. Sefair, Laura Florez, Andres L. Medaglia: Optimization model for the selection of materials using a LEED – based green building rating system in Colombia. Building and Environment 44 (2009) 1162-1170.

DOI: 10.1016/j.buildenv.2008.08.009

[2] R.M. Pulselli, E. Simoncini, F.M. Pulselli, S. Bastianoni: Emergy analysis of building manufacturing, maintenance and use: Em-building indices to evaluate housing sustainability. Energy and Buildings 39 /5 (2007) 620-628.

DOI: 10.1016/j.enbuild.2006.10.004

[3] Kemal Comaki, Bedri Yuksel: Environmental impact of thermal insulation thickness in buildings. Applied Thermal Engineering 24 (2004) 933-940.

DOI: 10.1016/j.applthermaleng.2003.10.020

[4] I. Dincer, M.A. Rosen: Energy environment and sustainable development. Applied Energy 64 (1999) 427-440.

DOI: 10.1016/s0306-2619(99)00111-7

[5] I. Dincer: Environmental impacts of energy. Energy Policy 27 (1999) 845 - 854.

DOI: 10.1016/s0301-4215(99)00068-3

[6] Xing Jin, Xiaosong Zhang, Yiran Cao, Geng Wang: Thermal performance evaluation of the wall using heat flux time lag and decrement factor. Energy and Buildings 47 (2012) 369-374.

DOI: 10.1016/j.enbuild.2011.12.010

[7] Ashok Kumar, B.M. Suman: Experimental evaluation of insulation materials for walls and roofs and their impact on indoor thermal comfort under composite climate. Building and Environment 59 (2013) 635-643.

DOI: 10.1016/j.buildenv.2012.09.023

[8] Recep Yumrutaşa, Mazhar Ünsalb, Mehmet Kanoğlua: Periodic solution of transient heat flow through multilayer walls and flat roofs by complex finite Fourier transform technique. Building and Environment 40 (2005) 1117-1125.

DOI: 10.1016/j.buildenv.2004.09.005

[9] ASHRAE Handbook – Fundamentals, Atlanta (2009).

[10] Nuri Sisman, Emin Kahya, Nil Aras, Haydar Aras: Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey's different degree – day regions. Energy Policy 35 (2007) 5151 - 5155.

DOI: 10.1016/j.enpol.2007.04.037

[11] Kemal Comaki, Bedri Yuksel: Optimum insulation thicknesses of external walls for energy savings. Applied Thermal Engineering 23(2003) 473-479.

DOI: 10.1016/s1359-4311(02)00209-0

[12] M.S. Mohsen, B.A. Akash: Some prospect of energy savings in buildings. Energy Conversion and Management 42 (2001) 1307 – 1315.

DOI: 10.1016/s0196-8904(00)00140-0

[13] Lu Aye, W.W.S. Charters, A.M. Fandino and J.R.W. Robinson: Thermal Performance of Sustainable Energy Features. Solar, (2005), 1-10.

[14] John Straube: High R-Value Enclosures for High Performance Residential Buildings in All Climate Zones. Building America Special Research Project. building science. com, Research Report -1005, (2011).

[15] Afif Hasan. Optimizing insulation thicknesses for buildings using life cycle cost. Applied Energy 63 (1999) 115-124.

DOI: 10.1016/s0306-2619(99)00023-9

[16] T.M.I. Mahila, et al. Correlation between thermal conductivity and the thicknesses of selected insulation materials for building wall. Energy and Buildings 39 (2007) 182- 187.

DOI: 10.1016/j.enbuild.2006.06.002

[17] Ali Bolatturk. Optimum insulation thicknesses for building walls with respect to cooling and heating degree – hours in the warmest zone of Turkey. Building and Environment 43 (2008) 1055-1064.

DOI: 10.1016/j.buildenv.2007.02.014

[18] Mohammad S. Al-Homoud: Performance characteristics and practical applications of common building thermal insulation materials. Building and Environment 40 (2005) 353-366.

DOI: 10.1016/j.buildenv.2004.05.013

[19] S.A. Al. Sanea M.F. Zedan: Optimum insulation thickness for building walls in a hot –dry climate. International Journal of Ambient Energy 3/23 (2002) 115-126.

DOI: 10.1080/01430750.2002.9674880

[20] Ö. Altan DombaycI, Mustafa Gölcü and Yasar Pancar: Optimization of insulation thickness for external walls using different energy – sources. Applied Energy 83 (2006) 921-928.

DOI: 10.1016/j.apenergy.2005.10.006

[21] Ashok Kumar, P.S. Chani, Rajesh Deoliya: Comparative assessment of energy requirements and carbon footprint for different types of building materials and construction techniques. Conference Proceedings, CSIR- CBRI, (2012) 63-71.

[22] Energy Conservation Building Code (ECBC) of India, BEE, (2008).

[23] National building Code of India, Chapter 11, Approach to Sustainability (Draft), Bureau of Indian Standards (BIS), (2014).

[24] Method for the determination of thermal conductivity of thermal insulating materials IS: 3346-1980 (1980).

[25] Handbook on Functional Requirements of Buildings (Other than industrial buildings) BIS, SP-41 (S&T), (1987).

[26] Shaun Eric. Analysis of variance, statistics and data analysis, Europe online supplement, High Wycombe, Buckinghamshire; RHM Technology Ltd. pp.9-12.

[27] Smith Eric. Uncertainty analysis, Encyclopedia of environmentrics, vol. 4; 2002; ISBN 0471 899976; (2002), 2283-2297.

[28] Ashok Kumar, Rajesh Deoliya, P.S. Chani. Enhancement of thermal performance of opaque wall assemblies of existing buildings by applying retrofit insulation submitted to Journal of The Indian Institute of Architects (2014).

[29] Design builder (student version. 1. 8. 1. 001, 30 days trial v3. 4. 0. 041): Available online at: http: /www. designbuilder . co. uk / [Accessed January 2014].