Hydrogen Concentration Measurements at Titanium Layers by Means of Thermo-EMF

Abstract:

The thermo-emf and electrical resistivity of hydrogenated titanium were measured. Hydrogen concentration in titanium varies from 0.005 to 0.25%. We have compared the methods regarding their sensitivity to the alteration of thermo-emf and electrical resistivity during titanium hydrogenation. The accuracy of the obtained results was verified by comparing them with the results for palladium. It was demonstrated that the method implementing thermo-emf is sensitive to hydrogen concentration in titanium at different depth of the alloy. On the basis of performed measurements, we have proposed a graphical method for detecting the change in titanium structure.

• Periodical: Key Engineering Materials (Volume 683)
• Pages: 199-202
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.683.199
• Online since: February 2016
• Authors: Andrey M. Lider, Vitalii V. Larionov*, Maxim S. Syrtanov
• Keywords: Commercially Pure Titanium, Conductivity, Hydrogen, Thermal EMF

References

[1] D. Eliezer, N. Eliaz, O.N. Senkov, F.H. Froes, Positive effects of hydrogen in metals, Mater. Sci. Eng. A280 (2000) 220-224.

DOI: 10.1016/s0921-5093(99)00670-x

[2] N. Eliaz, D. Eliezer, An overview of hydrogen interaction with amorphous alloys, Adv. Perf. Mater. 6(1) (1999) 5-31.

[3] B.A. Kolachev, D.V. Talalaev, Toutoch Titanium, third ed., Aviation Publishing House, Moscow (in Russian), (1993).

[4] M.I. Luppo, A. Politi, G. Vigna, Hydrides in a-Ti: Characterization and effect of applied external stresses, Acta Mat. 53 (2005) 4987-4996.

DOI: 10.1016/j.actamat.2005.06.004

[5] Y.S. Bordulev, R.S. Laptev, V.N. Kudiiarov, A.M. Lider, Investigation of commercially pure titanium structure during accumulation and release of hydrogen by means of positron lifetime and electrical resistivity measurements, Adv. Mater. Res. 880 (2014).

DOI: 10.4028/www.scientific.net/amr.880.93

[6] R.S. Laptev, Y.S. Bordulev, V.N. Kudiiarov, A.M. Lider, G.V. Garanin, Positron annihilation spectroscopy of defects in commercially pure titanium saturated with hydrogen, Adv. Mater. Res. 880 (2014) 134-140.

DOI: 10.4028/www.scientific.net/amr.880.134

[7] A.S. Karolik, A.A. Luhvich, Calculation of electrical resistivity produced by dislocation and grain boudnaries in metals, J. Phys: Condens Mater. 6 (1994) 873-886.

DOI: 10.1088/0953-8984/6/4/007

[8] V.N. Kudiiarov, A.M. Lider, S.Y. Harchenko, Hydrogen accumulation in technically pure titanium alloy at saturation from gas atmosphere, Adv. Mater. Res. 880 (2014) 68-74.

DOI: 10.4028/www.scientific.net/amr.880.68

[9] S.P. Коbeleva, Methods for measuring the electrical parameters of single-crystal silicon (Overview), Industrial Laboratory (in Russian). 73 (2007) 60-67.

[10] A.S. Karolik, Electrical resistance and thermal EMF of sub-boundaries in compact submicrostructures. copper, Mater. Sci. (Materialovedenie in Russian). 4 (2011) 15-19.

[11] V.V. Larionov, A. M. Lider, G.V. Garanin, Eddy current analysis for nuclear power materials, Adv. Mater. Res. 1085 (2015) 335-339.

DOI: 10.4028/www.scientific.net/amr.1085.335

[12] Van der Voort, E.P. Guot, On the electrical resistivity by scattering on metallic grain boundaries. Phys. Stat. Solid. 38 (1970) 409-414.

[13] P.V. Geld, P.A. Ryabov, L.P. Mohracheva, Hydrogen and Physical Properties of Metals and Alloys, third ed., Nauka, Moscow (in Russian), (1985).