Isothermal Backward Extrusion of Thick-Walled Anisotropic Pipe Blanks in Mode of Short-Time Creeping

Abstract:

Provided here is a mathematical model of the operation of backward extrusion in the mode of short-time creeping of thick-walled pipe blanks made out of orthotropic material with cylindrical anisotropy of the mechanical properties. Carried out was theoretical research of the operation of isothermal axisymmetric backward extrusion of thick-walled pipe blanks made out of anisotropic materials by conic point-tool in the mode of short-time creeping. Established were regularities regarding the change of material flow kinematics, regarding the stressed and strained condition of the blank, regarding force modes and limit possibilities of deformation depending on the technological parameters, on friction conditions on the contact surfaces of the operating tools and of the blank, regarding the geometrical dimensions of the blank and of the manufactured part, and of the anisotropy of the mechanical properties of the blank material, that on the basis of the developed mathematical model of isothermal non-radial flow of anisotropic material under conditions of axisymmetric stressed and strained conditions in the mode of short-time creeping. Experimental operations were carried out for isothermal backward extrusion of thick-walled pipe blanks made out of АМг6 aluminum and ВТ6С titanium alloys. Comparing the results of theoretical and experimental data for force modes of the operation of isothermal backward extrusion of thick-walled pipe blanks points to their satisfactory similarity (difference not exceeding 5% - 10%).

• Periodical: Key Engineering Materials (Volume 684)
• Pages: 143-151
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.684.143
• Online since: February 2016
• Authors: Sergey Sergeevich Yakovlev, Aleksey Alekseevich Perepelkin, Andrey Aleksandrovich Pasynkov
• Keywords: Anisotropic Material, Backward Extrusion, Damage Rate, Destruction, Force, Mathematical Model, Short-Time Creep, Strain, Stress

References

[1] L.A. Shofman. Theory and evaluation processes of cold stamping. M.: Engineering, 1964. 365 pp.

[2] V.P. Romanovsky. Guide to cold forming. L.: Engineering, 1979. 520 pp.

[3] E.A. Popov, V.G. Kovalev, I.N. Shubin. Technology and automation of stamping. M .: Publishing House of the MSTU. N.E. Bauman, 2000. 480 pp.

[4] The theory of plastic deformation of metals / E.P. Unksov, William Johnson, V. L . Kolmogorov et al. / Ed. E.P. Unksov, A.G. Ovchinnikov. M .: Engineering, 1983. 598 pp.

[5] Forging and Stamping: Reference: In 4 vv. V4. Stamping / Gen. Ed. S.S. Yakovlev; Ed. Board: E.I. Semenov (chair), and others. 2nd ed., Rev. and add. M .: Engineering, 2010. 732 pp.

[6] Theory of metal forming / Textbook for high schools / V.A. Golenkov, S.P. Yakovlev, S.A. Golovin, S.S. Yakovlev, V.D. Kuhar / Ed. V.A. Golenkov, S.P. Yakovlev. M .: Engineering, 2010. 442 pp.

[7] N.N. Malinin. Creep in the processing of metals. M .: Engineering, 1986. 216 pp.

[8] K.I. Romanov. Mechanics of hot metal forming. M .: Engineering, 1993. 240 pp.

[9] Isothermal deformation of highly anisotropic materials / S.P. Yakovlev, V.N. Chudin, S.S. Yakovlev, J.A. Sobolev. M .: Engineering, 2004. 427 pp.

[10] Isothermal deformation of anisotropic materials with blunt tools in the mode of short-term creep / S.S. Yakovlev, S.P. Yakovlev, V.N. Chudin, V.I. Tregubov, A.V. Chernyaev. M .: Engineering, 2009. 412 pp.

[11] Y.M. Aryshensky, F.V. Grechnikov. Theory and calculations of plastic deformation of anisotropic materials. M .: Metallurgy, 1990. 304 pp.

[12] Grechnikov FV The deformation of anisotropic materials. M .: Engineering, 1998. 446 pp.

[13] V.D. Golovlev. Calculations of stamping processes. M .: Engineering, 1974. 136 pp.

[14] S.P. Yakovlev, V.D. Kuhar. Punching of anisotropic blanks. M .: Engineering, 1986. 136 pp.

[15] S.P. Yakovlev, S.S. Yakovlev, V.A. Andreichenko. Forming of anisotropic materials. Kishinev: Quant. 1997. 331 p.

[16] S.S. Yakovlev, V.D. Kuhar, V.I. Tregubov. Theory and technology of forming anisotropic materials / ed. S.S. Yakovlev. M .: Engineering, 2012. 400 pp.

[17] V.L. Kolmogorov. Mechanics of metal forming. Yekaterinburg: Ural State Technical University (UPI), 2001. 836 p.

[18] A.A. Bogatov. Mechanical properties and fracture model of metals. Yekaterinburg: SEI HPE Ural State Technical University, 2002. 329 pp.

[19] H. Zhang, X. Li, W. Tang, X. Deng, , A.P. Reynolds, M.A. Sutton Heat transfer modeling of the friction extrusion process / Journal of Materials Processing Technology. Volume 221, July 2015, Pages 21–30.

DOI: 10.1016/j.jmatprotec.2015.01.032

[20] Matthias Haase, A. Erman Tekkaya Cold extrusion of hot extruded aluminum chips / Journal of Materials Processing Technology. Volume 217, March 2015, Pages 356–367.

DOI: 10.1016/j.jmatprotec.2014.11.028

[21] Peter Krizika, Martin Baloga, Emilia Illekovab, Peter Svec Sr. b, Igor Matkob, Matej Stepaneka, Martin Noskoa, Frantisek Simancika The oxidation behavior of gas-atomized Al and Al alloy powder green compacts during heating before hot extrusion and the suggested heating process / Journal of Materials Processing Technology. Volume 214, Issue 6, June 2014, Pages 1165–1172.

DOI: 10.1016/j.jmatprotec.2014.01.003

[22] Hong-ye Li, Min Xia, Zhen Zhao, Yu Zheng An experimental study on local thickening laws based on multi-plate extrusion / Journal of Materials Processing Technology. Volume 213, Issue 7, July 2013, Pages 1213–1220.

DOI: 10.1016/j.jmatprotec.2013.01.014

[23] Marcus Engelhardt, Norbert Grittner, Hermann von Senden genannt Haverkamp, Wilfried Reimche, Dirk Bormann, Friedrich-Wilhelm Bach Extrusion of hybrid sheet metals / Journal of Materials Processing Technology. Volume 212, Issue 5, May 2012, Pages 1030–1038.

DOI: 10.1016/j.jmatprotec.2011.12.013

[24] Wenxiong He, Erde Wang, Lianxi Hu, Yang Yu, Hongfei Sun Effect of extrusion on microstructure and properties of a submicron crystalline Cu–5 wt. %Cr alloy / Journal of Materials Processing Technology. Volume 208, Issues 1–3, 21 November 2008, Pages 205–210.

DOI: 10.1016/j.jmatprotec.2007.12.107

[25] Nicolas Fiétiera, Yves Krähenbühlb, Matthieu Vialardb New methods for the fast simulations of the extrusion process of hot metals / Journal of Materials Processing Technology. Volume 209, Issue 5, 1 March 2009, Pages 2244–2259.

DOI: 10.1016/j.jmatprotec.2008.05.022