Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates

Sarawut Prasertsri; Sansanee Srichan

doi:10.4028/www.scientific.net/KEM.751.332

Paper Titles

Mechanical Behavior of Polystyrene-Grafted Natural Rubber/Natural Rubber Blend: Effect of Polystyrene Grafting Percentage
p.308

Degradation of Silica-Reinforced Natural Rubber by UV Radiation and Humidity in Soil
p.314

Degradation Test of Natural Rubber/Chitosan Composite
p.320

Low Haze and Antifog Performance of 2-Layer Poly(Lactic Acid) Based Films
p.326

Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates
p.332

Mechanical and Thermal Properties of PLA Melt Blended with High Molecular Weight PEG Modified with Peroxide and Organo-Clay
p.337

Poly(Lactic Acid)-Polybutylene Succinate-Activated Carbon Composite Foams
p.344

Development of Water Assisted Solid State Reaction for the Ceramic Materials
p.353

Slip Degassing to Improve the Properties of Slip Cast and Reaction Bonded Si₃N₄
p.358

HomeKey Engineering MaterialsKey Engineering Materials Vol. 751Influence of Pyrolytic Carbon Black Prepared from...

Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates

Abstract:

This research aimed to investigate the possibility of pyrolytic carbon black (PCB) used as filler in natural rubber (NR) and its effect on Mooney viscosity, cure characteristics and mechanical properties compared with commercial carbon black (N774). The results revealed that Mooney viscosity, stiffness and heat build-up tended to increase with increasing both PCB and N774 loading, whereas elongation at break decreased. However, the maximum tensile and tear strengths appeared at the optimum filler loading for both PCB and N774. At similar filler content, PCB-filled NR compounds have higher cure time, heat build-up and thermal resistance. Nevertheless, they exhibited lower Mooney viscosity and mechanical properties compared to N774-filled NR. Finally, it can be concluded that PCB could be utilized as filler in NR compound to act as semi-reinforcing filler and was classified as a filler to reduce costs.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 751)

Pages:

332-336

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.751.332

Citation:

Cite this paper

Online since:

August 2017

Authors:

Sarawut Prasertsri*, Sansanee Srichan

Keywords:

Mechanical Properties, Natural Rubber, Pyrolytic Carbon Black, Waste Tires

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Information on http: /www. huayinenergy. com.

Google Scholar

[2] S. Ramarad, M. Khalid, C.T. Ratnam, A.L. Chuah, W. Rashmi, Waste tire rubber in polymer blends: A review on the evolution, properties and future. Prog. Mater. Sci. 72 (2015) 100-140.

DOI: 10.1016/j.pmatsci.2015.02.004

Google Scholar

[3] C. J. Norris, M. Hale, M. Bennett, Pyrolytic carbon: factors controlling in-rubber performance, Plastics, Rubber and Composites, 43 (2014) 245-256.

DOI: 10.1179/1743289814y.0000000088

Google Scholar

[4] F. Cataldo, Preparation of pyrolytic carbon black from scrap tire rubber crumb and evaluation in new rubber compounds. Macromol. Mater. Eng. 290 (2005) 463-467.

DOI: 10.1002/mame.200400388

Google Scholar

[5] X. Zhang, T. Wang, L. Ma, J. Chang, Vacuum pyrolysis of waste tires with basic additives. Waste Manage. 28 (2008) 2301-2310.

DOI: 10.1016/j.wasman.2007.10.009

Google Scholar

[6] S. Prasertsri, N. Rattanasom, Fumed and precipitated silica reinforced natural rubber composites prepared from latex system: Mechanical and dynamic properties, Polym. Test. 31 (2012) 593-605.

DOI: 10.1016/j.polymertesting.2012.03.003

Google Scholar

[7] P. Sae-oui, U. Thepsuwan, P. Thaptong, C. Sirisinha, Comparison of reinforcing efficiency of carbon black, conductive carbon black, and carbon nanotube in natural rubber, Adv. Polym. Technol. 33 (2014) 21422.

DOI: 10.1002/adv.21422

Google Scholar